odie/ubitxv6
1
0
Fork 0
mirror of https://codeberg.org/mclemens/ubitxv6.git synced 2024-11-02 15:17:22 -04:00
Code Issues Packages Projects Releases Wiki Activity

Release Candidate 1

Browse Source
This commit is contained in:
Ashhar Farhan 2019-12-13 00:51:04 +05:30 committed by GitHub
commit 097c106a55
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
10 changed files with 4069 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

111
morse_reader.ino Normal file
View File

@ -0,0 +1,111 @@
/*
* Each byte of the morse table stores one letter.
* The 0 is a dot, a 1 is a dash
* From the Most significant byte onwards, the letter is padded with 1s.
* The first zero after the 1s indicates the start of the letter, it MUST be discarded
*/
struct Morse {
char letter;
unsigned char code;
};
const PROGMEM struct Morse morse_table[] = {
{'a', 0xf9}, // 11111001
{'b', 0xe8}, // 11101000
{'c', 0xea}, // 11101010
{'d', 0xf4}, // 11110100
{'e', 0xfc}, // 11111100
{'f', 0xe4}, // 11100100
{'g', 0xf6}, // 11110110
{'h', 0xe0}, // 11100000
{'i', 0xf8}, // 11111000
{'j', 0xe7}, // 11100111
{'k', 0xf6}, // 11110101
{'l', 0xe4}, // 11100100
{'m', 0xfb}, // 11111011
{'n', 0xfa}, // 11111010
{'o', 0xf7}, // 11110111
{'p', 0xe6}, // 11100110
{'q', 0xed}, // 11101101
{'r', 0xf2}, // 11110010
{'s', 0xf0}, // 11110000
{'t', 0xfd}, // 11111101
{'u', 0xf1}, // 11110001
{'v', 0xe1}, // 11100001
{'w', 0xf3}, // 11110011
{'x', 0xe9}, // 11101001
{'y', 0xe3}, // 11101011
{'z', 0xec}, // 11101100
{'1', 0xcf}, // 11001111
{'2', 0xc7}, // 11000111
{'3', 0xc3}, // 11000011
{'4', 0xc1}, // 11000001
{'5', 0xc0}, // 11000000
{'6', 0xd0}, // 11010000
{'7', 0xd8}, // 11011000
{'8', 0xdc}, // 11011100
{'9', 0xde}, // 11011110
{'0', 0xdf}, // 11011111
{'.', 0xd5}, // 110010101
{'?', 0xd3}, // 110110011
};
void morseLetter(char c){
unsigned char mask = 0x80;
//handle space character as three dashes
if (c == ' '){
active_delay(cwSpeed * 9);
Serial.print(' ');
return;
}
for (int i = 0; i < sizeof(morse_table)/ sizeof(struct Morse); i++){
struct Morse m;
memcpy_P(&m, morse_table + i, sizeof(struct Morse));
if (m.letter == tolower(c)){
unsigned char code = m.code;
//Serial.print(m.letter); Serial.println(' ');
while(mask & code && mask > 1)
mask = mask >> 1;
//now we are at the first zero, skip and carry on
mask = mask >> 1;
while(mask){
tone(CW_TONE, sideTone,10000);
if (mask & code){
delay(3 * (int)cwSpeed);
//Serial.print('-');
}
else{
delay((int)cwSpeed);
//Serial.print('.');
}
//Serial.print('#');
noTone(CW_TONE);
delay((int)cwSpeed); // space between dots and dashes
mask = mask >> 1;
}
//Serial.println('@');
delay(200); // space between letters is a dash (3 dots), one dot's space has already been sent
}
}
}
void morseText(char *text){
// while (1){
noTone(CW_TONE);
delay(1000);
tone(CW_TONE, 600);
delay(1000);
// }
Serial.println(sideTone);
while(*text){
morseLetter(*text++);
}
}

596
tft_gui.ino Normal file
View File

@ -0,0 +1,596 @@
#include <XPT2046_Touchscreen.h>
#include <SPI.h>
//#include "ubitx_font.h"
#include <avr/pgmspace.h>
#define TFT_CS 10
#define TFT_RS 9
// Color definitions
#define ILI9341_BLACK 0x0000 ///< 0, 0, 0
#define ILI9341_NAVY 0x000F ///< 0, 0, 123
#define ILI9341_DARKGREEN 0x03E0 ///< 0, 125, 0
#define ILI9341_DARKCYAN 0x03EF ///< 0, 125, 123
#define ILI9341_MAROON 0x7800 ///< 123, 0, 0
#define ILI9341_PURPLE 0x780F ///< 123, 0, 123
#define ILI9341_OLIVE 0x7BE0 ///< 123, 125, 0
#define ILI9341_LIGHTGREY 0xC618 ///< 198, 195, 198
#define ILI9341_DARKGREY 0x7BEF ///< 123, 125, 123
#define ILI9341_BLUE 0x001F ///< 0, 0, 255
#define ILI9341_GREEN 0x07E0 ///< 0, 255, 0
#define ILI9341_CYAN 0x07FF ///< 0, 255, 255
#define ILI9341_RED 0xF800 ///< 255, 0, 0
#define ILI9341_MAGENTA 0xF81F ///< 255, 0, 255
#define ILI9341_YELLOW 0xFFE0 ///< 255, 255, 0
#define ILI9341_WHITE 0xFFFF ///< 255, 255, 255
#define ILI9341_ORANGE 0xFD20 ///< 255, 165, 0
#define ILI9341_GREENYELLOW 0xAFE5 ///< 173, 255, 41
#define ILI9341_PINK 0xFC18 ///< 255, 130, 198
#define TEXT_LINE_HEIGHT 18
#define TEXT_LINE_INDENT 5
#define BUTTON_PUSH
#define BUTTON_CHECK
#define BUTTON_SPINNER
GFXfont *gfxFont = NULL;
XPT2046_Touchscreen ts(CS_PIN);
TS_Point ts_point;
//filled from a test run of calibration routine
int slope_x=104, slope_y=137, offset_x=28, offset_y=29;
void readTouchCalibration(){
EEPROM.get(SLOPE_X, slope_x);
EEPROM.get(SLOPE_Y, slope_y);
EEPROM.get(OFFSET_X, offset_x);
EEPROM.get(OFFSET_Y, offset_y);
if (slope_x < 10 || 200 < slope_x){
slope_x=104;
slope_y=137;
offset_x=28;
offset_y=29;
}
}
void writeTouchCalibration(){
EEPROM.put(SLOPE_X, slope_x);
EEPROM.put(SLOPE_Y, slope_y);
EEPROM.put(OFFSET_X, offset_x);
EEPROM.put(OFFSET_Y, offset_y);
}
boolean readTouch(){
boolean istouched = ts.touched();
if (istouched) {
ts_point = ts.getPoint();
return true;
}
return false;
}
void scaleTouch(TS_Point *p){
p->x = ((long)(p->x) * 10l)/(long)(slope_x) - offset_x;
p->y = ((long)(p->y) * 10l)/(long)(slope_y) - offset_y;
}
#if !defined(__INT_MAX__) || (__INT_MAX__ > 0xFFFF)
#define pgm_read_pointer(addr) ((void *)pgm_read_dword(addr))
#else
#define pgm_read_pointer(addr) ((void *)pgm_read_word(addr))
#endif
inline GFXglyph * pgm_read_glyph_ptr(const GFXfont *gfxFont, uint8_t c)
{
#ifdef __AVR__
return &(((GFXglyph *)pgm_read_pointer(&gfxFont->glyph))[c]);
#else
// expression in __AVR__ section may generate "dereferencing type-punned pointer will break strict-aliasing rules" warning
// In fact, on other platforms (such as STM32) there is no need to do this pointer magic as program memory may be read in a usual way
// So expression may be simplified
return gfxFont->glyph + c;
#endif //__AVR__
}
inline uint8_t * pgm_read_bitmap_ptr(const GFXfont *gfxFont)
{
#ifdef __AVR__
return (uint8_t *)pgm_read_pointer(&gfxFont->bitmap);
#else
// expression in __AVR__ section generates "dereferencing type-punned pointer will break strict-aliasing rules" warning
// In fact, on other platforms (such as STM32) there is no need to do this pointer magic as program memory may be read in a usual way
// So expression may be simplified
return gfxFont->bitmap;
#endif //__AVR__
}
inline static void utft_write(unsigned char d)
{
SPI.transfer(d);
}
inline static void utftCmd(unsigned char VH)
{
*(portOutputRegister(digitalPinToPort(TFT_RS))) &= ~digitalPinToBitMask(TFT_RS);//LCD_RS=0;
utft_write(VH);
}
inline static void utftData(unsigned char VH)
{
*(portOutputRegister(digitalPinToPort(TFT_RS)))|= digitalPinToBitMask(TFT_RS);//LCD_RS=1;
utft_write(VH);
}
/*
void utftCmd_Data(unsigned char com,unsigned char dat)
{
utftCmd(com);
utftData(dat);
}
*/
static void utftAddress(unsigned int x1,unsigned int y1,unsigned int x2,unsigned int y2)
{
utftCmd(0x2a);
utftData(x1>>8);
utftData(x1);
utftData(x2>>8);
utftData(x2);
utftCmd(0x2b);
utftData(y1>>8);
utftData(y1);
utftData(y2>>8);
utftData(y2);
utftCmd(0x2c);
}
/*
inline void utftQuickfill(int16_t x1, int16_t y1, int16_t w, int16_t h, uint16_t color) {
int16_t x2, y2;
x2 = x1 + w;
y2 = y1 + h;
setAddrWindow(x, y, x2, y2);
writeColor(color, (uint32_t)w * h);
}
*/
void utftPixel(unsigned int x, unsigned int y, unsigned int c)
{
unsigned int i,j;
digitalWrite(TFT_CS,LOW);
utftCmd(0x02c); //write_memory_start
//digitalWrite(RS,HIGH);
//l=l+x;
utftAddress(x,y,x,y);
//j=l*2;
//for(i=1;i<=j;i++)
//{
utftData(c>>8);
utftData(c);
//utftData(c);
//utftData(c);
//}
digitalWrite(TFT_CS,HIGH);
}
void utftHline(unsigned int x, unsigned int y, unsigned int l, unsigned int c)
{
unsigned int i,j;
digitalWrite(TFT_CS,LOW);
utftCmd(0x02c); //write_memory_start
//digitalWrite(RS,HIGH);
l=l+x;
utftAddress(x,y,l,y);
// j=l*2;
j = l;
for(i=1;i<=j;i++)
{
utftData(c>>8);
utftData(c);
}
digitalWrite(TFT_CS,HIGH);
checkCAT();
}
void displayClear(unsigned int j)
{
unsigned int i,m;
digitalWrite(TFT_CS,LOW);
utftAddress(0,0,320,240);
for(i=0;i<320;i++)
for(m=0;m<240;m++)
{
utftData(j>>8);
utftData(j);
}
digitalWrite(TFT_CS,HIGH);
}
void utftVline(unsigned int x, unsigned int y, unsigned int l, unsigned int c)
{
unsigned int i,j;
digitalWrite(TFT_CS,LOW);
utftCmd(0x02c); //write_memory_start
//digitalWrite(RS,HIGH);
l=l+y;
utftAddress(x,y,x,l);
//j=l*2;
j = l;
for(i=1;i<=l;i++)
{
utftData(c>>8);
utftData(c);
}
digitalWrite(TFT_CS,HIGH);
checkCAT();
}
void utftRect(unsigned int x,unsigned int y,unsigned int w,unsigned int h,unsigned int c)
{
utftHline(x , y , w, c);
utftHline(x , y+h, w, c);
utftVline(x , y , h, c);
utftVline(x+w, y , h, c);
}
void utftFillrect(unsigned int x,unsigned int y,unsigned int w,unsigned int h,unsigned int c)
{
unsigned int i;
for(i=0;i<h;i++)
{
//utftHline(x , y , w, c);
utftHline(x , y+i, w, c);
}
}
void displayInit(void)
{
SPI.begin();
SPI.setClockDivider(SPI_CLOCK_DIV4); // 4 MHz (half speed)
SPI.setBitOrder(MSBFIRST);
SPI.setDataMode(SPI_MODE0);
gfxFont = &ubitx_font;
pinMode(TFT_CS,OUTPUT);
pinMode(TFT_RS,OUTPUT);
digitalWrite(TFT_CS,LOW); //CS
utftCmd(0xCB);
utftData(0x39);
utftData(0x2C);
utftData(0x00);
utftData(0x34);
utftData(0x02);
utftCmd(0xCF);
utftData(0x00);
utftData(0XC1);
utftData(0X30);
utftCmd(0xE8);
utftData(0x85);
utftData(0x00);
utftData(0x78);
utftCmd(0xEA);
utftData(0x00);
utftData(0x00);
utftCmd(0xED);
utftData(0x64);
utftData(0x03);
utftData(0X12);
utftData(0X81);
utftCmd(0xF7);
utftData(0x20);
utftCmd(0xC0); //Power control
utftData(0x23); //VRH[5:0]
utftCmd(0xC1); //Power control
utftData(0x10); //SAP[2:0];BT[3:0]
utftCmd(0xC5); //VCM control
utftData(0x3e); //Contrast
utftData(0x28);
utftCmd(0xC7); //VCM control2
utftData(0x86); //--
utftCmd(0x36); // Memory Access Control
utftData(0x28); // Make this horizontal display
utftCmd(0x3A);
utftData(0x55);
utftCmd(0xB1);
utftData(0x00);
utftData(0x18);
utftCmd(0xB6); // Display Function Control
utftData(0x08);
utftData(0x82);
utftData(0x27);
utftCmd(0x11); //Exit Sleep
delay(120);
utftCmd(0x29); //Display on
utftCmd(0x2c);
digitalWrite(TFT_CS,HIGH);
//now to init the touch screen controller
ts.begin();
ts.setRotation(1);
readTouchCalibration();
}
// Draw a character
/**************************************************************************/
/*!
@brief Draw a single character
@param x Bottom left corner x coordinate
@param y Bottom left corner y coordinate
@param c The 8-bit font-indexed character (likely ascii)
@param color 16-bit 5-6-5 Color to draw chraracter with
@param bg 16-bit 5-6-5 Color to fill background with (if same as color, no background)
@param size_x Font magnification level in X-axis, 1 is 'original' size
@param size_y Font magnification level in Y-axis, 1 is 'original' size
*/
/**************************************************************************/
#define FAST_TEXT 1
void displayChar(int16_t x, int16_t y, unsigned char c, uint16_t color, uint16_t bg) {
c -= (uint8_t)pgm_read_byte(&gfxFont->first);
GFXglyph *glyph = pgm_read_glyph_ptr(gfxFont, c);
uint8_t *bitmap = pgm_read_bitmap_ptr(gfxFont);
uint16_t bo = pgm_read_word(&glyph->bitmapOffset);
uint8_t w = pgm_read_byte(&glyph->width),
h = pgm_read_byte(&glyph->height);
int8_t xo = pgm_read_byte(&glyph->xOffset),
yo = pgm_read_byte(&glyph->yOffset);
uint8_t xx, yy, bits = 0, bit = 0;
int16_t xo16 = 0, yo16 = 0;
digitalWrite(TFT_CS,LOW);
#ifdef FAST_TEXT
uint16_t hpc = 0; // Horizontal foreground pixel count
for(yy=0; yy<h; yy++) {
for(xx=0; xx<w; xx++) {
if(bit == 0) {
bits = pgm_read_byte(&bitmap[bo++]);
bit = 0x80;
}
if(bits & bit) hpc++;
else {
if (hpc) {
utftHline(x+xo+xx-hpc, y+yo+yy, hpc, color);
hpc=0;
}
}
bit >>= 1;
}
// Draw pixels for this line as we are about to increment yy
if (hpc) {
utftHline(x+xo+xx-hpc, y+yo+yy, hpc, color);
hpc=0;
}
checkCAT();
}
#else
for(yy=0; yy<h; yy++) {
for(xx=0; xx<w; xx++) {
if(!(bit++ & 7)) {
bits = pgm_read_byte(&bitmap[bo++]);
}
if(bits & 0x80) {
utftPixel(x+xo+xx, y+yo+yy, color);
}
bits <<= 1;
}
checkCAT();
}
#endif
}
/*
void displayChar(int16_t x, int16_t y, unsigned char c, uint16_t color, uint16_t bg) {
// Character is assumed previously filtered by write() to eliminate
// newlines, returns, non-printable characters, etc. Calling
// drawChar() directly with 'bad' characters of font may cause mayhem!
c -= (uint8_t)pgm_read_byte(&gfxFont->first);
GFXglyph *glyph = pgm_read_glyph_ptr(gfxFont, c);
uint8_t *bitmap = pgm_read_bitmap_ptr(gfxFont);
uint16_t bo = pgm_read_word(&glyph->bitmapOffset);
uint8_t w = pgm_read_byte(&glyph->width),
h = pgm_read_byte(&glyph->height);
int8_t xo = pgm_read_byte(&glyph->xOffset),
yo = pgm_read_byte(&glyph->yOffset);
uint8_t xx, yy, bits = 0, bit = 0;
int16_t xo16 = 0, yo16 = 0;
digitalWrite(TFT_CS,LOW);
for(yy=0; yy<h; yy++) {
for(xx=0; xx<w; xx++) {
if(!(bit++ & 7)) {
bits = pgm_read_byte(&bitmap[bo++]);
}
if(bits & 0x80) {
utftPixel(x+xo+xx, y+yo+yy, color);
}
// else
// utftPixel(x+xo+xx, y+yo+yy, bg);
bits <<= 1;
}
checkCAT();
}
digitalWrite(TFT_CS,HIGH);
}
*/
int displayTextExtent(char *text) {
int ext = 0;
while(*text){
char c = *text++;
uint8_t first = pgm_read_byte(&gfxFont->first);
if((c >= first) && (c <= (uint8_t)pgm_read_byte(&gfxFont->last))) {
GFXglyph *glyph = pgm_read_glyph_ptr(gfxFont, c - first);
ext += (uint8_t)pgm_read_byte(&glyph->xAdvance);
}
}//end of the while loop of the characters to be printed
return ext;
}
void displayRawText(char *text, int x1, int y1, int color, int background){
while(*text){
char c = *text++;
uint8_t first = pgm_read_byte(&gfxFont->first);
if((c >= first) && (c <= (uint8_t)pgm_read_byte(&gfxFont->last))) {
GFXglyph *glyph = pgm_read_glyph_ptr(gfxFont, c - first);
uint8_t w = pgm_read_byte(&glyph->width),
h = pgm_read_byte(&glyph->height);
if((w > 0) && (h > 0)) { // Is there an associated bitmap?
int16_t xo = (int8_t)pgm_read_byte(&glyph->xOffset); // sic
displayChar(x1, y1+TEXT_LINE_HEIGHT, c, color, background);
checkCAT();
}
x1 += (uint8_t)pgm_read_byte(&glyph->xAdvance);
}
}//end of the while loop of the characters to be printed
}
// The generic routine to display one line on the LCD
void displayText(char *text, int x1, int y1, int w, int h, int color, int background, int border) {
utftFillrect(x1, y1, w ,h, background);
utftRect(x1, y1, w ,h, border);
x1 += (w - displayTextExtent(text))/2;
y1 += (h - TEXT_LINE_HEIGHT)/2;
while(*text){
char c = *text++;
uint8_t first = pgm_read_byte(&gfxFont->first);
if((c >= first) && (c <= (uint8_t)pgm_read_byte(&gfxFont->last))) {
GFXglyph *glyph = pgm_read_glyph_ptr(gfxFont, c - first);
uint8_t w = pgm_read_byte(&glyph->width),
h = pgm_read_byte(&glyph->height);
if((w > 0) && (h > 0)) { // Is there an associated bitmap?
int16_t xo = (int8_t)pgm_read_byte(&glyph->xOffset); // sic
displayChar(x1, y1+TEXT_LINE_HEIGHT, c, color, background);
checkCAT();
}
x1 += (uint8_t)pgm_read_byte(&glyph->xAdvance);
}
}//end of the while loop of the characters to be printed
}
void setupTouch(){
int x1, y1, x2, y2, x3, y3, x4, y4;
displayClear(ILI9341_BLACK);
displayText("Click on the cross", 20,100, 200, 50, ILI9341_WHITE, ILI9341_BLACK, ILI9341_BLACK);
// TOP-LEFT
utftHline(10,20,20,ILI9341_WHITE);
utftVline(20,10,20, ILI9341_WHITE);
while(!readTouch())
delay(100);
while(readTouch())
delay(100);
x1 = ts_point.x;
y1 = ts_point.y;
//rubout the previous one
utftHline(10,20,20,ILI9341_BLACK);
utftVline(20,10,20, ILI9341_BLACK);
delay(1000);
//TOP RIGHT
utftHline(290,20,20,ILI9341_WHITE);
utftVline(300,10,20, ILI9341_WHITE);
while(!readTouch())
delay(100);
while(readTouch())
delay(100);
x2 = ts_point.x;
y2 = ts_point.y;
utftHline(290,20,20,ILI9341_BLACK);
utftVline(300,10,20, ILI9341_BLACK);
delay(1000);
//BOTTOM LEFT
utftHline(10,220,20,ILI9341_WHITE);
utftVline(20,210,20, ILI9341_WHITE);
while(!readTouch())
delay(100);
x3 = ts_point.x;
y3 = ts_point.y;
while(readTouch())
delay(100);
utftHline(10,220,20,ILI9341_BLACK);
utftVline(20,210,20, ILI9341_BLACK);
delay(1000);
//BOTTOM RIGHT
utftHline(290,220,20,ILI9341_WHITE);
utftVline(300,210,20, ILI9341_WHITE);
while(!readTouch())
delay(100);
x4 = ts_point.x;
y4 = ts_point.y;
utftHline(290,220,20,ILI9341_BLACK);
utftVline(300,210,20, ILI9341_BLACK);
// we average two readings and divide them by half and store them as scaled integers 10 times their actual value
slope_x = ((x4 - x3) + (x2 - x1))/60; // divide by 300 will give each span it's slope, we add two of them so division reduces to 150 and then by 10 to scale it up : 15
slope_y = ((y3 - y1) + (y4 - y2))/44;
//x1, y1 is at 10 pixels
offset_x = x1 * 10 / slope_x - 10;
offset_y = y1 * 10 / slope_y - 10;
/* //for debugging
Serial.print(slope_x); Serial.print(' ');
Serial.print(slope_y); Serial.print(' ');
Serial.print(offset_x); Serial.print(' ');
Serial.println(offset_y); Serial.print(' ');
*/
writeTouchCalibration();
displayClear(ILI9341_BLACK);
}

