Commit Graph

1310 Commits

Author SHA1 Message Date
FRIGN
521f324319 Audit col(1), add UTF-8-support
Nothing special here, only renaming of variables and adding the
Rune-utility-functions.
Also, I refactored the manpage.
2015-03-22 21:45:32 +01:00
sin
a0e5b565a7 nl: Fix leading white-space 2015-03-22 19:23:57 +00:00
FRIGN
b96c9d06c5 Don't indent non-numbered lines in nl(1)
This is yet another GNU-specific behaviour we fell for.
POSIX explicitly states that for non-numbered lines, all indentation-
crap should be dropped immediately. Well, we didn't listen, so this
commit will set things straight again.
Honestly speaking, this also looks much cleaner than before.
Fuck GNU!
2015-03-22 18:30:45 +01:00
FRIGN
3ccfa1877d Don't print section-control-lines as empty lines in nl(1)
GNU coreutils may behave this way, but one can think of these lines
as consumed control lines.
Fuck GNU!
2015-03-22 17:38:22 +01:00
FRIGN
377b5499e9 Fix small typo in nl.1 2015-03-22 17:25:11 +01:00
FRIGN
587575dcb4 Audit nl(1)
1) Refactor the manpage to use the num-syntax and concise wording.
2) Build format instead of having a list of static strings.
3) BUGFIX: if (!buf[0] || buf[0] == '\n') Process last-read-line
           properly.
4) BUGFIX: In case we hit a formatting line, print a newline instead
           of just dropping it.
5) Use a switch instead of having spaghetti-cases.
6) Don't use printf-magic but explicitly do a putchar(' ')-loop.
7) Update usage(), indent properly.
8) BUGFIX: strchr is not NULL when type[0] is \0. Check for \0
           separately beforehand.
9) Reorder arg.h-cases for better readability.
2015-03-22 16:46:01 +01:00
FRIGN
d49f6f2044 Audit expr(1)
No bugs found, but I changed intmax_t to long long to make it more
predictable and removed some of the kitchen-sinking.
Don't return structs themselves, as this is not very elegant.
Do it like functions like stat(), which take a pointer to a
struct to fill.
2015-03-22 14:35:15 +01:00
FRIGN
1f0f1dd320 Show usage() when filtermode is given for tar-creation
We only allow decompression for extraction. Thus, it may be confusing
for the user and break scripts silently when the j- or z-flag are given
even though this is not supported.
2015-03-21 14:04:49 +01:00
FRIGN
b6b977f63d Audit tar(1), add DIRFIRST-flag to recurse()
I've been wanting to do this for a while now, as tar(1) used to
be one of messiest and cruftiest tools.
First off, before walking through the audit, I'll talk about
what the DIRFIRST-flag for recurse() does.
It basically calls fn() on the first-level-dir before calling
it's subentries. It's necessary here, because else the order
of the tar-files would've been wrong (it would try to create
dir/file before creating dir/).

Now, to the audit:
1)  Update manpage, fix mistake that compression is also available
    for compressing. It's only available for extracting.
2)  Define the major, minor and makedev macros from glibc by ourselves.
    No need to rely on them, as they are common sense.

decomp()
3)  Simple refactorization.

putoctal()
4)  Add a truncation check for snprintf().

archive()
5)  BUGFIX: Add checks to any checkable function, don't blindly call
    them, this is harmful and there are 100 ways to exploit that.
6)  Use estrlcpy() instead of snprintf() wherever possible, fix
    alignment.
7)  BUGFIX: Terminate the result-buffer of readlink(), check if
    it even succeeded.
8)  Fix sizeof()-formatting.

unarchive()
9)  BUGFIX: Add checks to any checkable function, don't blindly call
    them, this is harmful and there are 100 ways to exploit that.
10) BUGFIX: strtoul can happily return negative numbers. Add checks
    for that and also if the full string has been processed.
11) Remove calls to perror(). We have eprintf, use it.
12) BUGFIX: "minor = strtoul(h->mode, 0, 8);". We need h->minor of
    course.
13) Fix typo "usupported", remove fprintf-call.

print()
14) Check fread().

