mirror of
https://github.com/rfivet/stm32bringup.git
synced 2024-11-14 00:25:58 -05:00
262 lines
7.8 KiB
C
262 lines
7.8 KiB
C
/* txeie.c -- system layer
|
|
** Copyright (c) 2020 Renaud Fivet
|
|
**
|
|
** interrupt based serial transmission
|
|
** clocks configuration: HSI, HSE, PLL HSI, PLL HSE
|
|
** implements system.h interface: uptime, init(), kputc(), kputs(), yield()
|
|
** uptime = seconds elapsed since boot
|
|
** Serial tx, SysClck 8MHz HSI based, baudrate 9600, Busy wait transmission
|
|
** user LED toggled every second
|
|
** SysTick interrupt every second
|
|
*/
|
|
|
|
#include "system.h" /* implements system.h */
|
|
|
|
|
|
/** CORE **********************************************************************/
|
|
|
|
#define SYSTICK ((volatile long *) 0xE000E010)
|
|
#define SYSTICK_CSR SYSTICK[ 0]
|
|
#define SYSTICK_RVR SYSTICK[ 1]
|
|
#define SYSTICK_CVR SYSTICK[ 2]
|
|
|
|
#define NVIC ((volatile long *) 0xE000E100)
|
|
#define NVIC_ISER NVIC[ 0]
|
|
#define unmask_irq( idx) NVIC_ISER = 1 << idx
|
|
#define USART1_IRQ_IDX 27
|
|
|
|
|
|
/** PERIPH ********************************************************************/
|
|
|
|
#define CAT( a, b) a##b
|
|
#define HEXA( a) CAT( 0x, a)
|
|
#define RCC ((volatile long *) 0x40021000)
|
|
|
|
#define RCC_CR RCC[ 0]
|
|
#define RCC_CR_HSION 0x00000001 /* 1: Internal High Speed clock enable */
|
|
#define RCC_CR_HSEON 0x00010000 /* 16: External High Speed clock enable */
|
|
#define RCC_CR_HSERDY 0x00020000 /* 17: External High Speed clock ready flag */
|
|
#define RCC_CR_PLLON 0x01000000 /* 24: PLL enable */
|
|
#define RCC_CR_PLLRDY 0x02000000 /* 25: PLL clock ready flag */
|
|
|
|
#define RCC_CFGR RCC[ 1]
|
|
#define RCC_CFGR_SW_MSK 0x00000003 /* 1-0: System clock SWitch Mask */
|
|
#define RCC_CFGR_SW_HSE 0x00000001 /* 1-0: Switch to HSE as system clock */
|
|
#define RCC_CFGR_SW_PLL 0x00000002 /* 1-0: Switch to PLL as system clock */
|
|
#define RCC_CFGR_SWS_MSK 0x0000000C /* 3-2: System clock SWitch Status Mask */
|
|
#define RCC_CFGR_SWS_HSE 0x00000004 /* 3-2: HSE used as system clock */
|
|
#define RCC_CFGR_SWS_PLL 0x00000008 /* 3-2: PLL used as system clock */
|
|
#define RCC_CFGR_PLLSRC 0x00010000
|
|
#define RCC_CFGR_PLLSRC_HSI 0x00000000 /* HSI / 2 */
|
|
#define RCC_CFGR_PLLSRC_HSE 0x00010000 /* HSE */
|
|
#define RCC_CFGR_PLLXTPRE 0x00020000
|
|
#define RCC_CFGR_PLLXTPRE_DIV1 0x00000000 /* HSE */
|
|
#define RCC_CFGR_PLLXTPRE_DIV2 0x00020000 /* HSE / 2 */
|
|
#define RCC_CFGR_PLLMUL_MSK (0x00F << 18)
|
|
#define RCC_CFGR_PLLMUL( v) ((v - 2) << 18)
|
|
|
|
#define RCC_AHBENR RCC[ 5]
|
|
#define RCC_AHBENR_IOP( h) (1 << (17 + HEXA( h) - 0xA))
|
|
|
|
#define RCC_APB2ENR RCC[ 6]
|
|