452
ubitx_cat.ino Normal file
View File

@ -0,0 +1,452 @@
/**
* The CAT protocol is used by many radios to provide remote control to comptuers through
* the serial port.
*
* This is very much a work in progress. Parts of this code have been liberally
* borrowed from other GPLicensed works like hamlib.
*
* WARNING : This is an unstable version and it has worked with fldigi,
* it gives time out error with WSJTX 1.8.0
*/
static unsigned long rxBufferArriveTime = 0;
static byte rxBufferCheckCount = 0;
#define CAT_RECEIVE_TIMEOUT 500
static byte cat[5];
static byte insideCat = 0;
static byte useOpenRadioControl = 0;
//for broken protocol
#define CAT_RECEIVE_TIMEOUT 500
#define CAT_MODE_LSB 0x00
#define CAT_MODE_USB 0x01
#define CAT_MODE_CW 0x02
#define CAT_MODE_CWR 0x03
#define CAT_MODE_AM 0x04
#define CAT_MODE_FM 0x08
#define CAT_MODE_DIG 0x0A
#define CAT_MODE_PKT 0x0C
#define CAT_MODE_FMN 0x88
#define ACK 0
unsigned int skipTimeCount = 0;
byte setHighNibble(byte b,byte v) {
// Clear the high nibble
b &= 0x0f;
// Set the high nibble
return b | ((v & 0x0f) << 4);
}
byte setLowNibble(byte b,byte v) {
// Clear the low nibble
b &= 0xf0;
// Set the low nibble
return b | (v & 0x0f);
}
byte getHighNibble(byte b) {
return (b >> 4) & 0x0f;
}
byte getLowNibble(byte b) {
return b & 0x0f;
}
// Takes a number and produces the requested number of decimal digits, staring
// from the least significant digit.
//
void getDecimalDigits(unsigned long number,byte* result,int digits) {
for (int i = 0; i < digits; i++) {
// "Mask off" (in a decimal sense) the LSD and return it
result[i] = number % 10;
// "Shift right" (in a decimal sense)
number /= 10;
}
}
// Takes a frequency and writes it into the CAT command buffer in BCD form.
//
void writeFreq(unsigned long freq,byte* cmd) {
// Convert the frequency to a set of decimal digits. We are taking 9 digits
// so that we can get up to 999 MHz. But the protocol doesn't care about the
// LSD (1's place), so we ignore that digit.
byte digits[9];
getDecimalDigits(freq,digits,9);
// Start from the LSB and get each nibble
cmd[3] = setLowNibble(cmd[3],digits[1]);
cmd[3] = setHighNibble(cmd[3],digits[2]);
cmd[2] = setLowNibble(cmd[2],digits[3]);
cmd[2] = setHighNibble(cmd[2],digits[4]);
cmd[1] = setLowNibble(cmd[1],digits[5]);
cmd[1] = setHighNibble(cmd[1],digits[6]);
cmd[0] = setLowNibble(cmd[0],digits[7]);
cmd[0] = setHighNibble(cmd[0],digits[8]);
}
// This function takes a frquency that is encoded using 4 bytes of BCD
// representation and turns it into an long measured in Hz.
//
// [12][34][56][78] = 123.45678? Mhz
//
unsigned long readFreq(byte* cmd) {
// Pull off each of the digits
byte d7 = getHighNibble(cmd[0]);
byte d6 = getLowNibble(cmd[0]);
byte d5 = getHighNibble(cmd[1]);
byte d4 = getLowNibble(cmd[1]);
byte d3 = getHighNibble(cmd[2]);
byte d2 = getLowNibble(cmd[2]);
byte d1 = getHighNibble(cmd[3]);
byte d0 = getLowNibble(cmd[3]);
return
(unsigned long)d7 * 100000000L +
(unsigned long)d6 * 10000000L +
(unsigned long)d5 * 1000000L +
(unsigned long)d4 * 100000L +
(unsigned long)d3 * 10000L +
(unsigned long)d2 * 1000L +
(unsigned long)d1 * 100L +
(unsigned long)d0 * 10L;
}
//void ReadEEPRom_FT817(byte fromType)
void catReadEEPRom(void)
{
//for remove warnings
byte temp0 = cat[0];
byte temp1 = cat[1];
/*
itoa((int) cat[0], b, 16);
strcat(b, ":");
itoa((int) cat[1], c, 16);
strcat(b, c);
printLine2(b);
*/
cat[0] = 0;
cat[1] = 0;
//for remove warnings[1] = 0;
switch (temp1)
{
case 0x45 : //
if (temp0 == 0x03)
{
cat[0] = 0x00;
cat[1] = 0xD0;
}
break;
case 0x47 : //
if (temp0 == 0x03)
{
cat[0] = 0xDC;
cat[1] = 0xE0;
}
break;
case 0x55 :
//0 : VFO A/B 0 = VFO-A, 1 = VFO-B
//1 : MTQMB Select 0 = (Not MTQMB), 1 = MTQMB ("Memory Tune Quick Memory Bank")
//2 : QMB Select 0 = (Not QMB), 1 = QMB ("Quick Memory Bank")
//3 :
//4 : Home Select 0 = (Not HOME), 1 = HOME memory
//5 : Memory/MTUNE select 0 = Memory, 1 = MTUNE
//6 :
//7 : MEM/VFO Select 0 = Memory, 1 = VFO (A or B - see bit 0)
cat[0] = 0x80 + (vfoActive == VFO_B ? 1 : 0);
cat[1] = 0x00;
break;
case 0x57 : //
//0 : 1-0 AGC Mode 00 = Auto, 01 = Fast, 10 = Slow, 11 = Off
//2 DSP On/Off 0 = Off, 1 = On (Display format)
//4 PBT On/Off 0 = Off, 1 = On (Passband Tuning)
//5 NB On/Off 0 = Off, 1 = On (Noise Blanker)
//6 Lock On/Off 0 = Off, 1 = On (Dial Lock)
//7 FST (Fast Tuning) On/Off 0 = Off, 1 = On (Fast tuning)
cat[0] = 0xC0;
cat[1] = 0x40;
break;
case 0x59 : // band select VFO A Band Select 0000 = 160 M, 0001 = 75 M, 0010 = 40 M, 0011 = 30 M, 0100 = 20 M, 0101 = 17 M, 0110 = 15 M, 0111 = 12 M, 1000 = 10 M, 1001 = 6 M, 1010 = FM BCB, 1011 = Air, 1100 = 2 M, 1101 = UHF, 1110 = (Phantom)
//http://www.ka7oei.com/ft817_memmap.html
//CAT_BUFF[0] = 0xC2;
//CAT_BUFF[1] = 0x82;
break;
case 0x5C : //Beep Volume (0-100) (#13)
cat[0] = 0xB2;
cat[1] = 0x42;
break;
case 0x5E :
//3-0 : CW Pitch (300-1000 Hz) (#20) From 0 to E (HEX) with 0 = 300 Hz and each step representing 50 Hz
//5-4 : Lock Mode (#32) 00 = Dial, 01 = Freq, 10 = Panel
//7-6 : Op Filter (#38) 00 = Off, 01 = SSB, 10 = CW
//CAT_BUFF[0] = 0x08;
cat[0] = (sideTone - 300)/50;
cat[1] = 0x25;
break;
case 0x61 : //Sidetone (Volume) (#44)
cat[0] = sideTone % 50;
cat[1] = 0x08;
break;
case 0x5F : //
//4-0 CW Weight (1.:2.5-1:4.5) (#22) From 0 to 14 (HEX) with 0 = 1:2.5, incrementing in 0.1 weight steps
//5 420 ARS (#2) 0 = Off, 1 = On
//6 144 ARS (#1) 0 = Off, 1 = On
//7 Sql/RF-G (#45) 0 = Off, 1 = On
cat[0] = 0x32;
cat[1] = 0x08;
break;
case 0x60 : //CW Delay (10-2500 ms) (#17) From 1 to 250 (decimal) with each step representing 10 ms
cat[0] = cwDelayTime;
cat[1] = 0x32;
break;
case 0x62 : //
//5-0 CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
//7-6 Batt-Chg (6/8/10 Hours (#11) 00 = 6 Hours, 01 = 8 Hours, 10 = 10 Hours
//CAT_BUFF[0] = 0x08;
cat[0] = 1200 / cwSpeed - 4;
cat[1] = 0xB2;
break;
case 0x63 : //
//6-0 VOX Gain (#51) Contains 1-100 (decimal) as displayed
//7 Disable AM/FM Dial (#4) 0 = Enable, 1 = Disable
cat[0] = 0xB2;
cat[1] = 0xA5;
break;
case 0x64 : //
break;
case 0x67 : //6-0 SSB Mic (#46) Contains 0-100 (decimal) as displayed
cat[0] = 0xB2;
cat[1] = 0xB2;
break; case 0x69 : //FM Mic (#29) Contains 0-100 (decimal) as displayed
case 0x78 :
if (isUSB)
cat[0] = CAT_MODE_USB;
else
cat[0] = CAT_MODE_LSB;
if (cat[0] != 0) cat[0] = 1 << 5;
break;
case 0x79 : //
//1-0 TX Power (All bands) 00 = High, 01 = L3, 10 = L2, 11 = L1
//3 PRI On/Off 0 = Off, 1 = On
//DW On/Off 0 = Off, 1 = On
//SCN (Scan) Mode 00 = No scan, 10 = Scan up, 11 = Scan down
//ART On/Off 0 = Off, 1 = On
cat[0] = 0x00;
cat[1] = 0x00;
break;
case 0x7A : //SPLIT
//7A 0 HF Antenna Select 0 = Front, 1 = Rear
//7A 1 6 M Antenna Select 0 = Front, 1 = Rear
//7A 2 FM BCB Antenna Select 0 = Front, 1 = Rear
//7A 3 Air Antenna Select 0 = Front, 1 = Rear
//7A 4 2 M Antenna Select 0 = Front, 1 = Rear
//7A 5 UHF Antenna Select 0 = Front, 1 = Rear
//7A 6 ? ?
//7A 7 SPL On/Off 0 = Off, 1 = On
cat[0] = (splitOn ? 0xFF : 0x7F);
break;
case 0xB3 : //
cat[0] = 0x00;
cat[1] = 0x4D;
break;
}
// sent the data
Serial.write(cat, 2);
}
void processCATCommand2(byte* cmd) {
byte response[5];
unsigned long f;
switch(cmd[4]){
/* case 0x00:
response[0]=0;
Serial.write(response, 1);
break;
*/
case 0x01:
//set frequency
f = readFreq(cmd);
setFrequency(f);
updateDisplay();
response[0]=0;
Serial.write(response, 1);
//sprintf(b, "set:%ld", f);
//printLine2(b);
break;
case 0x02:
//split on
splitOn = 1;
break;
case 0x82:
//split off
splitOn = 0;
break;
case 0x03:
writeFreq(frequency,response); // Put the frequency into the buffer
if (isUSB)
response[4] = 0x01; //USB
else
response[4] = 0x00; //LSB
Serial.write(response,5);
//printLine2("cat:getfreq");
break;
case 0x07: // set mode
if (cmd[0] == 0x00 || cmd[0] == 0x03)
isUSB = 0;
else
isUSB = 1;
response[0] = 0x00;
Serial.write(response, 1);
setFrequency(frequency);
//printLine2("cat: mode changed");
//updateDisplay();
break;
case 0x08: // PTT On
if (!inTx) {
response[0] = 0;
txCAT = true;
startTx(TX_SSB);
updateDisplay();
} else {
response[0] = 0xf0;
}
Serial.write(response,1);
updateDisplay();
break;
case 0x88 : //PTT OFF
if (inTx) {
stopTx();
txCAT = false;
}
response[0] = 0;
Serial.write(response,1);
updateDisplay();
break;
case 0x81:
//toggle the VFOs
response[0] = 0;
if (vfoActive == VFO_A)
switchVFO(VFO_B);
else
switchVFO(VFO_A);
//menuVfoToggle(1); // '1' forces it to change the VFO
Serial.write(response,1);
updateDisplay();
break;
case 0xBB: //Read FT-817 EEPROM Data (for comfirtable)
catReadEEPRom();
break;
case 0xe7 :
// get receiver status, we have hardcoded this as
//as we dont' support ctcss, etc.
response[0] = 0x09;
Serial.write(response,1);
break;
case 0xf7:
{
boolean isHighSWR = false;
boolean isSplitOn = false;
/*
Inverted -> *ptt = ((p->tx_status & 0x80) == 0); <-- souce code in ft817.c (hamlib)
*/
response[0] = ((inTx ? 0 : 1) << 7) +
((isHighSWR ? 1 : 0) << 6) + //hi swr off / on
((isSplitOn ? 1 : 0) << 5) + //Split on / off
(0 << 4) + //dummy data
0x08; //P0 meter data
Serial.write(response, 1);
}
break;
default:
//somehow, get this to print the four bytes
ultoa(*((unsigned long *)cmd), c, 16);
/*itoa(cmd[4], b, 16);
strcat(b, ">");
strcat(b, c);
printLine2(b);*/
response[0] = 0x00;
Serial.write(response[0]);
}
insideCat = false;
}
int catCount = 0;
void checkCAT(){
byte i;
//Check Serial Port Buffer
if (Serial.available() == 0) { //Set Buffer Clear status
rxBufferCheckCount = 0;
return;
}
else if (Serial.available() < 5) { //First Arrived
if (rxBufferCheckCount == 0){
rxBufferCheckCount = Serial.available();
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
}
else if (rxBufferArriveTime < millis()){ //Clear Buffer
for (i = 0; i < Serial.available(); i++)
rxBufferCheckCount = Serial.read();
rxBufferCheckCount = 0;
}
else if (rxBufferCheckCount < Serial.available()){ // Increase buffer count, slow arrive
rxBufferCheckCount = Serial.available();
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
}
return;
}
//Arived CAT DATA
for (i = 0; i < 5; i++)
cat[i] = Serial.read();
//this code is not re-entrant.
if (insideCat == 1)
return;
insideCat = 1;
/**
* This routine is enabled to debug the cat protocol
**/
catCount++;
/*
if (cat[4] != 0xf7 && cat[4] != 0xbb && cat[4] != 0x03){
sprintf(b, "%d %02x %02x%02x%02x%02x", catCount, cat[4],cat[0], cat[1], cat[2], cat[3]);
printLine2(b);
}
*/
if (!doingCAT){
doingCAT = 1;
displayText("CAT on", 100,120,100,40, ILI9341_ORANGE, ILI9341_BLACK, ILI9341_WHITE);
}
processCATCommand2(cat);
insideCat = 0;
}

97
ubitx_factory_alignment.ino Normal file
View File

@ -0,0 +1,97 @@
/**
* This procedure is only for those who have a signal generator/transceiver tuned to exactly 7.150 and a dummy load
*/
void btnWaitForClick(){
while(!btnDown())
active_delay(50);
while(btnDown())
active_delay(50);
active_delay(50);
}
/**
* Take a deep breath, math(ematics) ahead
* The 25 mhz oscillator is multiplied by 35 to run the vco at 875 mhz
* This is divided by a number to generate different frequencies.
* If we divide it by 875, we will get 1 mhz signal
* So, if the vco is shifted up by 875 hz, the generated frequency of 1 mhz is shifted by 1 hz (875/875)
* At 12 Mhz, the carrier will needed to be shifted down by 12 hz for every 875 hz of shift up of the vco
*
*/
/*
void factory_alignment(){
calibrateClock();
if (calibration == 0){
printLine2("Setup Aborted");
return;
}
//move it away to 7.160 for an LSB signal
setFrequency(7170000l);
updateDisplay();
printLine2("#2 BFO");
active_delay(1000);
usbCarrier = 11053000l;
menuSetupCarrier(1);
if (usbCarrier == 11994999l){
printLine2("Setup Aborted");
return;
}
printLine2("#3:Test 3.5MHz");
isUSB = false;
setFrequency(3500000l);
updateDisplay();
while (!btnDown()){
checkPTT();
active_delay(100);
}
btnWaitForClick();
printLine2("#4:Test 7MHz");
setFrequency(7150000l);
updateDisplay();
while (!btnDown()){
checkPTT();
active_delay(100);
}
btnWaitForClick();
printLine2("#5:Test 14MHz");
isUSB = true;
setFrequency(14000000l);
updateDisplay();
while (!btnDown()){
checkPTT();
active_delay(100);
}
btnWaitForClick();
printLine2("#6:Test 28MHz");
setFrequency(28000000l);
updateDisplay();
while (!btnDown()){
checkPTT();
active_delay(100);
}
printLine2("Alignment done");
active_delay(1000);
isUSB = false;
setFrequency(7150000l);
updateDisplay();
}
*/

