mirror of
https://codeberg.org/mclemens/qrz.is.git
synced 2024-11-02 18:47:44 -04:00
59 lines
1.2 KiB
Markdown
59 lines
1.2 KiB
Markdown
---
|
|
title: "The AntennaPi"
|
|
author: micha
|
|
date: 2019-07-05T13:29:09+02:00
|
|
url: /the-antennapi/
|
|
---
|
|
|
|
## Parts needed
|
|
|
|
* Aluminium case
|
|
* Raspberry Pi 1 or newer
|
|
* relay module
|
|
* PL sockets
|
|
* screws, cables, etc.
|
|
* soldering equipment, drill, etc.
|
|
|
|
This is a remote antenna switch I use in my attic to connect transceivers
|
|
in the basement to multiple antennas in the attic. There is only one antenna
|
|
cable going up to the attic which is why an antenna switch is needed.
|
|
|
|
The goal of this project is to be able to remotely connect one of the
|
|
antennas in the attic to the only antenna cable available.
|
|
|
|
Since I only have two antennas in place at the moment, I only installed
|
|
two relays and only wired up two PL sockets. In the future I'll be able
|
|
to upgrade easily by adding a second module.
|
|
|
|
## Hardware
|
|
|
|
Drill the holes for the PL sockets:
|
|
|
|
![image][1]
|
|
|
|
Install the sockets:
|
|
|
|
![image][2]
|
|
|
|
Mount the relay module and use some antenna wire to connect the sockets with the relay module like this:
|
|
|
|
![image][3]
|
|
|
|
In the end it looks like this:
|
|
|
|
![image][4]
|
|
|
|
![image][5]
|
|
|
|
![image][6]
|
|
|
|
## Software
|
|
|
|
|
|
[1]: /img/antennapi01.jpg
|
|
[2]: /img/antennapi02.jpg
|
|
[3]: /img/antennapi03.jpg
|
|
[4]: /img/antennapi04.jpg
|
|
[5]: /img/antennapi05.jpg
|
|
[6]: /img/antennapi06.jpg
|