#define RCC_APB2ENR_USART1EN 0x00004000 /* 14: USART1 clock enable */
|
|
|
|
#define GPIOA ((volatile long *) 0x48000000)
|
|
#define GPIOB ((volatile long *) 0x48000400)
|
|
#define GPIO( x) CAT( GPIO, x)
|
|
#define MODER 0
|
|
#define ODR 5
|
|
#define AFRH 9
|
|
|
|
#define USART1 ((volatile long *) 0x40013800)
|
|
#define CR1 0 /* Config Register */
|
|
#define BRR 3 /* BaudRate Register */
|
|
#define ISR 7 /* Interrupt and Status Register */
|
|
#define TDR 10 /* Transmit Data Register*/
|
|
#define USART_CR1_TXEIE (1 << 7) /* 7: TDR Empty Interrupt Enable */
|
|
#define USART_CR1_TE 8 /* 3: Transmit Enable */
|
|
#define USART_CR1_RE 4 /* 2: Receive Enable */
|
|
#define USART_CR1_UE 1 /* 0: USART Enable */
|
|
#define USART_ISR_TXE (1 << 7) /* 7: Transmit Data Register Empty */
|
|
|
|
/* user LED ON when PA4 is low */
|
|
#define LED_IOP A
|
|
#define LED_PIN 4
|
|
#define LED_ON 0
|
|
/* 8MHz quartz, configure PLL at 24MHz */
|
|
#define HSE 8000000
|
|
#define PLL 6
|
|
#define BAUD 9600
|
|
|
|
#ifdef PLL
|
|
# ifdef HSE
|
|
# define CLOCK HSE / 2 * PLL
|
|
# else /* HSI */
|
|
# define CLOCK 8000000 / 2 * PLL
|
|
# endif
|
|
# if CLOCK < 16000000
|
|
# error PLL output below 16MHz
|
|
# endif
|
|
#elif defined( HSE)
|
|
# define CLOCK HSE
|
|
#else /* HSI */
|
|
# define CLOCK 8000000
|
|
#endif
|
|
|
|
#if CLOCK > 48000000
|
|
# error clock frequency exceeds 48MHz
|
|
#endif
|
|
|
|
#if CLOCK % BAUD
|
|
# warning baud rate not accurate at that clock frequency
|
|
#endif
|
|
|
|
static unsigned char txbuf[ 8] ; // best if size is a power of 2 for cortex-M0
|
|
#define TXBUF_SIZE (sizeof txbuf / sizeof txbuf[ 0])
|
|
static unsigned char txbufin ;
|
|
static volatile unsigned char txbufout ;
|
|
|
|
void USART1_Handler( void) {
|
|
if( txbufout == txbufin) {
|
|
/* Empty buffer => Disable TXEIE */
|
|
USART1[ CR1] &= ~USART_CR1_TXEIE ;
|
|
} else {
|
|
static unsigned char lastc ;
|
|
unsigned char c ;
|
|
|
|
c = txbuf[ txbufout] ;
|
|
if( c == '\n' && lastc != '\r')
|
|
c = '\r' ;
|
|
else
|
|
txbufout = (txbufout + 1) % TXBUF_SIZE ;
|
|
|
|
USART1[ TDR] = c ;
|
|
lastc = c ;
|
|
}
|
|
}
|
|
|
|
void kputc( unsigned char c) { /* character output */
|
|
int nextidx ;
|
|
|
|
/* Wait if buffer full */
|
|
nextidx = (txbufin + 1) % TXBUF_SIZE ;
|
|
while( nextidx == txbufout)
|
|
yield() ;
|
|
|
|
txbuf[ txbufin] = c ;
|
|
txbufin = nextidx ;
|
|
/* Trigger transmission by enabling interrupt */
|
|
USART1[ CR1] |= USART_CR1_TXEIE ;
|
|
}
|
|
|
|
int kputs( const char s[]) { /* string output */
|
|
int cnt = 0 ;
|
|
int c ;
|
|
|
|
while( (c = *s++) != 0) {
|
|
kputc( c) ;
|
|
cnt += 1 ;
|
|
}
|
|
|
|
return cnt ;
|
|
}
|
|
|
|
void yield( void) { /* give way */
|
|