355
ubitx_font2.h Normal file
View File

@ -0,0 +1,355 @@
const uint8_t ubitxBitmaps[] PROGMEM = {
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC,
0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80,
0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0,
0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F,
0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC,
0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80,
0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0,
0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F,
0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC,
0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80,
0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0,
0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F,
0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC,
0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80,
0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0,
0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F,
0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC,
0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80,
0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0,
0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F,
0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC,
0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80,
0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0,
0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F,
0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0,
0xFF, 0xFF, 0xFF, 0xFF, 0x21, 0xFF, 0xE0, 0xF3, 0xF9, 0xFC, 0xFE, 0x7E,
0x3B, 0x1D, 0x84, 0x0E, 0x70, 0x73, 0x83, 0x9C, 0x18, 0xC7, 0xFF, 0xBF,
0xFD, 0xFF, 0xE3, 0x9C, 0x18, 0xC0, 0xC6, 0x0E, 0x7D, 0xFF, 0xEF, 0xFF,
0x18, 0xC0, 0xC6, 0x0E, 0x70, 0x73, 0x83, 0x9C, 0x00, 0x04, 0x01, 0xF8,
0x7F, 0xCF, 0xDE, 0xE4, 0xEE, 0x4E, 0xE4, 0x0F, 0x40, 0x7E, 0x03, 0xFC,
0x0F, 0xE0, 0x5E, 0x04, 0xFE, 0x4F, 0xE4, 0xFF, 0x4E, 0x7F, 0xE3, 0xFC,
0x04, 0x00, 0x40, 0x04, 0x00, 0x3C, 0x06, 0x07, 0xE0, 0x60, 0xFF, 0x0C,
0x0C, 0x30, 0x80, 0xC3, 0x18, 0x0C, 0x31, 0x00, 0xFF, 0x30, 0x07, 0xE6,
0x00, 0x3C, 0x60, 0x00, 0x0C, 0x7C, 0x00, 0xCF, 0xE0, 0x19, 0xC6, 0x01,
0x98, 0x70, 0x31, 0x87, 0x03, 0x1C, 0x60, 0x60, 0xFE, 0x04, 0x07, 0xC0,
0x0F, 0x80, 0x1F, 0xC0, 0x3D, 0xE0, 0x38, 0xE0, 0x3C, 0xE0, 0x1D, 0xC0,
0x1F, 0xC0, 0x0F, 0x00, 0x3F, 0x8C, 0x7B, 0xDC, 0x71, 0xDC, 0xF1, 0xFC,
0xF0, 0xF8, 0xF0, 0x78, 0x79, 0xFC, 0x7F, 0xFC, 0x3F, 0x9E, 0x00, 0x00,
0xFF, 0xFF, 0xE6, 0x60, 0x0C, 0x71, 0x8E, 0x31, 0xC7, 0x38, 0xE3, 0x8E,
0x38, 0xE3, 0x8E, 0x38, 0x71, 0xC7, 0x0E, 0x38, 0x70, 0xC0, 0xC3, 0x86,
0x1C, 0x70, 0xE3, 0x8E, 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xCE, 0x38, 0xE7,
0x1C, 0x63, 0x8C, 0x00, 0x10, 0x10, 0x10, 0xFE, 0x7C, 0x38, 0x6C, 0x44,
0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0x60,
0x06, 0x00, 0x60, 0x06, 0x00, 0xFF, 0xF2, 0xFE, 0xFF, 0xFF, 0xC0, 0xFF,
0xF0, 0x04, 0x08, 0x30, 0x60, 0x83, 0x06, 0x08, 0x10, 0x60, 0xC1, 0x06,
0x0C, 0x10, 0x20, 0xC0, 0x3F, 0x8F, 0xF9, 0xEF, 0x78, 0xFE, 0x0F, 0xC1,
0xF8, 0x3F, 0x07, 0xE0, 0xFC, 0x1F, 0x83, 0xF0, 0x7E, 0x0F, 0xE3, 0xDE,
0xF3, 0xFE, 0x3F, 0x80, 0x80, 0x06, 0x1C, 0x7F, 0xFF, 0xE1, 0xC3, 0x87,
0x0E, 0x1C, 0x38, 0x70, 0xE1, 0xC3, 0x87, 0x0E, 0x3F, 0x8F, 0xFB, 0xEF,
0xF8, 0x7E, 0x0F, 0xC1, 0xC0, 0x38, 0x0F, 0x03, 0xC0, 0xF0, 0x7C, 0x1F,
0x07, 0x80, 0xE0, 0x3F, 0xFF, 0xFF, 0xFF, 0xE0, 0x3F, 0x8F, 0xFB, 0xCF,
0xF0, 0xFE, 0x1E, 0x03, 0xC0, 0x70, 0x7C, 0x0F, 0xC0, 0xFC, 0x03, 0x80,
0x7E, 0x0F, 0xC1, 0xFC, 0xFB, 0xFE, 0x3F, 0x80, 0x80, 0x07, 0xC0, 0x7C,
0x0F, 0xC0, 0xFC, 0x1F, 0xC3, 0xBC, 0x33, 0xC7, 0x3C, 0x63, 0xCE, 0x3C,
0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0x3C, 0x03, 0xC0, 0x3C, 0x03, 0xC0, 0x3F,
0xEF, 0xFD, 0xFF, 0xB8, 0x06, 0x00, 0xC0, 0x1F, 0xE7, 0xFE, 0xF1, 0xE0,
0x1C, 0x03, 0x80, 0x70, 0x0F, 0xC1, 0xFC, 0xFB, 0xFE, 0x3F, 0x80, 0x80,
0x1F, 0x87, 0xF9, 0xE7, 0xB8, 0x7E, 0x01, 0xC0, 0x3B, 0xE7, 0xFE, 0xFB,
0xFE, 0x1F, 0x83, 0xF0, 0x7E, 0x0F, 0xE1, 0xDE, 0xFB, 0xFE, 0x3F, 0x80,
0x80, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0x0E, 0x01, 0xC0, 0x3C, 0x03, 0x80,
0x70, 0x0F, 0x00, 0xE0, 0x0E, 0x01, 0xE0, 0x1C, 0x01, 0xC0, 0x1C, 0x03,
0xC0, 0x3C, 0x00, 0x3F, 0x87, 0xFC, 0xF9, 0xEE, 0x0E, 0xE0, 0xEE, 0x0E,
0x71, 0xC3, 0xF8, 0x7F, 0xCF, 0x1E, 0xE0, 0xEE, 0x0F, 0xE0, 0xFE, 0x0E,
0xF1, 0xE7, 0xFC, 0x3F, 0x80, 0x40, 0x3F, 0x0F, 0xFB, 0xEF, 0x70, 0xFE,
0x0F, 0xC1, 0xF8, 0x3F, 0x0F, 0xF3, 0xEF, 0xFC, 0xFB, 0x80, 0x70, 0x0F,
0xC3, 0xFE, 0xF3, 0xFE, 0x3F, 0x80, 0x80, 0xFF, 0x80, 0x00, 0xFF, 0xF0,
0xFF, 0x80, 0x00, 0xFF, 0xF2, 0xDE, 0x00, 0x70, 0x1F, 0x0F, 0xE7, 0xF0,
0xF8, 0x0E, 0x00, 0xFC, 0x03, 0xF8, 0x0F, 0xE0, 0x1F, 0x00, 0x30, 0xFF,
0xFF, 0xFF, 0xFF, 0xF0, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
0xF0, 0xC0, 0x0F, 0x80, 0x7F, 0x00, 0xFC, 0x03, 0xF0, 0x07, 0x03, 0xF1,
0xFC, 0xFE, 0x0F, 0x80, 0xC0, 0x00, 0x1F, 0x0F, 0xF3, 0xFF, 0x78, 0xFE,
0x0F, 0xC1, 0xC0, 0x38, 0x0F, 0x03, 0xE0, 0xF8, 0x3C, 0x07, 0x00, 0xE0,
0x00, 0x03, 0x80, 0x70, 0x0E, 0x01, 0xC0, 0x00, 0xFC, 0x00, 0x0F, 0xFE,
0x00, 0xF0, 0x3C, 0x07, 0x00, 0x38, 0x38, 0x00, 0x30, 0xC0, 0x00, 0xE6,
0x0F, 0xF1, 0x98, 0x73, 0xC7, 0xC3, 0x87, 0x0F, 0x0C, 0x1C, 0x3C, 0x30,
0x61, 0xF1, 0xC1, 0x86, 0xC7, 0x0E, 0x1B, 0x1C, 0x38, 0xEC, 0x3B, 0xEF,
0x38, 0xFD, 0xF8, 0x70, 0xC1, 0x80, 0xE0, 0x00, 0x01, 0xC0, 0x10, 0x03,
0xFF, 0xC0, 0x03, 0xFF, 0x00, 0x03, 0xC0, 0x07, 0xC0, 0x07, 0xE0, 0x07,
0xE0, 0x0F, 0xE0, 0x0E, 0xF0, 0x0E, 0xF0, 0x1E, 0x70, 0x1C, 0x78, 0x1C,
0x78, 0x3C, 0x38, 0x3F, 0xFC, 0x3F, 0xFC, 0x7F, 0xFC, 0x70, 0x1E, 0xF0,
0x1E, 0xF0, 0x0E, 0xE0, 0x0F, 0xFF, 0x03, 0xFF, 0xCF, 0xFF, 0xBC, 0x7E,
0xF0, 0x3B, 0xC0, 0xEF, 0x03, 0xBF, 0xFE, 0xFF, 0xE3, 0xFF, 0xCF, 0x0F,
0xBC, 0x0F, 0xF0, 0x1F, 0xC0, 0xFF, 0x03, 0xFF, 0xFE, 0xFF, 0xFB, 0xFF,
0x80, 0x03, 0xC0, 0x1F, 0xF0, 0xFF, 0xF1, 0xF1, 0xE7, 0x81, 0xEF, 0x01,
0xFC, 0x00, 0x78, 0x00, 0xF0, 0x01, 0xE0, 0x03, 0xC0, 0x07, 0x80, 0x0F,
0x00, 0xEF, 0x01, 0xDE, 0x07, 0x9F, 0xFE, 0x1F, 0xFC, 0x1F, 0xE0, 0x04,
0x00, 0xFE, 0x03, 0xFF, 0x8F, 0xFF, 0x38, 0x7E, 0xE0, 0x7B, 0x80, 0xFE,
0x03, 0xF8, 0x07, 0xE0, 0x1F, 0x80, 0x7E, 0x01, 0xF8, 0x07, 0xE0, 0x3F,
0x80, 0xFE, 0x07, 0xBF, 0xFE, 0xFF, 0xF3, 0xFF, 0x00, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1F, 0xFE, 0xFF, 0xF7,
0xFF, 0xBC, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1F, 0xFF, 0xFF,
0xFF, 0xFF, 0xC0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0xE0, 0x0E, 0x00,
0xE0, 0x0F, 0xFE, 0xFF, 0xEF, 0xFE, 0xE0, 0x0E, 0x00, 0xE0, 0x0E, 0x00,
0xE0, 0x0E, 0x00, 0xE0, 0x0E, 0x00, 0x03, 0xE0, 0x0F, 0xF8, 0x1F, 0xFC,
0x3E, 0x3E, 0x78, 0x0F, 0x70, 0x0F, 0xF0, 0x00, 0xF0, 0x00, 0xF0, 0x00,
0xF0, 0x7F, 0xF0, 0x7F, 0xF0, 0x7F, 0xF0, 0x07, 0x78, 0x0F, 0x7C, 0x1F,
0x3F, 0xFF, 0x1F, 0xFB, 0x0F, 0xF3, 0xE0, 0x3F, 0x80, 0xFE, 0x03, 0xF8,
0x0F, 0xE0, 0x3F, 0x80, 0xFE, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE,
0x03, 0xF8, 0x0F, 0xE0, 0x3F, 0x80, 0xFE, 0x03, 0xF8, 0x0F, 0xE0, 0x3F,
0x80, 0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0x01, 0xE0, 0x3C,
0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x07,
0x80, 0xFE, 0x1F, 0xC3, 0xF8, 0x7F, 0xFE, 0xFF, 0xCF, 0xF0, 0x00, 0x00,
0xE0, 0x3D, 0xC0, 0xFB, 0x83, 0xE7, 0x07, 0x8E, 0x1E, 0x1C, 0x78, 0x39,
0xE0, 0x77, 0x80, 0xFF, 0x01, 0xFF, 0x03, 0xFE, 0x07, 0x9E, 0x0E, 0x1E,
0x1C, 0x1E, 0x38, 0x3C, 0x70, 0x3C, 0xE0, 0x3D, 0xC0, 0x3C, 0xF0, 0x0F,
0x00, 0xF0, 0x0F, 0x00, 0xF0, 0x0F, 0x00, 0xF0, 0x0F, 0x00, 0xF0, 0x0F,
0x00, 0xF0, 0x0F, 0x00, 0xF0, 0x0F, 0x00, 0xF0, 0x0F, 0xFF, 0xFF, 0xFF,
0xFF, 0xF8, 0x1F, 0xFC, 0x0F, 0xFE, 0x07, 0xFF, 0x83, 0xFF, 0xC3, 0xFF,
0xE1, 0xFF, 0xB0, 0xFF, 0xDC, 0x6F, 0xEE, 0x77, 0xF7, 0x3B, 0xF9, 0x9D,
0xFC, 0xCC, 0xFE, 0x76, 0x7F, 0x3F, 0x3F, 0x8F, 0x9F, 0xC7, 0xCF, 0xE3,
0xC7, 0xF1, 0xE3, 0xC0, 0xE0, 0x3F, 0xC0, 0xFF, 0x03, 0xFE, 0x0F, 0xFC,
0x3F, 0xF0, 0xFE, 0xE3, 0xFB, 0x8F, 0xE7, 0x3F, 0x9E, 0xFE, 0x3B, 0xF8,
0xFF, 0xE1, 0xFF, 0x83, 0xFE, 0x0F, 0xF8, 0x1F, 0xE0, 0x7F, 0x80, 0xF0,
0x03, 0xE0, 0x07, 0xFC, 0x07, 0xFF, 0x07, 0xCF, 0xC7, 0x81, 0xF3, 0xC0,
0x7B, 0xC0, 0x1D, 0xE0, 0x0F, 0xF0, 0x07, 0xF8, 0x03, 0xFC, 0x01, 0xFE,
0x00, 0xFF, 0x00, 0x73, 0xC0, 0x79, 0xF0, 0x7C, 0x7F, 0xFC, 0x1F, 0xFC,
0x07, 0xFC, 0x00, 0x20, 0x00, 0xFF, 0x07, 0xFF, 0x3F, 0xFD, 0xC3, 0xFE,
0x07, 0xF0, 0x1F, 0x80, 0xFC, 0x0F, 0xE0, 0xFF, 0xFF, 0xBF, 0xF9, 0xFF,
0x0E, 0x00, 0x70, 0x03, 0x80, 0x1C, 0x00, 0xE0, 0x07, 0x00, 0x00, 0x03,
0xE0, 0x07, 0xFC, 0x07, 0xFF, 0x07, 0xCF, 0xC7, 0x80, 0xF3, 0xC0, 0x7B,
0xC0, 0x1F, 0xE0, 0x0F, 0xF0, 0x07, 0xF8, 0x03, 0xFC, 0x01, 0xFE, 0x04,
0xFF, 0x07, 0x73, 0xC3, 0xF9, 0xF0, 0xFC, 0x7F, 0xFC, 0x1F, 0xFF, 0x07,
0xFF, 0xC0, 0x20, 0xC0, 0xFF, 0x83, 0xFF, 0xCF, 0xFF, 0xBC, 0x3F, 0xF0,
0x3F, 0xC0, 0xFF, 0x03, 0xFC, 0x0F, 0xFF, 0xFB, 0xFF, 0x8F, 0xFF, 0xBC,
0x1E, 0xF0, 0x3B, 0xC0, 0xEF, 0x03, 0xBC, 0x0E, 0xF0, 0x3F, 0xC0, 0xF0,
0x0F, 0x80, 0xFF, 0xC7, 0xFF, 0xBE, 0x1E, 0xF0, 0x3B, 0xC0, 0xFF, 0x00,
0x3F, 0x80, 0x7F, 0xE0, 0xFF, 0xE0, 0x3F, 0xC0, 0x0F, 0x00, 0x1F, 0x80,
0x7F, 0x03, 0xFF, 0x1F, 0x7F, 0xF8, 0xFF, 0xC0, 0x00, 0x00, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xE0, 0x03, 0x80, 0x0E, 0x00, 0x38, 0x00, 0xE0,
0x03, 0x80, 0x0E, 0x00, 0x38, 0x00, 0xE0, 0x03, 0x80, 0x0E, 0x00, 0x38,
0x00, 0xE0, 0x03, 0x80, 0x0E, 0x00, 0xE0, 0x3F, 0x80, 0xFE, 0x03, 0xF8,
0x0F, 0xE0, 0x3F, 0x80, 0xFE, 0x03, 0xF8, 0x0F, 0xE0, 0x3F, 0x80, 0xFE,
0x03, 0xF8, 0x0F, 0xE0, 0x3F, 0xC0, 0xFF, 0x07, 0x9F, 0xFE, 0x7F, 0xF0,
0x7F, 0x80, 0x20, 0x00, 0xE0, 0x1F, 0xC0, 0x3B, 0xC0, 0xF3, 0x81, 0xE7,
0x03, 0x8F, 0x0F, 0x0E, 0x1C, 0x1C, 0x38, 0x3C, 0x70, 0x39, 0xC0, 0x73,
0x80, 0xE7, 0x00, 0xFC, 0x01, 0xF8, 0x03, 0xF0, 0x03, 0xC0, 0x07, 0x80,
0x0F, 0x00, 0xF0, 0x38, 0x1D, 0xC1, 0xE0, 0xF7, 0x87, 0xC3, 0xDE, 0x1F,
0x0F, 0x78, 0x7C, 0x38, 0xE3, 0xB0, 0xE3, 0x8E, 0xC7, 0x8F, 0x3B, 0x9C,
0x1C, 0xEE, 0x70, 0x73, 0x39, 0xC1, 0xDC, 0x67, 0x07, 0x71, 0xB8, 0x0F,
0xC7, 0xE0, 0x3E, 0x1F, 0x80, 0xF8, 0x3E, 0x01, 0xE0, 0xF0, 0x07, 0x83,
0xC0, 0x1E, 0x0F, 0x00, 0xF0, 0x3D, 0xF0, 0x79, 0xE1, 0xE1, 0xE3, 0xC3,
0xCF, 0x03, 0xFC, 0x07, 0xF8, 0x07, 0xE0, 0x07, 0x80, 0x0F, 0x00, 0x3F,
0x00, 0x7F, 0x01, 0xFE, 0x07, 0x9E, 0x0F, 0x3C, 0x3C, 0x3C, 0xF8, 0x3D,
0xE0, 0x78, 0xF0, 0x1F, 0xE0, 0x79, 0xE0, 0xF3, 0xC3, 0xC3, 0xC7, 0x87,