xt()
15) Get rid of snprintf-magic. Use estrlcat().
16) BUGFIX: check for ferror() on the tarfile.

usage()
17) Update it. The old usage() was like 1000 years old.

main()
18) Add DIRFIRST-flag to the recursor.
19) Don't print usage() when a mode is re-set. We allow this in
    general.
20) Add function checks and fix error messages.
21) Add tarfilename-global for proper error-messages.
2015-03-21 01:30:47 +01:00
FRIGN
a531865fe5 Audit readlink(1)
1) Properly document e, f and m-flags in the manpage.
2) Clear up the code for the m-flag-handling. Add idiomatic
   '/'-path-traversal as already seen in mkdir(1).
3) Unwrap the SWAP_BUF()-macro.
4) BUGFIX: Actually handle the f-flag properly. Only resolve
   the dirname and append the basename later.
5) Use fputs() instead of printf("%s", ...).
2015-03-20 22:14:31 +01:00
Quentin Rameau
e6c20fe367 nl: UTF-8 support and removed the two characters limit for delimiter 2015-03-20 20:21:20 +00:00
FRIGN
b8c9a88371 Reorder variables in seq(1) 2015-03-20 16:37:29 +01:00
FRIGN
7e7d15b7a5 Audit seq(1)
Mostly manpage-stuff and style-changes in the code.
2015-03-20 16:05:31 +01:00
FRIGN
f3224add37 Update README on feature-list
Add "none" to ls, as all pending flags are optional.
sed is feature-complete, so I marked it like that. It needs an audit
though.
seq is implicitly UTF-8-ready, will be audited later.
2015-03-20 15:17:55 +01:00
FRIGN
58098575e7 Audit cp() in libutil
1) Rename cp_HLPflag -> cp_follow for consistency.
2) Use function-pointers for stat to clear up the code.
3) BUGFIX: TERMINATE THE RESULT BUFFER OF READLINK !!!
   It's something I noticed earlier and it actually lead to some
   pretty insane behaviour on our side using glibc (musl somehow
   magically solves this).
   Basically, symlinks used to contain the data of the file they
   pointed to. I wondered for weeks where this came from and now
   this has finally been solved.
4) BUGFIX: Do not unconditionally unlink target-files. Even GNU
   coreutils do it wrong.
   The basic idea is this:
   If fflag == 0 --> don't touch target files if they exist.
   If fflag == 1 --> unlink all and don't error out when we try
                     to unlink a file which doesn't exist.
5) Use estrlcpy and estrlcat instead of snprintf for path building.
6) Make it clearer what happens in preserve.
2015-03-19 17:57:12 +01:00
sin
756f729172 kill: No need for const int 2015-03-19 10:45:58 +00:00
Quentin Rameau
9fdef90feb ls: add -f and -S options 2015-03-19 10:12:12 +00:00
Quentin Rameau
787d99d896 nl: add -d -p -f -h options 2015-03-19 10:10:55 +00:00
FRIGN
3111908b03 Refactor recurse() again
Okay, why yet another recurse()-refactor?
The last one added the recursor-struct, which simplified things
on the user-end, but there was still one thing that bugged me a lot:
Previously, all fn()'s were forced to (l)stat the paths themselves.
This does not work well when you try to keep up with H-, L- and P-
flags at the same time, as each utility-function would have to set
the right function-pointer for (l)stat every single time.

This is not desirable. Furthermore, recurse should be easy to use
and not involve trouble finding the right (l)stat-function to do it
right.
So, what we needed was a stat-argument for each fn(), so it is
directly accessible. This was impossible to do though when the
fn()'s are still directly called by the programs to "start" the
recurse.
Thus, the fundamental change is to make recurse() the function to
go, while designing the fn()'s in a way they can "live" with st
being NULL (we don't want a null-pointer-deref).

What you can see in this commit is the result of this work. Why
all this trouble instead of using nftw?
The special thing about recurse() is that you tell the function
when to recurse() in your fn(). You don't need special flags to
tell nftw() to skip the subtree, just to give an example.

The only single downside to this is that now, you are not allowed
to unconditionally call recurse() from your fn(). It has to be
a directory.
However, that is a cost I think is easily weighed up by the
advantages.