__asm( "WFI") ; /* Wait for System Tick Interrupt */
|
|
}
|
|
|
|
volatile unsigned uptime ; /* seconds elapsed since boot */
|
|
|
|
#ifdef LED_ON
|
|
static void userLEDtoggle( void) {
|
|
GPIO( LED_IOP)[ ODR] ^= 1 << LED_PIN ; /* Toggle User LED */
|
|
}
|
|
#endif
|
|
|
|
void SysTick_Handler( void) {
|
|
uptime += 1 ;
|
|
#ifdef LED_ON
|
|
userLEDtoggle() ;
|
|
#endif
|
|
}
|
|
|
|
int init( void) {
|
|
/* By default SYSCLK == HSI [8MHZ] */
|
|
|
|
#ifdef HSE
|
|
/* Start HSE clock (8 MHz external oscillator) */
|
|
RCC_CR |= RCC_CR_HSEON ;
|
|
/* Wait for oscillator to stabilize */
|
|
do {} while( (RCC_CR & RCC_CR_HSERDY) == 0) ;
|
|
#endif
|
|
|
|
#ifdef PLL
|
|
/* Setup PLL HSx/2 * 6 [24MHz] */
|
|
/* Default 0: PLL HSI/2 src, PLL MULL * 2 */
|
|
RCC_CFGR =
|
|
# ifdef HSE
|
|
RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_DIV2 |
|
|
# endif
|
|
RCC_CFGR_PLLMUL( PLL) ;
|
|
RCC_CR |= RCC_CR_PLLON ;
|
|
do {} while( (RCC_CR & RCC_CR_PLLRDY) == 0) ; /* Wait for PLL */
|
|
|
|
/* Switch to PLL as system clock SYSCLK == PLL [24MHz] */
|
|
RCC_CFGR = (RCC_CFGR & ~RCC_CFGR_SW_MSK) | RCC_CFGR_SW_PLL ;
|
|
do {} while( (RCC_CFGR & RCC_CFGR_SWS_MSK) != RCC_CFGR_SWS_PLL) ;
|
|
#elif defined( HSE)
|
|
/* Switch to HSE as system clock SYSCLK == HSE [8MHz] */
|
|
RCC_CFGR = (RCC_CFGR & ~RCC_CFGR_SW_MSK) | RCC_CFGR_SW_HSE ;
|
|
do {} while( (RCC_CFGR & RCC_CFGR_SWS_MSK) != RCC_CFGR_SWS_HSE) ;
|
|
#endif
|
|
|
|
#ifdef HSE
|
|
/* Switch off HSI */
|
|
RCC_CR &= ~RCC_CR_HSION ;
|
|
#endif
|
|
|
|
/* SYSTICK */
|
|
SYSTICK_RVR = CLOCK / 8 - 1 ; /* HBA / 8 */
|
|
SYSTICK_CVR = 0 ;
|
|
SYSTICK_CSR = 3 ; /* HBA / 8, Interrupt ON, Enable */
|
|
/* SysTick_Handler will execute every 1s from now on */
|
|
|
|
#ifdef LED_ON
|
|
/* User LED ON */
|
|
RCC_AHBENR |= RCC_AHBENR_IOP( LED_IOP) ; /* Enable IOPx periph */
|
|
GPIO( LED_IOP)[ MODER] |= 1 << (LED_PIN * 2) ; /* LED_IO Output [01],
|
|
** over default 00 */
|
|
/* OTYPER Push-Pull by default */
|
|
/* Pxn output default LOW at reset */
|
|
# if LED_ON
|
|
userLEDtoggle() ;
|
|
# endif
|
|
#endif
|
|
|
|
/* USART1 9600 8N1 */
|
|
RCC_AHBENR |= RCC_AHBENR_IOP( A) ; /* Enable GPIOA periph */
|
|
GPIOA[ MODER] |= 0x0A << (9 * 2) ; /* PA9-10 ALT 10, over default 00 */
|
|
GPIOA[ AFRH] |= 0x110 ; /* PA9-10 AF1 0001, over default 0000 */
|
|
RCC_APB2ENR |= RCC_APB2ENR_USART1EN ;
|
|
USART1[ BRR] = CLOCK / BAUD ; /* PCLK is default source */
|
|
USART1[ CR1] |= USART_CR1_UE | USART_CR1_TE ; /* Enable USART & Tx */
|
|
|
|
/* Unmask USART1 irq */
|
|
unmask_irq( USART1_IRQ_IDX) ;
|
|
|
|
kputs(
|
|
#ifdef PLL
|
|
"PLL"
|
|
#endif
|
|
#ifdef HSE
|
|
"HSE"
|
|
#else
|
|
"HSI"
|
|
#endif
|
|
"\n") ;
|
|
|
|
return 0 ;
|
|
}
|
|
|
|
/* end of txeie.c */
|