0x9E, 0x07, 0x3C, 0x0F, 0x70, 0x0F, 0xE0, 0x1F, 0x80, 0x1F, 0x00, 0x3C,
0x00, 0x78, 0x00, 0xF0, 0x01, 0xE0, 0x03, 0xC0, 0x07, 0x80, 0x0F, 0x00,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0x0F, 0x00, 0xF0, 0x0F, 0x80,
0x78, 0x07, 0x80, 0x78, 0x07, 0x80, 0x7C, 0x03, 0xC0, 0x3C, 0x03, 0xC0,
0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0xFF, 0xFF, 0xCE, 0x73, 0x9C, 0xE7,
0x39, 0xCE, 0x73, 0x9C, 0xE7, 0x39, 0xCF, 0xFF, 0xE0, 0xC1, 0x81, 0x02,
0x06, 0x04, 0x08, 0x18, 0x30, 0x20, 0x60, 0xC0, 0x81, 0x83, 0x02, 0x06,
0xFF, 0xFF, 0xC7, 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7,
0x1C, 0x71, 0xC7, 0xFF, 0xFF, 0xC0, 0x0F, 0x00, 0xF0, 0x0F, 0x01, 0xF8,
0x1B, 0x83, 0x9C, 0x39, 0xC3, 0x0C, 0x70, 0xE7, 0x0E, 0xE0, 0x70, 0xFF,
0xFF, 0xFF, 0xFC, 0x71, 0x86, 0x3F, 0x87, 0xFC, 0xFF, 0xEE, 0x1E, 0x01,
0xE0, 0xFE, 0x7F, 0xEF, 0x8E, 0xE1, 0xEE, 0x1E, 0xF3, 0xEF, 0xFE, 0x7E,
0xE1, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x7B, 0xE3,
0xFF, 0x9F, 0xFE, 0xF8, 0xF7, 0x83, 0xFC, 0x1F, 0xE0, 0xFF, 0x07, 0xF8,
0x3F, 0xC1, 0xDF, 0x9E, 0xFF, 0xE7, 0xFE, 0x00, 0x40, 0x1F, 0x83, 0xFC,
0x7F, 0xEF, 0x0E, 0xE0, 0xEE, 0x00, 0xE0, 0x0E, 0x00, 0xE0, 0x0F, 0x0E,
0x79, 0xE7, 0xFC, 0x3F, 0x80, 0x00, 0x00, 0x70, 0x07, 0x00, 0x70, 0x07,
0x00, 0x71, 0xE7, 0x3F, 0xF7, 0xFF, 0xF0, 0xFE, 0x0F, 0xE0, 0x7E, 0x07,
0xE0, 0x7E, 0x0F, 0xF0, 0xF7, 0x9F, 0x7F, 0xF3, 0xF7, 0x00, 0x00, 0x1F,
0x07, 0xFC, 0x7B, 0xEE, 0x0E, 0xE0, 0xEF, 0xFE, 0xFF, 0xFF, 0xFF, 0xE0,
0x0E, 0x0E, 0xF1, 0xE7, 0xFC, 0x3F, 0x80, 0x40, 0x00, 0x1E, 0x3E, 0x3C,
0x3C, 0xFF, 0xFF, 0xFF, 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, 0x3C,
0x3C, 0x3C, 0x1E, 0x73, 0xF7, 0x7F, 0xFF, 0x0F, 0xF0, 0xFE, 0x07, 0xE0,
0x7E, 0x07, 0xE0, 0x7F, 0x0F, 0x79, 0xF7, 0xFF, 0x3F, 0x70, 0x07, 0x00,
0x7F, 0x0F, 0x7F, 0xE3, 0xFC, 0xE0, 0x1C, 0x03, 0x80, 0x70, 0x0E, 0x01,
0xDF, 0x3F, 0xF7, 0xFF, 0xF1, 0xFC, 0x1F, 0x83, 0xF0, 0x7E, 0x0F, 0xC1,
0xF8, 0x3F, 0x07, 0xE0, 0xFC, 0x1C, 0xFF, 0xF1, 0xFF, 0xFF, 0xFF, 0xFF,
0xFC, 0x39, 0xCE, 0x70, 0x1C, 0xE7, 0x39, 0xCE, 0x73, 0x9C, 0xE7, 0x39,
0xCE, 0x7F, 0xFF, 0xC0, 0xF0, 0x0F, 0x00, 0xF0, 0x0F, 0x00, 0xF0, 0x0F,
0x0E, 0xF1, 0xEF, 0x3C, 0xF7, 0x8F, 0xF0, 0xFF, 0x0F, 0xF0, 0xFF, 0x8F,
0x3C, 0xF3, 0xCF, 0x1E, 0xF1, 0xEF, 0x0F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFC, 0xF7, 0xCF, 0x9F, 0xFF, 0xFB, 0xFF, 0xFF, 0xF8, 0x78, 0xFF,
0x0E, 0x1F, 0xE1, 0xC3, 0xFC, 0x38, 0x7F, 0x87, 0x0F, 0xF0, 0xE1, 0xFE,
0x1C, 0x3F, 0xC3, 0x87, 0xF8, 0x70, 0xFF, 0x0E, 0x1E, 0xEF, 0x9F, 0xFB,
0xFF, 0xF8, 0xFE, 0x0F, 0xC1, 0xF8, 0x3F, 0x07, 0xE0, 0xFC, 0x1F, 0x83,
0xF0, 0x7E, 0x0E, 0x1F, 0x81, 0xFF, 0x1F, 0xFD, 0xE1, 0xEF, 0x07, 0x70,
0x3F, 0x81, 0xFC, 0x0F, 0xE0, 0x7F, 0x83, 0x9E, 0x3C, 0xFF, 0xC3, 0xFC,
0x01, 0x00, 0xF7, 0xC7, 0xFF, 0x3F, 0xFD, 0xF1, 0xEF, 0x07, 0xF8, 0x3F,
0xC1, 0xFE, 0x0F, 0xF0, 0x7F, 0x83, 0xBE, 0x3D, 0xFF, 0xCF, 0x7C, 0x78,
0x83, 0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x00, 0x1E, 0x77, 0xF7, 0x7F,
0xFF, 0x0F, 0xE0, 0xFE, 0x07, 0xE0, 0x7E, 0x07, 0xE0, 0xFF, 0x0F, 0xF9,
0xF7, 0xFF, 0x3F, 0x70, 0x47, 0x00, 0x70, 0x07, 0x00, 0x70, 0x07, 0xEF,
0xFF, 0xFF, 0x8E, 0x1C, 0x38, 0x70, 0xE1, 0xC3, 0x87, 0x0E, 0x00, 0x3F,
0x8F, 0xFB, 0xEF, 0xF8, 0x7F, 0x01, 0xFE, 0x1F, 0xF0, 0xFF, 0x01, 0xFC,
0x1F, 0xC3, 0xFF, 0xF7, 0xFC, 0x08, 0x00, 0x38, 0x70, 0xE7, 0xFF, 0xFF,
0xCE, 0x1C, 0x38, 0x70, 0xE1, 0xC3, 0x87, 0x0F, 0x8F, 0x04, 0xF0, 0x7F,
0x07, 0xF0, 0x7F, 0x07, 0xF0, 0x7F, 0x07, 0xF0, 0x7F, 0x07, 0xF0, 0x7F,
0x0F, 0x79, 0xF7, 0xFF, 0x3F, 0x70, 0x80, 0xF0, 0x7B, 0x83, 0x9E, 0x1C,
0x71, 0xE3, 0x8E, 0x1E, 0x70, 0x73, 0x83, 0xB8, 0x1D, 0xC0, 0x7E, 0x03,
0xE0, 0x1F, 0x00, 0x78, 0x00, 0xF0, 0xE1, 0xDC, 0x78, 0x77, 0x1F, 0x3D,
0xC7, 0xCE, 0x79, 0xF3, 0x8E, 0xEC, 0xE3, 0xBB, 0x78, 0xEC, 0xFC, 0x1F,
0x3F, 0x07, 0xCF, 0xC1, 0xF1, 0xE0, 0x7C, 0x78, 0x0E, 0x1E, 0x00, 0x78,
0xF3, 0xC7, 0x8F, 0x78, 0x3B, 0x81, 0xFC, 0x07, 0xC0, 0x1E, 0x01, 0xF0,
0x1F, 0xC0, 0xEF, 0x0F, 0x78, 0xF1, 0xE7, 0x87, 0x80, 0xF0, 0x7B, 0x83,
0x9E, 0x1C, 0xF1, 0xE3, 0x8E, 0x1E, 0x70, 0x73, 0x83, 0xB8, 0x1D, 0xC0,
0x7E, 0x03, 0xE0, 0x1F, 0x00, 0x78, 0x03, 0x80, 0x1C, 0x01, 0xE0, 0x3E,
0x01, 0xE0, 0x00, 0xFF, 0xFF, 0xFF, 0xFC, 0x1E, 0x0F, 0x83, 0xC1, 0xE0,
0xF0, 0x78, 0x3C, 0x0F, 0xFF, 0xFF, 0xFF, 0xC0, 0x06, 0x3C, 0xF9, 0xC3,
0x87, 0x0E, 0x1C, 0x38, 0x73, 0xC7, 0x0F, 0x07, 0x0E, 0x1C, 0x38, 0x70,
0xE1, 0xC3, 0xE7, 0xC7, 0x80, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xC3,
0xCF, 0x0C, 0x38, 0xE3, 0x8E, 0x38, 0xE3, 0xC7, 0x3C, 0xE3, 0x8E, 0x38,
0xE3, 0x8E, 0xF3, 0xCE, 0x00, 0x10, 0x0F, 0x85, 0xBD, 0xE1, 0xF0, 0x08,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80, 0xFC,
0x07, 0xE0, 0x3F, 0x01, 0xF8, 0x0F, 0xC0, 0x7E, 0x03, 0xF0, 0x1F, 0x80,
0xFC, 0x07, 0xFF, 0xFF, 0xFF, 0xC0 };
const GFXglyph ubitxGlyphs[] PROGMEM = {
{ 0, 13, 18, 17, 2, -17 }, // 0x14
{ 30, 13, 18, 17, 2, -17 }, // 0x15
{ 60, 13, 18, 17, 2, -17 }, // 0x16
{ 90, 13, 18, 17, 2, -17 }, // 0x17
{ 120, 13, 18, 17, 2, -17 }, // 0x18
{ 150, 13, 18, 17, 2, -17 }, // 0x19
{ 180, 13, 18, 17, 2, -17 }, // 0x1A
{ 210, 13, 18, 17, 2, -17 }, // 0x1B
{ 240, 13, 18, 17, 2, -17 }, // 0x1C
{ 270, 13, 18, 17, 2, -17 }, // 0x1D
{ 300, 13, 18, 17, 2, -17 }, // 0x1E
{ 330, 13, 18, 17, 2, -17 }, // 0x1F
{ 360, 0, 0, 7, 0, 1 }, // 0x20 ' '
{ 360, 3, 17, 8, 3, -16 }, // 0x21 '!'
{ 367, 9, 7, 11, 1, -17 }, // 0x22 '"'
{ 375, 13, 18, 13, 0, -16 }, // 0x23 '#'
{ 405, 12, 21, 13, 1, -17 }, // 0x24 '$'
{ 437, 20, 17, 21, 1, -16 }, // 0x25 '%'
{ 480, 16, 18, 17, 1, -16 }, // 0x26 '&'
{ 516, 4, 7, 6, 1, -17 }, // 0x27 '''
{ 520, 6, 23, 8, 1, -17 }, // 0x28 '('
{ 538, 6, 23, 8, 1, -17 }, // 0x29 ')'
{ 556, 8, 8, 9, 1, -17 }, // 0x2A '*'
{ 564, 12, 11, 14, 1, -10 }, // 0x2B '+'
{ 581, 3, 8, 7, 2, -3 }, // 0x2C ','
{ 584, 6, 3, 8, 1, -7 }, // 0x2D '-'
{ 587, 3, 4, 7, 2, -3 }, // 0x2E '.'
{ 589, 7, 17, 7, 0, -16 }, // 0x2F '/'
{ 604, 11, 18, 13, 1, -16 }, // 0x30 '0'
{ 629, 7, 17, 13, 2, -16 }, // 0x31 '1'
{ 644, 11, 17, 13, 1, -16 }, // 0x32 '2'
{ 668, 11, 18, 13, 1, -16 }, // 0x33 '3'
{ 693, 12, 17, 13, 1, -16 }, // 0x34 '4'
{ 719, 11, 18, 13, 1, -16 }, // 0x35 '5'
{ 744, 11, 18, 13, 1, -16 }, // 0x36 '6'
{ 769, 12, 17, 13, 1, -16 }, // 0x37 '7'
{ 795, 12, 18, 13, 1, -16 }, // 0x38 '8'
{ 822, 11, 18, 13, 1, -16 }, // 0x39 '9'
{ 847, 3, 12, 8, 3, -11 }, // 0x3A ':'
{ 852, 3, 16, 8, 3, -11 }, // 0x3B ';'
{ 858, 12, 11, 14, 1, -10 }, // 0x3C '<'
{ 875, 12, 9, 14, 1, -9 }, // 0x3D '='
{ 889, 12, 11, 14, 1, -10 }, // 0x3E '>'
{ 906, 11, 18, 15, 2, -17 }, // 0x3F '?'
{ 931, 22, 21, 23, 1, -17 }, // 0x40 '@'
{ 989, 16, 18, 17, 1, -17 }, // 0x41 'A'
{ 1025, 14, 18, 17, 2, -17 }, // 0x42 'B'
{ 1057, 15, 19, 17, 1, -17 }, // 0x43 'C'
{ 1093, 14, 18, 17, 2, -17 }, // 0x44 'D'
{ 1125, 13, 18, 16, 2, -17 }, // 0x45 'E'
{ 1155, 12, 18, 15, 2, -17 }, // 0x46 'F'
{ 1182, 16, 18, 19, 1, -17 }, // 0x47 'G'
{ 1218, 14, 18, 17, 2, -17 }, // 0x48 'H'
{ 1250, 3, 18, 7, 2, -17 }, // 0x49 'I'
{ 1257, 11, 19, 13, 1, -17 }, // 0x4A 'J'
{ 1284, 15, 18, 17, 2, -17 }, // 0x4B 'K'
{ 1318, 12, 18, 15, 2, -17 }, // 0x4C 'L'
{ 1345, 17, 18, 20, 2, -17 }, // 0x4D 'M'
{ 1384, 14, 18, 17, 2, -17 }, // 0x4E 'N'
{ 1416, 17, 19, 19, 1, -17 }, // 0x4F 'O'
{ 1457, 13, 18, 16, 2, -17 }, // 0x50 'P'
{ 1487, 17, 19, 19, 1, -17 }, // 0x51 'Q'
{ 1528, 14, 18, 17, 2, -17 }, // 0x52 'R'
{ 1560, 14, 19, 16, 1, -17 }, // 0x53 'S'
{ 1594, 14, 18, 15, 0, -17 }, // 0x54 'T'
{ 1626, 14, 19, 17, 2, -17 }, // 0x55 'U'
{ 1660, 15, 18, 16, 1, -17 }, // 0x56 'V'
{ 1694, 22, 18, 23, 0, -17 }, // 0x57 'W'
{ 1744, 15, 18, 16, 1, -17 }, // 0x58 'X'
{ 1778, 15, 18, 16, 1, -17 }, // 0x59 'Y'
{ 1812, 13, 18, 15, 1, -17 }, // 0x5A 'Z'
{ 1842, 5, 23, 8, 2, -17 }, // 0x5B '['
{ 1857, 7, 17, 7, 0, -16 }, // 0x5C '\'
{ 1872, 6, 23, 8, 0, -17 }, // 0x5D ']'
{ 1890, 12, 11, 14, 1, -16 }, // 0x5E '^'
{ 1907, 15, 2, 13, -1, 4 }, // 0x5F '_'
{ 1911, 5, 3, 8, 0, -17 }, // 0x60 '`'
{ 1913, 12, 14, 13, 1, -12 }, // 0x61 'a'
{ 1934, 13, 19, 15, 1, -17 }, // 0x62 'b'
{ 1965, 12, 14, 13, 1, -12 }, // 0x63 'c'
{ 1986, 12, 19, 15, 1, -17 }, // 0x64 'd'
{ 2015, 12, 14, 13, 1, -12 }, // 0x65 'e'
{ 2036, 8, 18, 8, 0, -17 }, // 0x66 'f'
{ 2054, 12, 18, 15, 1, -12 }, // 0x67 'g'
{ 2081, 11, 18, 15, 2, -17 }, // 0x68 'h'
{ 2106, 3, 18, 7, 2, -17 }, // 0x69 'i'
{ 2113, 5, 23, 7, 0, -17 }, // 0x6A 'j'
{ 2128, 12, 18, 13, 1, -17 }, // 0x6B 'k'
{ 2155, 3, 18, 7, 2, -17 }, // 0x6C 'l'
{ 2162, 19, 13, 21, 1, -12 }, // 0x6D 'm'
{ 2193, 11, 13, 15, 2, -12 }, // 0x6E 'n'
{ 2211, 13, 14, 15, 1, -12 }, // 0x6F 'o'
{ 2234, 13, 18, 15, 1, -12 }, // 0x70 'p'
{ 2264, 12, 18, 15, 1, -12 }, // 0x71 'q'
{ 2291, 7, 13, 9, 2, -12 }, // 0x72 'r'
{ 2303, 11, 14, 13, 1, -12 }, // 0x73 's'
{ 2323, 7, 17, 8, 0, -15 }, // 0x74 't'
{ 2338, 12, 14, 15, 1, -12 }, // 0x75 'u'
{ 2359, 13, 13, 13, 0, -12 }, // 0x76 'v'
{ 2381, 18, 13, 19, 0, -12 }, // 0x77 'w'
{ 2411, 13, 13, 13, 0, -12 }, // 0x78 'x'
{ 2433, 13, 18, 13, 0, -12 }, // 0x79 'y'
{ 2463, 10, 13, 12, 1, -12 }, // 0x7A 'z'
{ 2480, 7, 23, 9, 1, -17 }, // 0x7B '{'
{ 2501, 2, 23, 7, 2, -17 }, // 0x7C '|'
{ 2507, 6, 23, 9, 2, -17 }, // 0x7D '}'
{ 2525, 11, 5, 14, 1, -7 }, // 0x7E '~'
{ 2532, 13, 18, 17, 2, -17 } }; // 0x7F
const GFXfont ubitx_font PROGMEM = {
(uint8_t *)ubitxBitmaps,
(GFXglyph *)ubitxGlyphs,
0x14, 0x7F, 33 };
// Approx. 3325 bytes
// Color definitions
#define ILI9341_BLACK 0x0000 ///< 0, 0, 0
#define ILI9341_NAVY 0x000F ///< 0, 0, 123
#define ILI9341_DARKGREEN 0x03E0 ///< 0, 125, 0
#define ILI9341_DARKCYAN 0x03EF ///< 0, 125, 123
#define ILI9341_MAROON 0x7800 ///< 123, 0, 0
#define ILI9341_PURPLE 0x780F ///< 123, 0, 123
#define ILI9341_OLIVE 0x7BE0 ///< 123, 125, 0
#define ILI9341_LIGHTGREY 0xC618 ///< 198, 195, 198
#define ILI9341_DARKGREY 0x7BEF ///< 123, 125, 123
#define ILI9341_BLUE 0x001F ///< 0, 0, 255
#define ILI9341_GREEN 0x07E0 ///< 0, 255, 0
#define ILI9341_CYAN 0x07FF ///< 0, 255, 255
#define ILI9341_RED 0xF800 ///< 255, 0, 0
#define ILI9341_MAGENTA 0xF81F ///< 255, 0, 255
#define ILI9341_YELLOW 0xFFE0 ///< 255, 255, 0
#define ILI9341_WHITE 0xFFFF ///< 255, 255, 255
#define ILI9341_ORANGE 0xFD20 ///< 255, 165, 0
#define ILI9341_GREENYELLOW 0xAFE5 ///< 173, 255, 41
#define ILI9341_PINK 0xFC18 ///< 255, 130, 198