Another thing is the history: I added a procedure at the end of
the outmost recurse to free the history. This way we don't leak
memory.

A simple optimization on the side:

-		if (h->dev == st.st_dev && h->ino == st.st_ino)
+		if (h->ino == st.st_ino && h->dev == st.st_dev)

First compare the likely difference in inode-numbers instead of
checking the unlikely condition that the device-numbers are
different.
2015-03-19 01:08:19 +01:00
FRIGN
b3e8b17235 Audit concat() in libutil
Be more pedantic about the error-checking, fread can also return
values > 0 even though there has been a read-error.
We want to write the last incoming data and then bail.
2015-03-18 22:58:42 +01:00
FRIGN
a68c2a9e6e Remove apathmax() and implicitly agetcwd()
pathconf() is just an insane interface to use. All sane operating-
systems set sane values for PATH_MAX. Due to the by-runtime-nature of
pathconf(), it actually weakens the programs depending on its values.

Given over 3 years it has still not been possible to implement a sane
and easy to use apathmax()-utility-function, and after discussing this
on IRC, we'll dump this garbage.

We are careful enough not to overflow PATH_MAX and even if, any user
is able to set another limit in config.mk if he so desires.
2015-03-18 15:20:35 +01:00
FRIGN
833670e06c Add notice on flags put in parentheses in README 2015-03-18 01:11:55 +01:00
FRIGN
2602681232 ls has explicit UTF-8-support (q-flag) 2015-03-18 01:10:47 +01:00
FRIGN
74dcd46c70 Update README in regard to ls(1)
I marked out -m, -s and -x, because they are either visual flags
for interactive mode, which are better solved with tools made for this
job, or superfluous in another sense.
For example, -s basically "steals" the job from du.
In general, some of these options might still be easy to implement.
The options -S and -f are important though, as they are sorting-options
with real use.
2015-03-18 01:00:13 +01:00
FRIGN
7bacd98b0e Audit wc(1)
Style cleanup, Manpage refactoring.
2015-03-18 00:20:19 +01:00
FRIGN
960bccbe9d Remove comma from uuencode.1 2015-03-18 00:18:28 +01:00
FRIGN
a20a9350db Audit uuencode(1)
Style cleanup, Manpage refactoring.
2015-03-18 00:14:56 +01:00
FRIGN
1b71559431 Audit uudecode(1)
Style cleanup, Manpage refactoring.
2015-03-18 00:10:36 +01:00
FRIGN
4af8889396 Audit uniq(1)
Refactor the manpage and small style-changes in uniq.c.
Remove unnecessary "else", we catch argc > 2 earlier already.
2015-03-17 23:59:09 +01:00
FRIGN
5af4cdcd60 Audit unexpand(1)
I checked the algorithm already a while ago. What was left was a
couple of style-fixes.
2015-03-17 23:45:03 +01:00
FRIGN
f6dc69eca3 Audit tr(1)
A tool of my own devising, except from a small style-fix this code
has already been triple-checked.
2015-03-17 23:41:22 +01:00
FRIGN
95fb7364a8 Audit touch(1)
Only minor things, as I already worked heavily on this tool a while
ago.
Fix style in the main loop and wording in the manpage.
2015-03-17 23:38:09 +01:00
FRIGN
99ded174b2 Audit test(1)
Only add empty lines before returns, everything else is ok.
Also add the STANDARDS-section to the manpage, which was only
present as a heading until now.
2015-03-17 23:35:11 +01:00
FRIGN
6372a8f227 Audit tail(1)
1) Specify default in manpage under flag.
2) Boolean and return value style fixes.
3) argv-argc-centric loop.
4) No need to check for argc == 1 before the fflag-subroutine.
5) Remove indentation.
6) Empty line before return.
2015-03-17 23:24:43 +01:00
FRIGN
3c5d0ce4ca Mark sync(1) as audited
Nothing to be done here.
2015-03-17 23:07:41 +01:00
FRIGN
32b9d76747 Audit strings(1)
Only smaller style-changes. I already refactored the underlying
logic a while ago.
2015-03-17 23:05:50 +01:00
FRIGN
3725d501b3 Audit split(1)
1) Refactor manpage, add STANDARDS section.
2) Boolean-style-changes.
3) Update usage, reflecting num-idiom also changed in the manpage.
4) Refactor error messages.
5) Also fclose stdin.
6) Empty line before return.
2015-03-17 22:59:48 +01:00
FRIGN
4d946a274f Audit renice(1)
1) Get rid of strtop(), which was a NiH-version of estrtonum().
2) Boolean-style-fixes.
3) Update usage, reflecting num-idiom, also update manpage accordingly.
4) Don't break after usage().
5) Rewrite main loop with *argv instead of argv[i].
6) Don't play around with who < 0 and stuff.
7) Rename status to ret for consistency.
2015-03-17 22:15:09 +01:00
FRIGN
c7deb4f2b7 Audit printf(1)
Not a lot to do here, I wrote this less than a month ago. The only
thing I missed was the newline before return.
2015-03-17 21:43:01 +01:00
FRIGN
1bc002b44a Audit paste(1)
Well, basically there was not a lot to do, as I already (fortunately)
audited this code a while back.
There were only minor style-changes.
2015-03-17 21:34:38 +01:00
Evan Gates
cf5114a133 untypedef expr, find, test, as is existing style in sbase 2015-03-17 20:04:26 +00:00
FRIGN
93fd817536 Add estrlcat() and estrlcpy()
It has become a common idiom in sbase to check strlcat() and strlcpy()
using

