Remove unused cases

This commit is contained in:
Reed Nightingale 2020-05-03 22:37:38 -07:00
parent 8045b9b02b
commit 2505e54235

View File

@ -215,7 +215,6 @@ void catGetEeprom(const uint16_t read_address, uint8_t* response)
//5 NB On/Off 0 = Off, 1 = On (Noise Blanker)
//6 Lock On/Off 0 = Off, 1 = On (Dial Lock)
//7 FST (Fast Tuning) On/Off 0 = Off, 1 = On (Fast tuning)
*response = 0xC0;
break;
case Ft817Eeprom_e::KeyerStatus:
@ -228,12 +227,6 @@ void catGetEeprom(const uint16_t read_address, uint8_t* response)
//7 : VOX on/off: 1 = on
*response = 0x40;
break;
case Ft817Eeprom_e::BandSelect:
//band select VFO A Band Select 0000 = 160 M, 0001 = 75 M, 0010 = 40 M, 0011 = 30 M, 0100 = 20 M, 0101 = 17 M, 0110 = 15 M, 0111 = 12 M, 1000 = 10 M, 1001 = 6 M, 1010 = FM BCB, 1011 = Air, 1100 = 2 M, 1101 = UHF, 1110 = (Phantom)
//http://www.ka7oei.com/ft817_memmap.html
//CAT_BUFF[0] = 0xC2;
//CAT_BUFF[1] = 0x82;
break;
case Ft817Eeprom_e::BeepVolume:
//6-0 : Beep Volume (0-100) (#13)
//7 : Beep Freq: 0 = 440Hz, 1 = 880Hz
@ -289,7 +282,6 @@ void catGetEeprom(const uint16_t read_address, uint8_t* response)
case Ft817Eeprom_e::FmMicVolume:
//6-0 : FM Mic (#29) Contains 0-100 (decimal) as displayed
//7 : Mic Scan (#37) 1 = on
case 0x78 ://??
if (VfoMode_e::VFO_MODE_USB == GetActiveVfoMode()){
*response = OperatingMode_e::USB << 5;
}
@ -297,13 +289,6 @@ void catGetEeprom(const uint16_t read_address, uint8_t* response)
*response = OperatingMode_e::LSB << 5;
}
break;
case Ft817Eeprom_e::TxPower:
//1-0 TX Power (All bands) 00 = High, 01 = L3, 10 = L2, 11 = L1
//3 PRI On/Off 0 = Off, 1 = On
//DW On/Off 0 = Off, 1 = On
//SCN (Scan) Mode 00 = No scan, 10 = Scan up, 11 = Scan down
//ART On/Off 0 = Off, 1 = On
break;
case Ft817Eeprom_e::AntennaSelectAndSplit:
//0 : HF Antenna Select 0 = Front, 1 = Rear
//1 : 6 M Antenna Select 0 = Front, 1 = Rear
@ -313,11 +298,8 @@ void catGetEeprom(const uint16_t read_address, uint8_t* response)
//5 : UHF Antenna Select 0 = Front, 1 = Rear
//6 : ? ?
//7 : SPL On/Off 0 = Off, 1 = On
*response = (globalSettings.splitOn ? 0xFF : 0x7F);
break;
case 0xB3 : //0xB1 is the base address of Base address of VFO A, 40 M.
break;
case 0xB4 : //0xB1 is the base address of Base address of VFO A, 40 M.
//2-0 : FM Step (Menu # 30) 000 = 5 kHz, 001 = 6.25 kHz, 010 = 10 kHz, 011 = 12.5 kHz, 100 = 15 kHz, 101 = 20 kHz, 110 = 25 kHz, 111 = 50 kHz
//5-3 : AM Step (Menu #6) 000 = 2.5 kHz, 001 = 5 kHz, 010 = 9 kHz, 011 = 10 kHz, 100 = 12.5 kHz, 101 = 25 kHz