289
ubitx_keyer.ino Normal file
View File

@ -0,0 +1,289 @@
/**
CW Keyer
CW Key logic change with ron's code (ubitx_keyer.cpp)
Ron's logic has been modified to work with the original uBITX by KD8CEC
Original Comment ----------------------------------------------------------------------------
* The CW keyer handles either a straight key or an iambic / paddle key.
* They all use just one analog input line. This is how it works.
* The analog line has the internal pull-up resistor enabled.
* When a straight key is connected, it shorts the pull-up resistor, analog input is 0 volts
* When a paddle is connected, the dot and the dash are connected to the analog pin through
* a 10K and a 2.2K resistors. These produce a 4v and a 2v input to the analog pins.
* So, the readings are as follows :
* 0v - straight key
* 1-2.5 v - paddle dot
* 2.5 to 4.5 v - paddle dash
* 2.0 to 0.5 v - dot and dash pressed
*
* The keyer is written to transparently handle all these cases
*
* Generating CW
* The CW is cleanly generated by unbalancing the front-end mixer
* and putting the local oscillator directly at the CW transmit frequency.
* The sidetone, generated by the Arduino is injected into the volume control
*/
//CW ADC Range
int cwAdcSTFrom = 0;
int cwAdcSTTo = 50;
int cwAdcBothFrom = 51;
int cwAdcBothTo = 300;
int cwAdcDotFrom = 301;
int cwAdcDotTo = 600;
int cwAdcDashFrom = 601;
int cwAdcDashTo = 800;
//byte cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
byte delayBeforeCWStartTime = 50;
// in milliseconds, this is the parameter that determines how long the tx will hold between cw key downs
//#define CW_TIMEOUT (600l) //Change to CW Delaytime for value save to eeprom
#define PADDLE_DOT 1
#define PADDLE_DASH 2
#define PADDLE_BOTH 3
#define PADDLE_STRAIGHT 4
//we store the last padde's character
//to alternatively send dots and dashes
//when both are simultaneously pressed
char lastPaddle = 0;
/*
//reads the analog keyer pin and reports the paddle
byte getPaddle(){
int paddle = analogRead(ANALOG_KEYER);
//handle the ptt as the straight key
if (digitalRead(PTT) == 0)
return PADDLE_STRAIGHT;
if (paddle > 800) // above 4v is up
return 0;
if (!Iambic_Key)
return PADDLE_STRAIGHT;
if (paddle > 600) // 4-3v is dot
return PADDLE_DASH;
else if (paddle > 300) //1-2v is dash
return PADDLE_DOT;
else if (paddle > 50)
return PADDLE_BOTH; //both are between 1 and 2v
else
return PADDLE_STRAIGHT; //less than 1v is the straight key
}
*/
/**
* Starts transmitting the carrier with the sidetone
* It assumes that we have called cwTxStart and not called cwTxStop
* each time it is called, the cwTimeOut is pushed further into the future
*/
void cwKeydown(){
keyDown = 1; //tracks the CW_KEY
tone(CW_TONE, (int)sideTone);
digitalWrite(CW_KEY, 1);
//Modified by KD8CEC, for CW Delay Time save to eeprom
//cwTimeout = millis() + CW_TIMEOUT;
cwTimeout = millis() + cwDelayTime * 10;
}
/**
* Stops the cw carrier transmission along with the sidetone
* Pushes the cwTimeout further into the future
*/
void cwKeyUp(){
keyDown = 0; //tracks the CW_KEY
noTone(CW_TONE);
digitalWrite(CW_KEY, 0);
//Modified by KD8CEC, for CW Delay Time save to eeprom
//cwTimeout = millis() + CW_TIMEOUT;
cwTimeout = millis() + cwDelayTime * 10;
}
//Variables for Ron's new logic
#define DIT_L 0x01 // DIT latch
#define DAH_L 0x02 // DAH latch
#define DIT_PROC 0x04 // DIT is being processed
#define PDLSWAP 0x08 // 0 for normal, 1 for swap
#define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
enum KSTYPE {IDLE, CHK_DIT, CHK_DAH, KEYED_PREP, KEYED, INTER_ELEMENT };
static unsigned long ktimer;
unsigned char keyerState = IDLE;
//Below is a test to reduce the keying error. do not delete lines
//create by KD8CEC for compatible with new CW Logic
char update_PaddleLatch(byte isUpdateKeyState) {
unsigned char tmpKeyerControl = 0;
int paddle = analogRead(ANALOG_KEYER);
//diagnostic, VU2ESE
//itoa(paddle, b, 10);
//printLine2(b);
//use the PTT as the key for tune up, quick QSOs
if (digitalRead(PTT) == 0)
tmpKeyerControl |= DIT_L;
else if (paddle >= cwAdcDashFrom && paddle <= cwAdcDashTo)
tmpKeyerControl |= DAH_L;
else if (paddle >= cwAdcDotFrom && paddle <= cwAdcDotTo)
tmpKeyerControl |= DIT_L;
else if (paddle >= cwAdcBothFrom && paddle <= cwAdcBothTo)
tmpKeyerControl |= (DAH_L | DIT_L) ;
else
{
if (Iambic_Key)
tmpKeyerControl = 0 ;
else if (paddle >= cwAdcSTFrom && paddle <= cwAdcSTTo)
tmpKeyerControl = DIT_L ;
else
tmpKeyerControl = 0 ;
}
if (isUpdateKeyState == 1)
keyerControl |= tmpKeyerControl;
return tmpKeyerControl;
}
/*****************************************************************************
// New logic, by RON
// modified by KD8CEC
******************************************************************************/
void cwKeyer(void){
lastPaddle = 0;
bool continue_loop = true;
unsigned tmpKeyControl = 0;
if( Iambic_Key ) {
while(continue_loop) {
switch (keyerState) {
case IDLE:
tmpKeyControl = update_PaddleLatch(0);
if ( tmpKeyControl == DAH_L || tmpKeyControl == DIT_L ||
tmpKeyControl == (DAH_L | DIT_L) || (keyerControl & 0x03)) {
update_PaddleLatch(1);
keyerState = CHK_DIT;
}else{
if (0 < cwTimeout && cwTimeout < millis()){
cwTimeout = 0;
stopTx();
}
continue_loop = false;
}
break;
case CHK_DIT:
if (keyerControl & DIT_L) {
keyerControl |= DIT_PROC;
ktimer = cwSpeed;
keyerState = KEYED_PREP;
}else{
keyerState = CHK_DAH;
}
break;
case CHK_DAH:
if (keyerControl & DAH_L) {
ktimer = cwSpeed*3;
keyerState = KEYED_PREP;
}else{
keyerState = IDLE;
}
break;
case KEYED_PREP:
//modified KD8CEC
if (!inTx){
//DelayTime Option
active_delay(delayBeforeCWStartTime * 2);
keyDown = 0;
cwTimeout = millis() + cwDelayTime * 10; //+ CW_TIMEOUT;
startTx(TX_CW);
}
ktimer += millis(); // set ktimer to interval end time
keyerControl &= ~(DIT_L + DAH_L); // clear both paddle latch bits
keyerState = KEYED; // next state
cwKeydown();
break;
case KEYED:
if (millis() > ktimer) { // are we at end of key down ?
cwKeyUp();
ktimer = millis() + cwSpeed; // inter-element time
keyerState = INTER_ELEMENT; // next state
}else if (keyerControl & IAMBICB) {
update_PaddleLatch(1); // early paddle latch in Iambic B mode
}
break;
case INTER_ELEMENT:
// Insert time between dits/dahs
update_PaddleLatch(1); // latch paddle state
if (millis() > ktimer) { // are we at end of inter-space ?
if (keyerControl & DIT_PROC) { // was it a dit or dah ?
keyerControl &= ~(DIT_L + DIT_PROC); // clear two bits
keyerState = CHK_DAH; // dit done, check for dah
}else{
keyerControl &= ~(DAH_L); // clear dah latch
keyerState = IDLE; // go idle
}
}
break;
}
checkCAT();
} //end of while
}
else{
while(1){
char state = update_PaddleLatch(0);
// Serial.println((int)state);
if (state == DIT_L) {
// if we are here, it is only because the key is pressed
if (!inTx){
startTx(TX_CW);
//DelayTime Option
active_delay(delayBeforeCWStartTime * 2);
keyDown = 0;
cwTimeout = millis() + cwDelayTime * 10; //+ CW_TIMEOUT;
}
cwKeydown();
while ( update_PaddleLatch(0) == DIT_L )
active_delay(1);
cwKeyUp();
}
else{
if (0 < cwTimeout && cwTimeout < millis()){
cwTimeout = 0;
keyDown = 0;
stopTx();
}
//if (!cwTimeout) //removed by KD8CEC
// return;
// got back to the beginning of the loop, if no further activity happens on straight key
// we will time out, and return out of this routine
//delay(5);
//delay_background(5, 3); //removed by KD8CEC
//continue; //removed by KD8CEC
return; //Tx stop control by Main Loop
}
checkCAT();
} //end of while
} //end of elese
}

402
ubitx_setup.ino Normal file
View File

@ -0,0 +1,402 @@
/** Menus
* The Radio menus are accessed by tapping on the function button.
* - The main loop() constantly looks for a button press and calls doMenu() when it detects
* a function button press.
* - As the encoder is rotated, at every 10th pulse, the next or the previous menu
* item is displayed. Each menu item is controlled by it's own function.
* - Eache menu function may be called to display itself
* - Each of these menu routines is called with a button parameter.
* - The btn flag denotes if the menu itme was clicked on or not.
* - If the menu item is clicked on, then it is selected,
* - If the menu item is NOT clicked on, then the menu's prompt is to be displayed
*/
void drawCommandbar(char *text){
utftFillrect(30,45,280, 32, ILI9341_NAVY);
displayRawText(text, 30, 45, ILI9341_WHITE, ILI9341_NAVY);
}
/** A generic control to read variable values
*/
int getValueByKnob(int minimum, int maximum, int step_size, int initial, char* prefix, char *postfix)
{
int knob = 0;
int knob_value;
while (btnDown())
active_delay(100);
active_delay(200);
knob_value = initial;
strcpy(b, prefix);
itoa(knob_value, c, 10);
strcat(b, c);
strcat(b, postfix);
drawCommandbar(b);
//printLine2(b);
//active_delay(300);
while(!btnDown() && digitalRead(PTT) == HIGH){
knob = enc_read();
if (knob != 0){
if (knob_value > minimum && knob < 0)
knob_value -= step_size;
if (knob_value < maximum && knob > 0)
knob_value += step_size;
//printLine2(prefix);
strcpy(b, prefix);
itoa(knob_value, c, 10);
strcat(b, c);
strcat(b, postfix);
drawCommandbar(b);
// utftFillrect(30,41,280, 32, ILI9341_NAVY);
// displayRawText(b, 30, 41, ILI9341_WHITE, ILI9341_NAVY);
//printLine1(b);
}
checkCAT();
}
utftFillrect(30,41,280, 32, ILI9341_NAVY);
return knob_value;
}
// The generic routine to display one line on the LCD
void printLine(int linenmbr, char *c) {
if (strcmp(c, printBuff[linenmbr])) { // only refresh the display when there was a change
utftFillrect(50, 100 + (50 * linenmbr), 200, 40, ILI9341_BLACK);
displayRawText(c, 50, 100 + (50 * linenmbr), ILI9341_WHITE, ILI9341_BLACK);
strcpy(printBuff[linenmbr], c);
}
}
// short cut to print to the first line
void printLine1(char *c){
printLine(1,c);
//displayText(c, 0,180,320, 25, ILI9341_YELLOW, ILI9341_BLACK, ILI9341_BLUE);
}
// short cut to print to the first line
void printLine2(char *c){
printLine(0,c);
//displayText(c, 0,210,320, 25, ILI9341_YELLOW, ILI9341_BLACK, ILI9341_BLUE);
}
void printFLine1(String s){
printLine1(s.c_str());
}
void printFLine2(String s){
printLine2(s.c_str());
}
void setupExit(){
menuOn = 0;
guiUpdate();
}
void printCarrierFreq(unsigned long freq){
memset(c, 0, sizeof(c));
memset(b, 0, sizeof(b));
ultoa(freq, b, DEC);
strncat(c, b, 2);
strcat(c, ".");
strncat(c, &b[2], 3);
strcat(c, ".");
strncat(c, &b[5], 1);
displayText(c, 110, 100, 100, 30, ILI9341_CYAN, ILI9341_NAVY, ILI9341_NAVY);
}
void displayDialog(char *title, char *instructions){
displayClear(ILI9341_BLACK);
utftRect(10,10,300,220, ILI9341_WHITE);
utftHline(20,45,280,ILI9341_WHITE);
utftRect(12,12,296,216, ILI9341_WHITE);
displayRawText(title, 20, 20, ILI9341_CYAN, ILI9341_NAVY);
displayRawText(instructions, 20, 200, ILI9341_CYAN, ILI9341_NAVY);
}
//this is used by the si5351 routines in the ubitx_5351 file
extern int32_t calibration;
extern uint32_t si5351bx_vcoa;
int setupFreq(){
int knob = 0;
int32_t prev_calibration;
displayDialog("Set Frequency", "Push TUNE to Save");
//round off the the nearest khz
frequency = (frequency/1000l)* 1000l;
setFrequency(frequency);
displayRawText("You should have a", 20, 50, ILI9341_CYAN, ILI9341_NAVY);
displayRawText("signal exactly at ", 20, 75, ILI9341_CYAN, ILI9341_NAVY);
ltoa(c, frequency/1000l, 10);
displayRawText(c, 20, 100, ILI9341_CYAN, ILI9341_NAVY);
displayRawText("Rotate to zerobeat", 20, 180, ILI9341_CYAN, ILI9341_NAVY);
//keep clear of any previous button press
while (btnDown())
active_delay(100);
active_delay(100);
prev_calibration = calibration;
calibration = 0;
// ltoa(calibration/8750, c, 10);
// strcpy(b, c);
// strcat(b, "Hz");
// printLine2(b);
while (!btnDown())
{
knob = enc_read();
if (knob != 0)
calibration += knob * 875;
/* else if (knob < 0)
calibration -= 875; */
else
continue; //don't update the frequency or the display
si5351bx_setfreq(0, usbCarrier); //set back the cardrier oscillator anyway, cw tx switches it off
si5351_set_calibration(calibration);
setFrequency(frequency);
//displayRawText("Rotate to zerobeat", 20, 120, ILI9341_CYAN, ILI9341_NAVY);
ltoa(calibration, b, 10);
displayText(b, 100, 140, 100, 26, ILI9341_CYAN, ILI9341_NAVY, ILI9341_WHITE);
}
EEPROM.put(MASTER_CAL, calibration);
initOscillators();
si5351_set_calibration(calibration);
setFrequency(frequency);
//debounce and delay
while(btnDown())
active_delay(50);
active_delay(100);
}
void setupBFO(){
int knob = 0;
unsigned long prevCarrier;
prevCarrier = usbCarrier;
displayDialog("Set BFO", "Press TUNE to Save");
usbCarrier = 11053000l;
si5351bx_setfreq(0, usbCarrier);
printCarrierFreq(usbCarrier);
while (!btnDown()){
knob = enc_read();
if (knob != 0)
usbCarrier -= 50 * knob;
else
continue; //don't update the frequency or the display
si5351bx_setfreq(0, usbCarrier);
setFrequency(frequency);
printCarrierFreq(usbCarrier);
active_delay(100);
}
EEPROM.put(USB_CAL, usbCarrier);
si5351bx_setfreq(0, usbCarrier);
setFrequency(frequency);
updateDisplay();
printLine2("");
menuOn = 0;
}
void setupCwDelay(){
int knob = 0;
int prev_cw_delay;
displayDialog("Set CW T/R Delay", "Press tune to Save");
active_delay(500);
prev_cw_delay = cwDelayTime;
itoa(10 * (int)cwDelayTime, b, 10);
strcat(b, " msec");
displayText(b, 100, 100, 120, 26, ILI9341_CYAN, ILI9341_BLACK, ILI9341_BLACK);
while (!btnDown()){
knob = enc_read();
if (knob < 0 && cwDelayTime > 10)
cwDelayTime -= 10;
else if (knob > 0 && cwDelayTime < 100)
cwDelayTime += 10;
else
continue; //don't update the frequency or the display
itoa(10 * (int)cwDelayTime, b, 10);
strcat(b, " msec");
displayText(b, 100, 100, 120, 26, ILI9341_CYAN, ILI9341_BLACK, ILI9341_BLACK);
}
EEPROM.put(CW_DELAYTIME, cwDelayTime);
// cwDelayTime = getValueByKnob(10, 1000, 50, cwDelayTime, "CW Delay>", " msec");
active_delay(500);
menuOn = 0;
}
void setupKeyer(){
int tmp_key, knob;
displayDialog("Set CW Keyer", "Press tune to Save");
if (!Iambic_Key)
displayText("< Hand Key >", 100, 100, 120, 26, ILI9341_CYAN, ILI9341_BLACK, ILI9341_BLACK);
else if (keyerControl & IAMBICB)
displayText("< Iambic A >", 100, 100, 120, 26, ILI9341_CYAN, ILI9341_BLACK, ILI9341_BLACK);
else
displayText("< Iambic B >", 100, 100, 120, 26, ILI9341_CYAN, ILI9341_BLACK, ILI9341_BLACK);
if (!Iambic_Key)
tmp_key = 0; //hand key
else if (keyerControl & IAMBICB)
tmp_key = 2; //Iambic B
else
tmp_key = 1;
while (!btnDown())
{
knob = enc_read();
if (knob == 0){
active_delay(50);
continue;
}
if (knob < 0 && tmp_key > 0)
tmp_key--;
if (knob > 0)
tmp_key++;
if (tmp_key > 2)
tmp_key = 0;
if (tmp_key == 0)
displayText("< Hand Key >", 100, 100, 120, 26, ILI9341_CYAN, ILI9341_BLACK, ILI9341_BLACK);
else if (tmp_key == 1)
displayText("< Iambic A >", 100, 100, 120, 26, ILI9341_CYAN, ILI9341_BLACK, ILI9341_BLACK);
else if (tmp_key == 2)
displayText("< Iambic B >", 100, 100, 120, 26, ILI9341_CYAN, ILI9341_BLACK, ILI9341_BLACK);
}
active_delay(500);
if (tmp_key == 0)
Iambic_Key = false;
else if (tmp_key == 1){
Iambic_Key = true;
keyerControl &= ~IAMBICB;
}
else if (tmp_key == 2){
Iambic_Key = true;
keyerControl |= IAMBICB;
}
EEPROM.put(CW_KEY_TYPE, tmp_key);
menuOn = 0;
}
void drawSetupMenu(){
displayClear(ILI9341_BLACK);
displayText("Setup", 10, 10, 300, 35, ILI9341_WHITE, ILI9341_NAVY, ILI9341_WHITE);
utftRect(10,10,300,220, ILI9341_WHITE);
displayRawText("Set Freq...", 30, 50, ILI9341_WHITE, ILI9341_NAVY);
displayRawText("Set BFO...", 30, 80, ILI9341_WHITE, ILI9341_NAVY);
displayRawText("CW Delay...", 30, 110, ILI9341_WHITE, ILI9341_NAVY);
displayRawText("CW Keyer...", 30, 140, ILI9341_WHITE, ILI9341_NAVY);
displayRawText("Touch Screen...", 30, 170, ILI9341_WHITE, ILI9341_NAVY);
displayRawText("Exit", 30, 200, ILI9341_WHITE, ILI9341_NAVY);
}
static int prevPuck = -1;
void movePuck(int i){
if (prevPuck >= 0)
utftRect(15, 49 + (prevPuck * 30), 290, 25, ILI9341_NAVY);
utftRect(15, 49 + (i * 30), 290, 25, ILI9341_WHITE);
prevPuck = i;
}
void doSetup2(){
int select=0, i,btnState;
drawSetupMenu();
movePuck(select);
//wait for the button to be raised up
while(btnDown())
active_delay(50);
active_delay(50); //debounce
menuOn = 2;
while (menuOn){
i = enc_read();
if (i > 0){
if (select + i < 60)
select += i;
movePuck(select/10);
}
if (i < 0 && select - i >= 0){
select += i; //caught ya, i is already -ve here, so you add it
movePuck(select/10);
}
if (!btnDown()){
active_delay(50);
continue;
}
//wait for the touch to lift off and debounce
while(btnDown()){
active_delay(50);
}
active_delay(300);
if (select < 10)
setupFreq();
else if (select < 20 )
setupBFO();
else if (select < 30 )
setupCwDelay();
else if (select < 40)
setupKeyer();
else if (select < 50)
setupTouch();
else
setupExit();
//redraw
drawSetupMenu();
}
//debounce the button
while(btnDown())
active_delay(50);
active_delay(50);
checkCAT();
guiUpdate();
}

