diff --git a/ubitx_cat.cpp b/ubitx_cat.cpp index 66ffabb..d4992b9 100644 --- a/ubitx_cat.cpp +++ b/ubitx_cat.cpp @@ -17,24 +17,32 @@ static unsigned long rxBufferArriveTime = 0; static byte rxBufferCheckCount = 0; -#define CAT_RECEIVE_TIMEOUT 500 -static byte cat[5]; + +static uint8_t cat[5];//Data is ordered parameters 1-4, then command code last +enum CatDataIndex_e : uint8_t { + P1 = 0, + P2 = 1, + P3 = 2, + P4 = 3, + CMD = 4 +}; + static byte insideCat = 0; //for broken protocol -#define CAT_RECEIVE_TIMEOUT 500 +static const uint16_t CAT_RECEIVE_TIMEOUT = 500; -#define CAT_MODE_LSB 0x00 -#define CAT_MODE_USB 0x01 -#define CAT_MODE_CW 0x02 -#define CAT_MODE_CWR 0x03 -#define CAT_MODE_AM 0x04 -#define CAT_MODE_FM 0x08 -#define CAT_MODE_DIG 0x0A -#define CAT_MODE_PKT 0x0C -#define CAT_MODE_FMN 0x88 +static const uint8_t CAT_MODE_LSB = 0x00; +static const uint8_t CAT_MODE_USB = 0x01; +static const uint8_t CAT_MODE_CW = 0x02; +static const uint8_t CAT_MODE_CWR = 0x03; +static const uint8_t CAT_MODE_AM = 0x04; +static const uint8_t CAT_MODE_FM = 0x08; +static const uint8_t CAT_MODE_DIG = 0x0A; +static const uint8_t CAT_MODE_PKT = 0x0C; +static const uint8_t CAT_MODE_FMN = 0x88; -#define ACK 0 +static const uint8_t ACK = 0; unsigned int skipTimeCount = 0; @@ -113,11 +121,11 @@ unsigned long readFreq(byte* cmd) { void catReadEEPRom(void) { //for remove warnings - byte temp0 = cat[0]; - byte temp1 = cat[1]; + byte temp0 = cat[P1]; + byte temp1 = cat[P2]; - cat[0] = 0; - cat[1] = 0; + cat[P1] = 0; + cat[P2] = 0; //for remove warnings[1] = 0; switch (temp1) @@ -125,15 +133,15 @@ void catReadEEPRom(void) case 0x45 : // if (temp0 == 0x03) { - cat[0] = 0x00; - cat[1] = 0xD0; + cat[P1] = 0x00; + cat[P2] = 0xD0; } break; case 0x47 : // if (temp0 == 0x03) { - cat[0] = 0xDC; - cat[1] = 0xE0; + cat[P1] = 0xDC; + cat[P2] = 0xE0; } break; case 0x55 : @@ -145,8 +153,8 @@ void catReadEEPRom(void) //5 : Memory/MTUNE select 0 = Memory, 1 = MTUNE //6 : //7 : MEM/VFO Select 0 = Memory, 1 = VFO (A or B - see bit 0) - cat[0] = 0x80 + ((VFO_B == globalSettings.activeVfo) ? 1 : 0); - cat[1] = 0x00; + cat[P1] = 0x80 + ((VFO_B == globalSettings.activeVfo) ? 1 : 0); + cat[P2] = 0x00; break; case 0x57 : // //0 : 1-0 AGC Mode 00 = Auto, 01 = Fast, 10 = Slow, 11 = Off @@ -156,8 +164,8 @@ void catReadEEPRom(void) //6 Lock On/Off 0 = Off, 1 = On (Dial Lock) //7 FST (Fast Tuning) On/Off 0 = Off, 1 = On (Fast tuning) - cat[0] = 0xC0; - cat[1] = 0x40; + cat[P1] = 0xC0; + cat[P2] = 0x40; break; case 0x59 : // band select VFO A Band Select 0000 = 160 M, 0001 = 75 M, 0010 = 40 M, 0011 = 30 M, 0100 = 20 M, 0101 = 17 M, 0110 = 15 M, 0111 = 12 M, 1000 = 10 M, 1001 = 6 M, 1010 = FM BCB, 1011 = Air, 1100 = 2 M, 1101 = UHF, 1110 = (Phantom) //http://www.ka7oei.com/ft817_memmap.html @@ -165,59 +173,58 @@ void catReadEEPRom(void) //CAT_BUFF[1] = 0x82; break; case 0x5C : //Beep Volume (0-100) (#13) - cat[0] = 0xB2; - cat[1] = 0x42; + cat[P1] = 0xB2; + cat[P2] = 0x42; break; case 0x5E : //3-0 : CW Pitch (300-1000 Hz) (#20) From 0 to E (HEX) with 0 = 300 Hz and each step representing 50 Hz //5-4 : Lock Mode (#32) 00 = Dial, 01 = Freq, 10 = Panel //7-6 : Op Filter (#38) 00 = Off, 01 = SSB, 10 = CW //CAT_BUFF[0] = 0x08; - cat[0] = (globalSettings.cwSideToneFreq - 300)/50; - cat[1] = 0x25; + cat[P1] = (globalSettings.cwSideToneFreq - 300)/50; + cat[P2] = 0x25; break; case 0x61 : //globalSettings.cwSideToneFreq (Volume) (#44) - cat[0] = globalSettings.cwSideToneFreq % 50; - cat[1] = 0x08; + cat[P1] = globalSettings.cwSideToneFreq % 50; + cat[P2] = 0x08; break; case 0x5F : // //4-0 CW Weight (1.:2.5-1:4.5) (#22) From 0 to 14 (HEX) with 0 = 1:2.5, incrementing in 0.1 weight steps //5 420 ARS (#2) 0 = Off, 1 = On //6 144 ARS (#1) 0 = Off, 1 = On //7 Sql/RF-G (#45) 0 = Off, 1 = On - cat[0] = 0x32; - cat[1] = 0x08; + cat[P1] = 0x32; + cat[P2] = 0x08; break; case 0x60 : //CW Delay (10-2500 ms) (#17) From 1 to 250 (decimal) with each step representing 10 ms - cat[0] = globalSettings.cwActiveTimeoutMs / 10; - cat[1] = 0x32; + cat[P1] = globalSettings.cwActiveTimeoutMs / 10; + cat[P2] = 0x32; break; case 0x62 : // //5-0 CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps) //7-6 Batt-Chg (6/8/10 Hours (#11) 00 = 6 Hours, 01 = 8 Hours, 10 = 10 Hours //CAT_BUFF[0] = 0x08; - cat[0] = 1200 / globalSettings.cwDitDurationMs - 4; - cat[1] = 0xB2; + cat[P1] = 1200 / globalSettings.cwDitDurationMs - 4; + cat[P2] = 0xB2; break; case 0x63 : // //6-0 VOX Gain (#51) Contains 1-100 (decimal) as displayed //7 Disable AM/FM Dial (#4) 0 = Enable, 1 = Disable - cat[0] = 0xB2; - cat[1] = 0xA5; + cat[P1] = 0xB2; + cat[P2] = 0xA5; break; case 0x64 : // break; case 0x67 : //6-0 SSB Mic (#46) Contains 0-100 (decimal) as displayed - cat[0] = 0xB2; - cat[1] = 0xB2; - break; case 0x69 : //FM Mic (#29) Contains 0-100 (decimal) as displayed + cat[P1] = 0xB2; + cat[P2] = 0xB2; + break; + case 0x69 : //FM Mic (#29) Contains 0-100 (decimal) as displayed case 0x78 : if (VfoMode_e::VFO_MODE_USB == GetActiveVfoMode()) - cat[0] = CAT_MODE_USB; + cat[P1] = CAT_MODE_USB << 5; else - cat[0] = CAT_MODE_LSB; - - if (cat[0] != 0) cat[0] = 1 << 5; + cat[P1] = CAT_MODE_LSB << 5; break; case 0x79 : // //1-0 TX Power (All bands) 00 = High, 01 = L3, 10 = L2, 11 = L1 @@ -225,8 +232,8 @@ void catReadEEPRom(void) //DW On/Off 0 = Off, 1 = On //SCN (Scan) Mode 00 = No scan, 10 = Scan up, 11 = Scan down //ART On/Off 0 = Off, 1 = On - cat[0] = 0x00; - cat[1] = 0x00; + cat[P1] = 0x00; + cat[P2] = 0x00; break; case 0x7A : //SPLIT //7A 0 HF Antenna Select 0 = Front, 1 = Rear @@ -238,11 +245,11 @@ void catReadEEPRom(void) //7A 6 ? ? //7A 7 SPL On/Off 0 = Off, 1 = On - cat[0] = (globalSettings.splitOn ? 0xFF : 0x7F); + cat[P1] = (globalSettings.splitOn ? 0xFF : 0x7F); break; case 0xB3 : // - cat[0] = 0x00; - cat[1] = 0x4D; + cat[P1] = 0x00; + cat[P2] = 0x4D; break; } @@ -421,8 +428,8 @@ void checkCAT(){ catCount++; /* - if (cat[4] != 0xf7 && cat[4] != 0xbb && cat[4] != 0x03){ - sprintf(b, "%d %02x %02x%02x%02x%02x", catCount, cat[4],cat[0], cat[1], cat[2], cat[3]); + if (cat[CMD] != 0xf7 && cat[CMD] != 0xbb && cat[CMD] != 0x03){ + sprintf(b, "%d %02x %02x%02x%02x%02x", catCount, cat[CMD],cat[P1], cat[P2], cat[P3], cat[P4]); printLine2(b); } */