if (strl{cat, cpy}(dst, src, siz) >= siz)
        eprintf("path too long\n");

However, this was not carried out consistently and to this very day,
some tools employed unchecked calls to these functions, effectively
allowing silent truncations to happen, which in turn may lead to
security issues.
To finally put an end to this, the e*-functions detect truncation
automatically and the caller can lean back and enjoy coding without
trouble. :)
2015-03-17 11:24:49 +01:00
FRIGN
a76d4943b5 Audit mktemp(1)
1) Unglobalize variables.
2) Sort local variables.
3) Use return instead of exit() in main().
4) Add empty line before return.
2015-03-17 11:01:33 +01:00
FRIGN
683d108387 Audit logname(1)
1) Add usage().
2) Idiomatic argv0-setter. We don't use arg.h, as we do not process
   flags or arguments.
3) Remove program-name from eprintf-call. This is done in the eprintf-
   function itself when the DEBUG-define is set.
   We'll activate it by default later.
4) Add empty line before return.
2015-03-17 00:44:18 +01:00
FRIGN
fbda47b964 Rewrite foldline() in fold(1)
After the audit, I had this noted down as a TODO-item, but
considered the function to be tested enough to hold the line
until I came to rewrite it.
Admittedly, I didn't take a closer look at the previous loop
and there probably were some edge-cases which caused trouble, but
so far so good, the new version of this commit should be safe
and considered audited.
2015-03-16 19:26:42 +01:00
FRIGN
64da0d1ebc Audit kill(1)
1) Refactor the manpage with num-options, optimize wording to be more
   concise and to the point, pid also specifies process groups.
2) Make int sig const.
3) Remove prototypes.
4) /* not reached */ consistency.
5) Refactor usage() with eprintf.
6) Refactor arg-parser with a switch, use estrtonum
7) Use return instead of exit() in main()
8) argc-argv-correctness.
2015-03-16 12:37:46 +01:00
FRIGN
ac01240800 Small style-fix in cat.c 2015-03-16 10:36:36 +01:00
sin
f919f2f2a4 test: Fix -e, -r, -w and -x
We return 0 when the expression evaluates to true.  access() returns
0 on a successful call so check against that.
2015-03-13 23:44:18 +00:00
FRIGN
0f60227ea8 Remove judging word from head.1 and tail.1 as well
If it's obsolete, why include it?
No, the point here is that the ARGNUM-syntax has it's place among
us fellow neckbeards. Let's not degrade it.
2015-03-13 23:54:13 +01:00
FRIGN
942c3613bc Audit fold(1)
1) Use num-wording in the manpage, remove offensive remark against
   the beloved -num-syntax <3.
2) Style changes.
3) Report errors of getline.
4) argv-argc-centric argument loop.
5) Rename r to ret for consistency.
2015-03-13 23:50:09 +01:00