125
ubitx_si5351.ino Normal file
View File

@ -0,0 +1,125 @@
// ************* SI5315 routines - tks Jerry Gaffke, KE7ER ***********************
// An minimalist standalone set of Si5351 routines.
// VCOA is fixed at 875mhz, VCOB not used.
// The output msynth dividers are used to generate 3 independent clocks
// with 1hz resolution to any frequency between 4khz and 109mhz.
// Usage:
// Call si5351bx_init() once at startup with no args;
// Call si5351bx_setfreq(clknum, freq) each time one of the
// three output CLK pins is to be updated to a new frequency.
// A freq of 0 serves to shut down that output clock.
// The global variable si5351bx_vcoa starts out equal to the nominal VCOA
// frequency of 25mhz*35 = 875000000 Hz. To correct for 25mhz crystal errors,
// the user can adjust this value. The vco frequency will not change but
// the number used for the (a+b/c) output msynth calculations is affected.
// Example: We call for a 5mhz signal, but it measures to be 5.001mhz.
// So the actual vcoa frequency is 875mhz*5.001/5.000 = 875175000 Hz,
// To correct for this error: si5351bx_vcoa=875175000;
// Most users will never need to generate clocks below 500khz.
// But it is possible to do so by loading a value between 0 and 7 into
// the global variable si5351bx_rdiv, be sure to return it to a value of 0
// before setting some other CLK output pin. The affected clock will be
// divided down by a power of two defined by 2**si5351_rdiv
// A value of zero gives a divide factor of 1, a value of 7 divides by 128.
// This lightweight method is a reasonable compromise for a seldom used feature.
#define BB0(x) ((uint8_t)x) // Bust int32 into Bytes
#define BB1(x) ((uint8_t)(x>>8))
#define BB2(x) ((uint8_t)(x>>16))
#define SI5351BX_ADDR 0x60 // I2C address of Si5351 (typical)
#define SI5351BX_XTALPF 2 // 1:6pf 2:8pf 3:10pf
// If using 27mhz crystal, set XTAL=27000000, MSA=33. Then vco=891mhz
#define SI5351BX_XTAL 25000000 // Crystal freq in Hz
#define SI5351BX_MSA 35 // VCOA is at 25mhz*35 = 875mhz
// User program may have reason to poke new values into these 3 RAM variables
uint32_t si5351bx_vcoa = (SI5351BX_XTAL*SI5351BX_MSA); // 25mhzXtal calibrate
uint8_t si5351bx_rdiv = 0; // 0-7, CLK pin sees fout/(2**rdiv)
uint8_t si5351bx_drive[3] = {3, 3, 3}; // 0=2ma 1=4ma 2=6ma 3=8ma for CLK 0,1,2
uint8_t si5351bx_clken = 0xFF; // Private, all CLK output drivers off
int32_t calibration = 0;
void i2cWrite(uint8_t reg, uint8_t val) { // write reg via i2c
Wire.beginTransmission(SI5351BX_ADDR);
Wire.write(reg);
Wire.write(val);
Wire.endTransmission();
}
void i2cWriten(uint8_t reg, uint8_t *vals, uint8_t vcnt) { // write array
Wire.beginTransmission(SI5351BX_ADDR);
Wire.write(reg);
while (vcnt--) Wire.write(*vals++);
Wire.endTransmission();
}
void si5351bx_init() { // Call once at power-up, start PLLA
uint8_t reg; uint32_t msxp1;
Wire.begin();
i2cWrite(149, 0); // SpreadSpectrum off
i2cWrite(3, si5351bx_clken); // Disable all CLK output drivers
i2cWrite(183, SI5351BX_XTALPF << 6); // Set 25mhz crystal load capacitance
msxp1 = 128 * SI5351BX_MSA - 512; // and msxp2=0, msxp3=1, not fractional
uint8_t vals[8] = {0, 1, BB2(msxp1), BB1(msxp1), BB0(msxp1), 0, 0, 0};
i2cWriten(26, vals, 8); // Write to 8 PLLA msynth regs
i2cWrite(177, 0x20); // Reset PLLA (0x80 resets PLLB)
// for (reg=16; reg<=23; reg++) i2cWrite(reg, 0x80); // Powerdown CLK's
// i2cWrite(187, 0); // No fannout of clkin, xtal, ms0, ms4
//initializing the ppl2 as well
i2cWriten(34, vals, 8); // Write to 8 PLLA msynth regs
i2cWrite(177, 0xa0); // Reset PLLA & PPLB (0x80 resets PLLB)
}
void si5351bx_setfreq(uint8_t clknum, uint32_t fout) { // Set a CLK to fout Hz
uint32_t msa, msb, msc, msxp1, msxp2, msxp3p2top;
if ((fout < 500000) || (fout > 109000000)) // If clock freq out of range
si5351bx_clken |= 1 << clknum; // shut down the clock
else {
msa = si5351bx_vcoa / fout; // Integer part of vco/fout
msb = si5351bx_vcoa % fout; // Fractional part of vco/fout
msc = fout; // Divide by 2 till fits in reg
while (msc & 0xfff00000) {
msb = msb >> 1;
msc = msc >> 1;
}
msxp1 = (128 * msa + 128 * msb / msc - 512) | (((uint32_t)si5351bx_rdiv) << 20);
msxp2 = 128 * msb - 128 * msb / msc * msc; // msxp3 == msc;
msxp3p2top = (((msc & 0x0F0000) << 4) | msxp2); // 2 top nibbles
uint8_t vals[8] = { BB1(msc), BB0(msc), BB2(msxp1), BB1(msxp1),
BB0(msxp1), BB2(msxp3p2top), BB1(msxp2), BB0(msxp2)
};
i2cWriten(42 + (clknum * 8), vals, 8); // Write to 8 msynth regs
// if (clknum == 1) //PLLB | MS src | drive current
// i2cWrite(16 + clknum, 0x20 | 0x0C | si5351bx_drive[clknum]); // use local msynth
// else
i2cWrite(16 + clknum, 0x0C | si5351bx_drive[clknum]); // use local msynth
si5351bx_clken &= ~(1 << clknum); // Clear bit to enable clock
}
i2cWrite(3, si5351bx_clken); // Enable/disable clock
}
void si5351_set_calibration(int32_t cal){
si5351bx_vcoa = (SI5351BX_XTAL * SI5351BX_MSA) + cal; // apply the calibration correction factor
si5351bx_setfreq(0, usbCarrier);
}
void initOscillators(){
//initialize the SI5351
si5351bx_init();
si5351bx_vcoa = (SI5351BX_XTAL * SI5351BX_MSA) + calibration; // apply the calibration correction factor
si5351bx_setfreq(0, usbCarrier);
}

