40c053ae9fMore changes trying to get bi-directional frequency changes to work. The problem is that I can't control/predict where the H/W frequency will be relative to the VFO frequency.
kc4upr
Rob French2020-10-27 12:45:14 -0500
b3887bc68dSimplified, solved the tuning step problem, but now tuning is backwards again (if I disable Swap I/Q), or just wrong (if I enable Swap I/Q).Rob French2020-09-29 11:48:12 -0500
623956731cCommitting since I'm about to make a large change. Everything is awesome, except that if a large step size is selected on the rig, then the Gqrx can never successfully set the rig freq.Rob French2020-09-29 10:38:56 -0500
769e1ca274Added a simple GUI. Made it so you can toggle on/off "Rig-to-GQRX" and "GQRX-to-Rig". Some of the cases aren't quite right, however. Need to separate out the LNB frequency, and make LNB frequency ALWAYS get updated based on the rig frequency, regardless of whether the the rig frequency is being used to set the GQRX frequency.Rob French2020-09-25 22:57:41 -0500
df4b6e419cUpdate 'README.md'
Rob French
2020-09-22 15:25:03 +0000
f41716f89bUpdated README.md
Rob French
2020-09-22 15:16:34 +0000
27aa7edcc0Updated to make the frequency read out correctly (positive numbers). Notes: - Rig-to-GQRX seems to work. - GQRX-to-Rig seems to work. - Frequency scale increases left to right. - Frequency scale uses positive numbers. So, seems to be functioning, but needs more extensive testing.Rob French2020-09-21 23:07:17 -0500
4948c79d84Seems to be a successful attempt at allowing both: (a) rig to control GQRX (b) GQRX to control rig There's a 0.5 second hang time whenever a given input is made, to prevent dueling inputs. The key thing appears to be, whenever GQRX sets the frequency, I need to tell the rig, but then also, tell GQRX again, so that it centers up the frequency. Other thing to note is that the frequencies are all negative. I wonder if that is actually necessary.Rob French2020-09-20 23:30:40 -0500
44a0db9894Saving off what I've created. It doesn't work well, yet.Rob French2020-09-12 22:42:46 -0500
cea01b2ac5Added additional command-line arguments, to allow use with a remote rigctld and/or Gqrx instance.Rob French2020-05-11 03:36:02 +0000
858046cb2fClose sockets without catching exceptions
master
Alexander Fasching
2017-12-07 00:47:14 +0100
4ea0cbe677Working version with README and license
Alexander Fasching
2017-12-06 23:35:24 +0100