835
ubitx_ui.ino Normal file
View File

@ -0,0 +1,835 @@
/**
* The user interface of the ubitx consists of the encoder, the push-button on top of it
* and the 16x2 LCD display.
* The upper line of the display is constantly used to display frequency and status
* of the radio. Occasionally, it is used to provide a two-line information that is
* quickly cleared up.
*/
#define BUTTON_SELECTED 1
struct Button {
int x, y, w, h;
char *text;
char *morse;
};
#define MAX_BUTTONS 17
const struct Button btn_set[MAX_BUTTONS] PROGMEM = {
//const struct Button btn_set [] = {
{0, 10, 159, 36, "VFOA", "A"},
{160, 10, 159, 36, "VFOB", "B"},
{0, 80, 60, 36, "RIT", "R"},
{64, 80, 60, 36, "USB", "U"},
{128, 80, 60, 36, "LSB", "L"},
{192, 80, 60, 36, "CW", "M"},
{256, 80, 60, 36, "SPL", "S"},
{0, 120, 60, 36, "80", "8"},
{64, 120, 60, 36, "40", "4"},
{128, 120, 60, 36, "30", "3"},
{192, 120, 60, 36, "20", "2"},
{256, 120, 60, 36, "17", "7"},
{0, 160, 60, 36, "15", "5"},
{64, 160, 60, 36, "10", "1"},
{128, 160, 60, 36, "WPM", "W"},
{192, 160, 60, 36, "TON", "T"},
{256, 160, 60, 36, "FRQ", "F"},
};
#define MAX_KEYS 17
const struct Button keypad[MAX_KEYS] PROGMEM = {
{0, 80, 60, 36, "1", "1"},
{64, 80, 60, 36, "2", "2"},
{128, 80, 60, 36, "3", "3"},
{192, 80, 60, 36, "", ""},
{256, 80, 60, 36, "OK", "K"},
{0, 120, 60, 36, "4", "4"},
{64, 120, 60, 36, "5", "5"},
{128, 120, 60, 36, "6", "6"},
{192, 120, 60, 36, "0", "0"},
{256, 120, 60, 36, "<-", "B"},
{0, 160, 60, 36, "7", "7"},
{64, 160, 60, 36, "8", "8"},
{128, 160, 60, 36, "9", "9"},
{192, 160, 60, 36, "", ""},
{256, 160, 60, 36, "Can", "C"},
};
boolean getButton(char *text, struct Button *b){
for (int i = 0; i < MAX_BUTTONS; i++){
memcpy_P(b, btn_set + i, sizeof(struct Button));
if (!strcmp(text, b->text)){
return true;
}
}
return false;
}
char vfoDisplay[12];
void displayVFO(int vfo){
int x, y;
int displayColor, displayBorder;
Button b;
if (vfo == VFO_A){
getButton("VFOA", &b);
if (splitOn){
if (vfoActive == VFO_A)
strcpy(c, "R:");
else
strcpy(c, "T:");
}
else
strcpy(c, "A:");
if (vfoActive == VFO_A){
formatFreq(frequency, c+2);
displayColor = ILI9341_WHITE;
displayBorder = ILI9341_BLACK;
}else{
formatFreq(vfoA, c+2);
displayColor = ILI9341_GREEN;
displayBorder = ILI9341_BLACK;
}
}
if (vfo == VFO_B){
getButton("VFOB", &b);
if (splitOn){
if (vfoActive == VFO_B)
strcpy(c, "R:");
else
strcpy(c, "T:");
}
else
strcpy(c, "B:");
if (vfoActive == VFO_B){
formatFreq(frequency, c+2);
displayColor = ILI9341_WHITE;
displayBorder = ILI9341_WHITE;
} else {
displayColor = ILI9341_GREEN;
displayBorder = ILI9341_BLACK;
formatFreq(vfoB, c+2);
}
}
if (vfoDisplay[0] == 0){
utftFillrect(b.x, b.y, b.w, b.h, ILI9341_BLACK);
if (vfoActive == vfo)
utftRect(b.x, b.y, b.w , b.h, ILI9341_WHITE);
else
utftRect(b.x, b.y, b.w , b.h, ILI9341_NAVY);
}
x = b.x + 6;
y = b.y + 3;
char *text = c;
for (int i = 0; i <= strlen(c); i++){
char digit = c[i];
if (digit != vfoDisplay[i]){
utftFillrect(x, y, 15, b.h-6, ILI9341_BLACK);
//checkCAT();
displayChar(x, y + TEXT_LINE_HEIGHT + 3, digit, displayColor, ILI9341_BLACK);
checkCAT();
}
if (digit == ':' || digit == '.')
x += 7;
else
x += 16;
text++;
}//end of the while loop of the characters to be printed
strcpy(vfoDisplay, c);
}
void btnDraw(struct Button *b){
if (!strcmp(b->text, "VFOA")){
memset(vfoDisplay, 0, sizeof(vfoDisplay));
displayVFO(VFO_A);
}
else if(!strcmp(b->text, "VFOB")){
memset(vfoDisplay, 0, sizeof(vfoDisplay));
displayVFO(VFO_B);
}
else if ((!strcmp(b->text, "RIT") && ritOn == 1) ||
(!strcmp(b->text, "USB") && isUSB == 1) ||
(!strcmp(b->text, "LSB") && isUSB == 0) ||
(!strcmp(b->text, "SPL") && splitOn == 1))
displayText(b->text, b->x, b->y, b->w, b->h, ILI9341_BLACK, ILI9341_ORANGE, ILI9341_DARKGREY);
else if (!strcmp(b->text, "CW") && cwMode == 1)
displayText(b->text, b->x, b->y, b->w, b->h, ILI9341_BLACK, ILI9341_ORANGE, ILI9341_DARKGREY);
else
displayText(b->text, b->x, b->y, b->w, b->h, ILI9341_GREEN, ILI9341_BLACK, ILI9341_DARKGREY);
}
void displayRIT(){
utftFillrect(0,41,320,30, ILI9341_NAVY);
if (ritOn){
strcpy(c, "TX:");
formatFreq(ritTxFrequency, c+3);
if (vfoActive == VFO_A)
displayText(c, 0, 45,159, 30, ILI9341_WHITE, ILI9341_NAVY, ILI9341_NAVY);
else
displayText(c, 160, 45,159, 30, ILI9341_WHITE, ILI9341_NAVY, ILI9341_NAVY);
}
else {
if (vfoActive == VFO_A)
displayText("", 0, 45,159, 30, ILI9341_WHITE, ILI9341_NAVY, ILI9341_NAVY);
else
displayText("", 160, 45,159, 30, ILI9341_WHITE, ILI9341_NAVY, ILI9341_NAVY);
}
}
void fastTune(){
int encoder;
//if the btn is down, wait until it is up
while(btnDown())
active_delay(50);
active_delay(300);
displayRawText("Fast tune", 100, 55, ILI9341_CYAN, ILI9341_NAVY);
while(1){
checkCAT();
//exit after debouncing the btnDown
if (btnDown()){
utftFillrect(100, 55, 120, 30, ILI9341_NAVY);
//wait until the button is realsed and then return
while(btnDown())
active_delay(50);
active_delay(300);
return;
}
encoder = enc_read();
if (encoder != 0){
if (encoder > 0 && frequency < 30000000l)
frequency += 50000l;
else if (encoder < 0 && frequency > 600000l)
frequency -= 50000l;
setFrequency(frequency);
displayVFO(vfoActive);
}
}// end of the event loop
}
void enterFreq(){
//force the display to refresh everything
//display all the buttons
int f;
for (int i = 0; i < MAX_KEYS; i++){
struct Button b;
memcpy_P(&b, keypad + i, sizeof(struct Button));
btnDraw(&b);
}
int cursor_pos = 0;
int encoder;
memset(c, 0, sizeof(c));
f = frequency / 1000l;
while(1){
checkCAT();
/*
encoder = enc_read();
if (encoder != 0){
if (c[0] = 0){
itoa(c, f, 10);
Serial.print("f");
Serial.println(f);
drawCommandbar(c);
}
if (encoder < 0 && f < 30000)
f += 100;
else if (encoder > 0 && f > 600)
f -= 100;
itoa(f, c, 10);
strcat(c, " ");
drawCommandbar(c);
}
*/
if(!readTouch())
continue;
scaleTouch(&ts_point);
int total = sizeof(btn_set)/sizeof(struct Button);
for (int i = 0; i < MAX_KEYS; i++){
struct Button b;
memcpy_P(&b, keypad + i, sizeof(struct Button));
int x2 = b.x + b.w;
int y2 = b.y + b.h;
if (b.x < ts_point.x && ts_point.x < x2 &&
b.y < ts_point.y && ts_point.y < y2){
if (!strcmp(b.text, "OK")){
long f = atol(c);
if(30000 >= f && f > 100){
frequency = f * 1000l;
setFrequency(frequency);
if (vfoActive == VFO_A)
vfoA = frequency;
else
vfoB = frequency;
saveVFOs();
}
guiUpdate();
return;
}
else if (!strcmp(b.text, "<-")){
c[cursor_pos] = 0;
if (cursor_pos > 0)
cursor_pos--;
}
else if (!strcmp(b.text, "Can")){
guiUpdate();
return;
}
else if('0' <= b.text[0] && b.text[0] <= '9'){
c[cursor_pos++] = b.text[0];
c[cursor_pos] = 0;
}
}
} // end of the button scanning loop
displayText(c, 0, 40, 320, 40, ILI9341_WHITE, ILI9341_NAVY, ILI9341_NAVY);
delay(300);
while(readTouch())
checkCAT();
} // end of event loop : while(1)
}
void drawCWStatus(){
utftFillrect(0, 201, 320, 39, ILI9341_NAVY);
strcpy(b, " cw:");
int wpm = 1200/cwSpeed;
itoa(wpm,c, 10);
strcat(b, c);
strcat(b, "wpm, ");
itoa(sideTone, c, 10);
strcat(b, c);
strcat(b, "hz");
displayRawText(b, 0, 201, ILI9341_CYAN, ILI9341_NAVY);
}
void drawTx(){
if (inTx)
displayText("TX", 280, 48, 37, 28, ILI9341_BLACK, ILI9341_ORANGE, ILI9341_BLUE);
else
utftFillrect(280, 48, 37, 28, ILI9341_NAVY);
}
void drawStatusbar(){
drawCWStatus();
}
void guiUpdate(){
/*
if (doingCAT)
return;
*/
// use the current frequency as the VFO frequency for the active VFO
displayClear(ILI9341_NAVY);
memset(vfoDisplay, 0, 12);
displayVFO(VFO_A);
checkCAT();
memset(vfoDisplay, 0, 12);
displayVFO(VFO_B);
checkCAT();
displayRIT();
checkCAT();
//force the display to refresh everything
//display all the buttons
for (int i = 0; i < MAX_BUTTONS; i++){
struct Button b;
memcpy_P(&b, btn_set + i, sizeof(struct Button));
btnDraw(&b);
checkCAT();
}
drawStatusbar();
checkCAT();
}
/*
* This formats the frequency given in f
*/
void formatFreq(long f, char *buff) {
// tks Jack Purdum W8TEE
// replaced fsprint commmands by str commands for code size reduction
memset(buff, 0, 10);
memset(b, 0, sizeof(b));
ultoa(f, b, DEC);
//one mhz digit if less than 10 M, two digits if more
if (f < 10000000l){
buff[0] = ' ';
strncat(buff, b, 4);
strcat(buff, ".");
strncat(buff, &b[4], 2);
}
else {
strncat(buff, b, 5);
strcat(buff, ".");
strncat(buff, &b[5], 2);
}
}
// this builds up the top line of the display with frequency and mode
void updateDisplay() {
displayVFO(vfoActive);
}
int enc_prev_state = 3;
/**
* The A7 And A6 are purely analog lines on the Arduino Nano
* These need to be pulled up externally using two 10 K resistors
*
* There are excellent pages on the Internet about how these encoders work
* and how they should be used. We have elected to use the simplest way
* to use these encoders without the complexity of interrupts etc to
* keep it understandable.
*
* The enc_state returns a two-bit number such that each bit reflects the current
* value of each of the two phases of the encoder
*
* The enc_read returns the number of net pulses counted over 50 msecs.
* If the puluses are -ve, they were anti-clockwise, if they are +ve, the
* were in the clockwise directions. Higher the pulses, greater the speed
* at which the enccoder was spun
*/
byte enc_state (void) {
//Serial.print(digitalRead(ENC_A)); Serial.print(":");Serial.println(digitalRead(ENC_B));
return (digitalRead(ENC_A) == 1 ? 1 : 0) + (digitalRead(ENC_B) == 1 ? 2: 0);
}
int enc_read(void) {
int result = 0;
byte newState;
int enc_speed = 0;
long stop_by = millis() + 200;
while (millis() < stop_by) { // check if the previous state was stable
newState = enc_state(); // Get current state
// if (newState != enc_prev_state)
// active_delay(20);
if (enc_state() != newState || newState == enc_prev_state)
continue;
//these transitions point to the encoder being rotated anti-clockwise
if ((enc_prev_state == 0 && newState == 2) ||
(enc_prev_state == 2 && newState == 3) ||
(enc_prev_state == 3 && newState == 1) ||
(enc_prev_state == 1 && newState == 0)){
result--;
}
//these transitions point o the enccoder being rotated clockwise
if ((enc_prev_state == 0 && newState == 1) ||
(enc_prev_state == 1 && newState == 3) ||
(enc_prev_state == 3 && newState == 2) ||
(enc_prev_state == 2 && newState == 0)){
result++;
}
enc_prev_state = newState; // Record state for next pulse interpretation
enc_speed++;
active_delay(1);
}
//if (result)
// Serial.println(result);
return(result);
}
void vfoReset(){
Button b;
if (vfoActive = VFO_A)
vfoB = vfoA;
else
vfoA = vfoB;
if (splitOn){
getButton("SPL", &b);
splitToggle(&b);
}
if (ritOn){
getButton("RIT", &b);
ritToggle(&b);
}
memset(vfoDisplay, 0, sizeof(vfoDisplay));
displayVFO(VFO_A);
memset(vfoDisplay, 0, sizeof(vfoDisplay));
displayVFO(VFO_B);
saveVFOs();
}
void ritToggle(struct Button *b){
if (ritOn == 0){
ritEnable(frequency);
}
else
ritDisable();
btnDraw(b);
displayRIT();
}
void cwToggle(struct Button *b){
if (cwMode == 0){
cwMode = 1;
}
else
cwMode = 0;
setFrequency(frequency);
btnDraw(b);
}
void sidebandToggle(struct Button *b){
if (!strcmp(b->text, "LSB"))
isUSB = 0;
else
isUSB = 1;
struct Button e;
getButton("USB", &e);
btnDraw(&e);
getButton("LSB", &e);
btnDraw(&e);
saveVFOs();
}
void splitToggle(struct Button *b){
if (splitOn)
splitOn = 0;
else
splitOn = 1;
btnDraw(b);
//disable rit as well
ritDisable();
struct Button b2;
getButton("RIT", &b2);
btnDraw(&b2);
displayRIT();
memset(vfoDisplay, 0, sizeof(vfoDisplay));
displayVFO(VFO_A);
memset(vfoDisplay, 0, sizeof(vfoDisplay));
displayVFO(VFO_B);
}
void switchVFO(int vfoSelect){
if (vfoSelect == VFO_A){
if (vfoActive == VFO_B){
vfoB = frequency;
isUsbVfoB = isUSB;
EEPROM.put(VFO_B, frequency);
if (isUsbVfoB)
EEPROM.put(VFO_B_MODE, VFO_MODE_USB);
else
EEPROM.put(VFO_B_MODE, VFO_MODE_LSB);
}
vfoActive = VFO_A;
// printLine2("Selected VFO A ");
frequency = vfoA;
isUSB = isUsbVfoA;
}
else {
if (vfoActive == VFO_A){
vfoA = frequency;
isUsbVfoA = isUSB;
EEPROM.put(VFO_A, frequency);
if (isUsbVfoA)
EEPROM.put(VFO_A_MODE, VFO_MODE_USB);
else
EEPROM.put(VFO_A_MODE, VFO_MODE_LSB);
}
vfoActive = VFO_B;
// printLine2("Selected VFO B ");
frequency = vfoB;
isUSB = isUsbVfoB;
}
setFrequency(frequency);
struct Button b;
ritDisable();
getButton("RIT", &b);
btnDraw(&b);
displayRIT();
memset(vfoDisplay, 0, sizeof(vfoDisplay));
displayVFO(VFO_A);
memset(vfoDisplay, 0, sizeof(vfoDisplay));
displayVFO(VFO_B);
saveVFOs();
//draw the lsb/usb buttons, the sidebands might have changed
getButton("LSB", &b);
btnDraw(&b);
getButton("USB", &b);
btnDraw(&b);
}
void switchBand(long bandfreq){
long offset;
// Serial.println(frequency);
// Serial.println(bandfreq);
if (3500000l <= frequency && frequency <= 4000000l)
offset = frequency - 3500000l;
else if (24800000l <= frequency && frequency <= 25000000l)
offset = frequency - 24800000l;
else
offset = frequency % 1000000l;
// Serial.println(offset);
setFrequency(bandfreq + offset);
updateDisplay();
saveVFOs();
}
int setCwSpeed(){
int knob = 0;
int wpm;
wpm = 1200/cwSpeed;
wpm = getValueByKnob(1, 100, 1, wpm, "CW: ", " WPM");
cwSpeed = 1200/wpm;
EEPROM.put(CW_SPEED, cwSpeed);
active_delay(500);
drawStatusbar();
// printLine2("");
// updateDisplay();
}
void setCwTone(){
int knob = 0;
int prev_sideTone;
tone(CW_TONE, sideTone);
//disable all clock 1 and clock 2
while (digitalRead(PTT) == HIGH && !btnDown())
{
knob = enc_read();
if (knob > 0 && sideTone < 2000)
sideTone += 10;
else if (knob < 0 && sideTone > 100 )
sideTone -= 10;
else
continue; //don't update the frequency or the display
tone(CW_TONE, sideTone);
itoa(sideTone, c, 10);
strcpy(b, "CW Tone: ");
strcat(b, c);
strcat(b, " Hz");
drawCommandbar(b);
//printLine2(b);
checkCAT();
active_delay(20);
}
noTone(CW_TONE);
//save the setting
EEPROM.put(CW_SIDETONE, sideTone);
utftFillrect(30,41,280, 32, ILI9341_NAVY);
drawStatusbar();
// printLine2("");
// updateDisplay();
}
void doCommand(struct Button *b){
if (!strcmp(b->text, "RIT"))
ritToggle(b);
else if (!strcmp(b->text, "LSB"))
sidebandToggle(b);
else if (!strcmp(b->text, "USB"))
sidebandToggle(b);
else if (!strcmp(b->text, "CW"))
cwToggle(b);
else if (!strcmp(b->text, "SPL"))
splitToggle(b);
else if (!strcmp(b->text, "VFOA")){
if (vfoActive == VFO_A)
fastTune();
else
switchVFO(VFO_A);
}
else if (!strcmp(b->text, "VFOB")){
if (vfoActive == VFO_B)
fastTune();
else
switchVFO(VFO_B);
}
else if (!strcmp(b->text, "A=B"))
vfoReset();
else if (!strcmp(b->text, "80"))
switchBand(3500000l);
else if (!strcmp(b->text, "40"))
switchBand(7000000l);
else if (!strcmp(b->text, "30"))
switchBand(10000000l);
else if (!strcmp(b->text, "20"))
switchBand(14000000l);
else if (!strcmp(b->text, "18"))
switchBand(18000000l);
else if (!strcmp(b->text, "15"))
switchBand(21000000l);
else if (!strcmp(b->text, "13"))
switchBand(24800000l);
else if (!strcmp(b->text, "10"))
switchBand(28000000l);
else if (!strcmp(b->text, "FRQ"))
enterFreq();
else if (!strcmp(b->text, "WPM"))
setCwSpeed();
else if (!strcmp(b->text, "TON"))
setCwTone();
}
void checkTouch(){
if (!readTouch())
return;
while(readTouch())
checkCAT();
scaleTouch(&ts_point);
/* //debug code
Serial.print(ts_point.x); Serial.print(' ');Serial.println(ts_point.y);
*/
int total = sizeof(btn_set)/sizeof(struct Button);
for (int i = 0; i < MAX_BUTTONS; i++){
struct Button b;
memcpy_P(&b, btn_set + i, sizeof(struct Button));
int x2 = b.x + b.w;
int y2 = b.y + b.h;
if (b.x < ts_point.x && ts_point.x < x2 &&
b.y < ts_point.y && ts_point.y < y2)
doCommand(&b);
}
}
//returns true if the button is pressed
int btnDown(){
if (digitalRead(FBUTTON) == HIGH)
return 0;
else
return 1;
}
void drawFocus(int ibtn, int color){
struct Button b;
memcpy_P(&b, btn_set + ibtn, sizeof(struct Button));
utftRect(b.x, b.y, b.w, b.h, color);
}
void doMenu2(){
int select=0, i, prevButton, btnState;
//wait for the button to be raised up
while(btnDown())
active_delay(50);
active_delay(50); //debounce
menuOn = 2;
while (menuOn){
//check if the knob's button was pressed
btnState = btnDown();
if (btnState){
struct Button b;
memcpy_P(&b, btn_set + select/10, sizeof(struct Button));
doCommand(&b);
//unfocus the buttons
drawFocus(select, ILI9341_BLUE);
if (vfoActive == VFO_A)
drawFocus(0, ILI9341_WHITE);
else
drawFocus(1, ILI9341_WHITE);
//wait for the button to be up and debounce
while(btnDown())
active_delay(100);
active_delay(500);
return;
}
i = enc_read();
if (i == 0){
active_delay(50);
continue;
}
if (i > 0){
if (select + i < MAX_BUTTONS * 10)
select += i;
}
if (i < 0 && select + i >= 0)
select += i; //caught ya, i is already -ve here, so you add it
if (prevButton == select / 10)
continue;
//we are on a new button
drawFocus(prevButton, ILI9341_BLUE);
drawFocus(select/10, ILI9341_WHITE);
prevButton = select/10;
}
// guiUpdate();
//debounce the button
while(btnDown())
active_delay(50);
active_delay(50);
checkCAT();
}

807
ubitx_v6.3_code.ino Normal file
View File

@ -0,0 +1,807 @@
/**
* This source file is under General Public License version 3.
*
* This verision uses a built-in Si5351 library
* Most source code are meant to be understood by the compilers and the computers.
* Code that has to be hackable needs to be well understood and properly documented.
* Donald Knuth coined the term Literate Programming to indicate code that is written be
* easily read and understood.
*
* The Raduino is a small board that includes the Arduin Nano, a TFT display and
* an Si5351a frequency synthesizer. This board is manufactured by HF Signals Electronics Pvt Ltd
*
* To learn more about Arduino you may visit www.arduino.cc.
*
* The Arduino works by starts executing the code in a function called setup() and then it
* repeatedly keeps calling loop() forever. All the initialization code is kept in setup()
* and code to continuously sense the tuning knob, the function button, transmit/receive,
* etc is all in the loop() function. If you wish to study the code top down, then scroll
* to the bottom of this file and read your way up.
*
* Below are the libraries to be included for building the Raduino
* The EEPROM library is used to store settings like the frequency memory, caliberation data, etc.
*
* The main chip which generates upto three oscillators of various frequencies in the
* Raduino is the Si5351a. To learn more about Si5351a you can download the datasheet
* from www.silabs.com although, strictly speaking it is not a requirment to understand this code.
* Instead, you can look up the Si5351 library written by xxx, yyy. You can download and
* install it from www.url.com to complile this file.
* The Wire.h library is used to talk to the Si5351 and we also declare an instance of
* Si5351 object to control the clocks.
*/
#include <Wire.h>
#include <EEPROM.h>
/**
The main chip which generates upto three oscillators of various frequencies in the
Raduino is the Si5351a. To learn more about Si5351a you can download the datasheet
from www.silabs.com although, strictly speaking it is not a requirment to understand this code.
We no longer use the standard SI5351 library because of its huge overhead due to many unused
features consuming a lot of program space. Instead of depending on an external library we now use
Jerry Gaffke's, KE7ER, lightweight standalone mimimalist "si5351bx" routines (see further down the
code). Here are some defines and declarations used by Jerry's routines:
*/
/**
* We need to carefully pick assignment of pin for various purposes.
* There are two sets of completely programmable pins on the Raduino.
* First, on the top of the board, in line with the LCD connector is an 8-pin connector
* that is largely meant for analog inputs and front-panel control. It has a regulated 5v output,
* ground and six pins. Each of these six pins can be individually programmed
* either as an analog input, a digital input or a digital output.
* The pins are assigned as follows (left to right, display facing you):
* Pin 1 (Violet), A7, SPARE
* Pin 2 (Blue), A6, KEYER (DATA)
* Pin 3 (Green), +5v
* Pin 4 (Yellow), Gnd
* Pin 5 (Orange), A3, PTT
* Pin 6 (Red), A2, F BUTTON
* Pin 7 (Brown), A1, ENC B
* Pin 8 (Black), A0, ENC A
*Note: A5, A4 are wired to the Si5351 as I2C interface
* *
* Though, this can be assigned anyway, for this application of the Arduino, we will make the following
* assignment
* A2 will connect to the PTT line, which is the usually a part of the mic connector
* A3 is connected to a push button that can momentarily ground this line. This will be used for RIT/Bandswitching, etc.
* A6 is to implement a keyer, it is reserved and not yet implemented
* A7 is connected to a center pin of good quality 100K or 10K linear potentiometer with the two other ends connected to
* ground and +5v lines available on the connector. This implments the tuning mechanism
*/
#define ENC_A (A0)
#define ENC_B (A1)
#define FBUTTON (A2)
#define PTT (A3)
#define ANALOG_KEYER (A6)
#define ANALOG_SPARE (A7)
#include "Adafruit_GFX.h"
//#include "Adafruit_ILI9341.h"
#include "ubitx_font2.h"
#include <XPT2046_Touchscreen.h>
#include <SPI.h>
/** pin assignments
14 T_IRQ 2 std changed
13 T_DOUT (parallel to SOD/MOSI, pin 9 of display)
12 T_DIN (parallel to SDI/MISO, pin 6 of display)
11 T_CS 9 (we need to specify this)
10 T_CLK (parallel to SCK, pin 7 of display)
9 SDO(MSIO) 12 12 (spi)
8 LED A0 8 (not needed, permanently on +3.3v) (resistor from 5v,
7 SCK 13 13 (spi)
6 SDI 11 11 (spi)
5 D/C A3 7 (changable)
4 RESET A4 9 (not needed, permanently +5v)
3 CS A5 10 (changable)
2 GND GND
1 VCC VCC
The model is called tjctm24028-spi
it uses an ILI9341 display controller and an XPT2046 touch controller.
*/
#define TFT_DC 9
#define TFT_CS 10
//#define TIRQ_PIN 2
#define CS_PIN 8
// MOSI=11, MISO=12, SCK=13
//XPT2046_Touchscreen ts(CS_PIN);
//Adafruit_ILI9341 tft = Adafruit_ILI9341(TFT_CS, TFT_DC);
/**
* The Arduino, unlike C/C++ on a regular computer with gigabytes of RAM, has very little memory.
* We have to be very careful with variables that are declared inside the functions as they are
* created in a memory region called the stack. The stack has just a few bytes of space on the Arduino
* if you declare large strings inside functions, they can easily exceed the capacity of the stack
* and mess up your programs.
* We circumvent this by declaring a few global buffers as kitchen counters where we can
* slice and dice our strings. These strings are mostly used to control the display or handle
* the input and output from the USB port. We must keep a count of the bytes used while reading
* the serial port as we can easily run out of buffer space. This is done in the serial_in_count variable.
*/
char c[30], b[30];
char printBuff[2][20]; //mirrors what is showing on the two lines of the display
int count = 0; //to generally count ticks, loops, etc
/**
* The second set of 16 pins on the Raduino's bottom connector are have the three clock outputs and the digital lines to control the rig.
* This assignment is as follows :
* Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* GND +5V CLK0 GND GND CLK1 GND GND CLK2 GND D2 D3 D4 D5 D6 D7
* These too are flexible with what you may do with them, for the Raduino, we use them to :
* - TX_RX line : Switches between Transmit and Receive after sensing the PTT or the morse keyer
* - CW_KEY line : turns on the carrier for CW
*/
#define TX_RX (7)
#define CW_TONE (6)
#define TX_LPF_A (5)
#define TX_LPF_B (4)
#define TX_LPF_C (3)
#define CW_KEY (2)
/**
* These are the indices where these user changable settinngs are stored in the EEPROM
*/
#define MASTER_CAL 0
#define LSB_CAL 4
#define USB_CAL 8
#define SIDE_TONE 12
//these are ids of the vfos as well as their offset into the eeprom storage, don't change these 'magic' values
#define VFO_A 16
#define VFO_B 20
#define CW_SIDETONE 24
#define CW_SPEED 28
// the screen calibration parameters : int slope_x=104, slope_y=137, offset_x=28, offset_y=29;
#define SLOPE_X 32
#define SLOPE_Y 36
#define OFFSET_X 40
#define OFFSET_Y 44
#define CW_DELAYTIME 48
//These are defines for the new features back-ported from KD8CEC's software
//these start from beyond 256 as Ian, KD8CEC has kept the first 256 bytes free for the base version
#define VFO_A_MODE 256 // 2: LSB, 3: USB
#define VFO_B_MODE 257
//values that are stroed for the VFO modes
#define VFO_MODE_LSB 2
#define VFO_MODE_USB 3
// handkey, iambic a, iambic b : 0,1,2f
#define CW_KEY_TYPE 358
/**
* The uBITX is an upconnversion transceiver. The first IF is at 45 MHz.
* The first IF frequency is not exactly at 45 Mhz but about 5 khz lower,
* this shift is due to the loading on the 45 Mhz crystal filter by the matching
* L-network used on it's either sides.
* The first oscillator works between 48 Mhz and 75 MHz. The signal is subtracted
* from the first oscillator to arriive at 45 Mhz IF. Thus, it is inverted : LSB becomes USB
* and USB becomes LSB.
* The second IF of 12 Mhz has a ladder crystal filter. If a second oscillator is used at
* 57 Mhz, the signal is subtracted FROM the oscillator, inverting a second time, and arrives
* at the 12 Mhz ladder filter thus doouble inversion, keeps the sidebands as they originally were.
* If the second oscillator is at 33 Mhz, the oscilaltor is subtracated from the signal,
* thus keeping the signal's sidebands inverted. The USB will become LSB.
* We use this technique to switch sidebands. This is to avoid placing the lsbCarrier close to
* 12 MHz where its fifth harmonic beats with the arduino's 16 Mhz oscillator's fourth harmonic
*/
#define INIT_USB_FREQ (11059200l)
// limits the tuning and working range of the ubitx between 3 MHz and 30 MHz
#define LOWEST_FREQ (100000l)
#define HIGHEST_FREQ (30000000l)
//we directly generate the CW by programmin the Si5351 to the cw tx frequency, hence, both are different modes
//these are the parameter passed to startTx
#define TX_SSB 0
#define TX_CW 1
char ritOn = 0;
char vfoActive = VFO_A;
int8_t meter_reading = 0; // a -1 on meter makes it invisible
unsigned long vfoA=7150000L, vfoB=14200000L, sideTone=800, usbCarrier;
char isUsbVfoA=0, isUsbVfoB=1;
unsigned long frequency, ritRxFrequency, ritTxFrequency; //frequency is the current frequency on the dial
unsigned long firstIF = 45005000L;
// if cwMode is flipped on, the rx frequency is tuned down by sidetone hz instead of being zerobeat
int cwMode = 0;
//these are variables that control the keyer behaviour
int cwSpeed = 100; //this is actuall the dot period in milliseconds
extern int32_t calibration;
int cwDelayTime = 60;
bool Iambic_Key = true;
#define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
unsigned char keyerControl = IAMBICB;
//during CAT commands, we will freeeze the display until CAT is disengaged
unsigned char doingCAT = 0;
/**
* Raduino needs to keep track of current state of the transceiver. These are a few variables that do it
*/
boolean txCAT = false; //turned on if the transmitting due to a CAT command
char inTx = 0; //it is set to 1 if in transmit mode (whatever the reason : cw, ptt or cat)
int splitOn = 0; //working split, uses VFO B as the transmit frequency
char keyDown = 0; //in cw mode, denotes the carrier is being transmitted
char isUSB = 0; //upper sideband was selected, this is reset to the default for the
//frequency when it crosses the frequency border of 10 MHz
byte menuOn = 0; //set to 1 when the menu is being displayed, if a menu item sets it to zero, the menu is exited
unsigned long cwTimeout = 0; //milliseconds to go before the cw transmit line is released and the radio goes back to rx mode
unsigned long dbgCount = 0; //not used now
unsigned char txFilter = 0; //which of the four transmit filters are in use
boolean modeCalibrate = false;//this mode of menus shows extended menus to calibrate the oscillators and choose the proper
//beat frequency
/**
* Below are the basic functions that control the uBitx. Understanding the functions before
* you start hacking around
*/
/**
* Our own delay. During any delay, the raduino should still be processing a few times.
*/
void active_delay(int delay_by){
unsigned long timeStart = millis();
while (millis() - timeStart <= (unsigned long)delay_by) {
delay(10);
//Background Work
checkCAT();
}
}
void saveVFOs(){
if (vfoActive == VFO_A)
EEPROM.put(VFO_A, frequency);
else
EEPROM.put(VFO_A, vfoA);
if (isUsbVfoA)
EEPROM.put(VFO_A_MODE, VFO_MODE_USB);
else
EEPROM.put(VFO_A_MODE, VFO_MODE_LSB);
if (vfoActive == VFO_B)
EEPROM.put(VFO_B, frequency);
else
EEPROM.put(VFO_B, vfoB);
if (isUsbVfoB)
EEPROM.put(VFO_B_MODE, VFO_MODE_USB);
else
EEPROM.put(VFO_B_MODE, VFO_MODE_LSB);
}
/**
* Select the properly tx harmonic filters
* The four harmonic filters use only three relays
* the four LPFs cover 30-21 Mhz, 18 - 14 Mhz, 7-10 MHz and 3.5 to 5 Mhz
* Briefly, it works like this,
* - When KT1 is OFF, the 'off' position routes the PA output through the 30 MHz LPF
* - When KT1 is ON, it routes the PA output to KT2. Which is why you will see that
* the KT1 is on for the three other cases.
* - When the KT1 is ON and KT2 is off, the off position of KT2 routes the PA output
* to 18 MHz LPF (That also works for 14 Mhz)
* - When KT1 is On, KT2 is On, it routes the PA output to KT3
* - KT3, when switched on selects the 7-10 Mhz filter
* - KT3 when switched off selects the 3.5-5 Mhz filter
* See the circuit to understand this
*/
void setTXFilters(unsigned long freq){
if (freq > 21000000L){ // the default filter is with 35 MHz cut-off
digitalWrite(TX_LPF_A, 0);
digitalWrite(TX_LPF_B, 0);
digitalWrite(TX_LPF_C, 0);
}
else if (freq >= 14000000L){ //thrown the KT1 relay on, the 30 MHz LPF is bypassed and the 14-18 MHz LPF is allowd to go through
digitalWrite(TX_LPF_A, 1);
digitalWrite(TX_LPF_B, 0);
digitalWrite(TX_LPF_C, 0);
}
else if (freq > 7000000L){
digitalWrite(TX_LPF_A, 0);
digitalWrite(TX_LPF_B, 1);
digitalWrite(TX_LPF_C, 0);
}
else {
digitalWrite(TX_LPF_A, 0);
digitalWrite(TX_LPF_B, 0);
digitalWrite(TX_LPF_C, 1);
}
}
void setTXFilters_v5(unsigned long freq){
if (freq > 21000000L){ // the default filter is with 35 MHz cut-off
digitalWrite(TX_LPF_A, 0);
digitalWrite(TX_LPF_B, 0);
digitalWrite(TX_LPF_C, 0);
}
else if (freq >= 14000000L){ //thrown the KT1 relay on, the 30 MHz LPF is bypassed and the 14-18 MHz LPF is allowd to go through
digitalWrite(TX_LPF_A, 1);
digitalWrite(TX_LPF_B, 0);
digitalWrite(TX_LPF_C, 0);
}
else if (freq > 7000000L){
digitalWrite(TX_LPF_A, 0);
digitalWrite(TX_LPF_B, 1);
digitalWrite(TX_LPF_C, 0);
}
else {
digitalWrite(TX_LPF_A, 0);
digitalWrite(TX_LPF_B, 0);
digitalWrite(TX_LPF_C, 1);
}
}
/**
* This is the most frequently called function that configures the
* radio to a particular frequeny, sideband and sets up the transmit filters
*
* The transmit filter relays are powered up only during the tx so they dont
* draw any current during rx.
*
* The carrier oscillator of the detector/modulator is permanently fixed at
* uppper sideband. The sideband selection is done by placing the second oscillator
* either 12 Mhz below or above the 45 Mhz signal thereby inverting the sidebands
* through mixing of the second local oscillator.
*/
void setFrequency(unsigned long f){
uint64_t osc_f, firstOscillator, secondOscillator;
setTXFilters(f);
/*
if (isUSB){
si5351bx_setfreq(2, firstIF + f);
si5351bx_setfreq(1, firstIF + usbCarrier);
}
else{
si5351bx_setfreq(2, firstIF + f);
si5351bx_setfreq(1, firstIF - usbCarrier);
}
*/
//alternative to reduce the intermod spur
if (isUSB){
if (cwMode)
si5351bx_setfreq(2, firstIF + f + sideTone);
else
si5351bx_setfreq(2, firstIF + f);
si5351bx_setfreq(1, firstIF + usbCarrier);
}
else{
if (cwMode)
si5351bx_setfreq(2, firstIF + f + sideTone);
else
si5351bx_setfreq(2, firstIF + f);
si5351bx_setfreq(1, firstIF - usbCarrier);
}
frequency = f;
}
/**
* startTx is called by the PTT, cw keyer and CAT protocol to
* put the uBitx in tx mode. It takes care of rit settings, sideband settings
* Note: In cw mode, doesnt key the radio, only puts it in tx mode
* CW offest is calculated as lower than the operating frequency when in LSB mode, and vice versa in USB mode
*/
void startTx(byte txMode){
unsigned long tx_freq = 0;
digitalWrite(TX_RX, 1);
inTx = 1;
if (ritOn){
//save the current as the rx frequency
ritRxFrequency = frequency;
setFrequency(ritTxFrequency);
}
else
{
if (splitOn == 1) {
if (vfoActive == VFO_B) {
vfoActive = VFO_A;
isUSB = isUsbVfoA;
frequency = vfoA;
}
else if (vfoActive == VFO_A){
vfoActive = VFO_B;
frequency = vfoB;
isUSB = isUsbVfoB;
}
}
setFrequency(frequency);
}
if (txMode == TX_CW){
digitalWrite(TX_RX, 0);
//turn off the second local oscillator and the bfo
si5351bx_setfreq(0, 0);
si5351bx_setfreq(1, 0);
//shif the first oscillator to the tx frequency directly
//the key up and key down will toggle the carrier unbalancing
//the exact cw frequency is the tuned frequency + sidetone
if (isUSB)
si5351bx_setfreq(2, frequency + sideTone);
else
si5351bx_setfreq(2, frequency - sideTone);
delay(20);
digitalWrite(TX_RX, 1);
}
drawTx();
//updateDisplay();
}
void stopTx(){
inTx = 0;
digitalWrite(TX_RX, 0); //turn off the tx
si5351bx_setfreq(0, usbCarrier); //set back the cardrier oscillator anyway, cw tx switches it off
if (ritOn)
setFrequency(ritRxFrequency);
else{
if (splitOn == 1) {
//vfo Change
if (vfoActive == VFO_B){
vfoActive = VFO_A;
frequency = vfoA;
isUSB = isUsbVfoA;
}
else if (vfoActive == VFO_A){
vfoActive = VFO_B;
frequency = vfoB;
isUSB = isUsbVfoB;
}
}
setFrequency(frequency);
}
//updateDisplay();
drawTx();
}
/**
* ritEnable is called with a frequency parameter that determines
* what the tx frequency will be
*/
void ritEnable(unsigned long f){
ritOn = 1;
//save the non-rit frequency back into the VFO memory
//as RIT is a temporary shift, this is not saved to EEPROM
ritTxFrequency = f;
}
// this is called by the RIT menu routine
void ritDisable(){
if (ritOn){
ritOn = 0;
setFrequency(ritTxFrequency);
updateDisplay();
}
}
/**
* Basic User Interface Routines. These check the front panel for any activity
*/
/**
* The PTT is checked only if we are not already in a cw transmit session
* If the PTT is pressed, we shift to the ritbase if the rit was on
* flip the T/R line to T and update the display to denote transmission
*/
void checkPTT(){
//we don't check for ptt when transmitting cw
if (cwTimeout > 0)
return;
if (digitalRead(PTT) == 0 && inTx == 0){
startTx(TX_SSB);
active_delay(50); //debounce the PTT
}
if (digitalRead(PTT) == 1 && inTx == 1)
stopTx();
}
void checkButton(){
int i, t1, t2, knob, new_knob;
//only if the button is pressed
if (!btnDown())
return;
active_delay(50);
if (!btnDown()) //debounce
return;
//disengage any CAT work
doingCAT = 0;
int downTime = 0;
while(btnDown()){
active_delay(10);
downTime++;
if (downTime > 300){
doSetup2();
return;
}
}
active_delay(100);
doMenu2();
//wait for the button to go up again
while(btnDown())
active_delay(10);
active_delay(50);//debounce
}
/**
* The tuning jumps by 50 Hz on each step when you tune slowly
* As you spin the encoder faster, the jump size also increases
* This way, you can quickly move to another band by just spinning the
* tuning knob
*/
void doTuning(){
int s;
static unsigned long prev_freq;
static unsigned long nextFrequencyUpdate = 0;
unsigned long now = millis();
if (now >= nextFrequencyUpdate && prev_freq != frequency){
updateDisplay();
nextFrequencyUpdate = now + 500;
prev_freq = frequency;
}
s = enc_read();
if (!s)
return;
doingCAT = 0; // go back to manual mode if you were doing CAT
prev_freq = frequency;
if (s > 10)
frequency += 200l * s;
else if (s > 5)
frequency += 100l * s;
else if (s > 0)
frequency += 50l * s;
else if (s < -10)
frequency += 200l * s;
else if (s < -5)
frequency += 100l * s;
else if (s < 0)
frequency += 50l * s;
if (prev_freq < 10000000l && frequency > 10000000l)
isUSB = true;
if (prev_freq > 10000000l && frequency < 10000000l)
isUSB = false;
setFrequency(frequency);
}
/**
* RIT only steps back and forth by 100 hz at a time
*/
void doRIT(){
unsigned long newFreq;
int knob = enc_read();
unsigned long old_freq = frequency;
if (knob < 0)
frequency -= 100l;
else if (knob > 0)
frequency += 100;
if (old_freq != frequency){
setFrequency(frequency);
updateDisplay();
}
}
/**
* The settings are read from EEPROM. The first time around, the values may not be
* present or out of range, in this case, some intelligent defaults are copied into the
* variables.
*/
void initSettings(){
byte x;
//read the settings from the eeprom and restore them
//if the readings are off, then set defaults
EEPROM.get(MASTER_CAL, calibration);
EEPROM.get(USB_CAL, usbCarrier);
EEPROM.get(VFO_A, vfoA);
EEPROM.get(VFO_B, vfoB);
EEPROM.get(CW_SIDETONE, sideTone);
EEPROM.get(CW_SPEED, cwSpeed);
EEPROM.get(CW_DELAYTIME, cwDelayTime);
// the screen calibration parameters : int slope_x=104, slope_y=137, offset_x=28, offset_y=29;
if (usbCarrier > 11060000l || usbCarrier < 11048000l)
usbCarrier = 11052000l;
if (vfoA > 35000000l || 3500000l > vfoA)
vfoA = 7150000l;
if (vfoB > 35000000l || 3500000l > vfoB)
vfoB = 14150000l;
if (sideTone < 100 || 2000 < sideTone)
sideTone = 800;
if (cwSpeed < 10 || 1000 < cwSpeed)
cwSpeed = 100;
if (cwDelayTime < 10 || cwDelayTime > 100)
cwDelayTime = 50;
/*
* The VFO modes are read in as either 2 (USB) or 3(LSB), 0, the default
* is taken as 'uninitialized
*/
EEPROM.get(VFO_A_MODE, x);
switch(x){
case VFO_MODE_USB:
isUsbVfoA = 1;
break;
case VFO_MODE_LSB:
isUsbVfoA = 0;
break;
default:
if (vfoA > 10000000l)
isUsbVfoA = 1;
else
isUsbVfoA = 0;
}
EEPROM.get(VFO_B_MODE, x);
switch(x){
case VFO_MODE_USB:
isUsbVfoB = 1;
break;
case VFO_MODE_LSB:
isUsbVfoB = 0;
break;
default:
if (vfoA > 10000000l)
isUsbVfoB = 1;
else
isUsbVfoB = 0;
}
//set the current mode
isUSB = isUsbVfoA;
/*
* The keyer type splits into two variables
*/
EEPROM.get(CW_KEY_TYPE, x);
if (x == 0)
Iambic_Key = false;
else if (x == 1){
Iambic_Key = true;
keyerControl &= ~IAMBICB;
}
else if (x == 2){
Iambic_Key = true;
keyerControl |= IAMBICB;
}
}
void initPorts(){
analogReference(DEFAULT);
//??
pinMode(ENC_A, INPUT_PULLUP);
pinMode(ENC_B, INPUT_PULLUP);
pinMode(FBUTTON, INPUT_PULLUP);
//configure the function button to use the external pull-up
// pinMode(FBUTTON, INPUT);
// digitalWrite(FBUTTON, HIGH);
pinMode(PTT, INPUT_PULLUP);
// pinMode(ANALOG_KEYER, INPUT_PULLUP);
pinMode(CW_TONE, OUTPUT);
digitalWrite(CW_TONE, 0);
pinMode(TX_RX,OUTPUT);
digitalWrite(TX_RX, 0);
pinMode(TX_LPF_A, OUTPUT);
pinMode(TX_LPF_B, OUTPUT);
pinMode(TX_LPF_C, OUTPUT);
digitalWrite(TX_LPF_A, 0);
digitalWrite(TX_LPF_B, 0);
digitalWrite(TX_LPF_C, 0);
pinMode(CW_KEY, OUTPUT);
digitalWrite(CW_KEY, 0);
}
void setup()
{
Serial.begin(38400);
Serial.flush();
displayInit();
initSettings();
initPorts();
initOscillators();
frequency = vfoA;
setFrequency(vfoA);
if (btnDown()){
isUSB = 1;
setFrequency(10000000l);
setupFreq();
isUSB = 0;
setFrequency(7100000l);
setupBFO();
}
guiUpdate();
}
/**
* The loop checks for keydown, ptt, function button and tuning.
*/
byte flasher = 0;
boolean wastouched = false;
void loop(){
if (cwMode)
cwKeyer();
else if (!txCAT)
checkPTT();
checkButton();
//tune only when not tranmsitting
if (!inTx){
if (ritOn)
doRIT();
else
doTuning();
checkTouch();
}
checkCAT();
}