- Match &option, and &[lg]:option variables.
- Match Ex commands after :bar.
- Fix matching of pre and post context text.
- Style - use '..' for string concatenation.
fixes#17567closes: #17653
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This brings the upstream files to commit 9dc3bd3 (ftplugin: escape Vim
special characters when opening docs, 2025-08-09). Note that not all
upstream files are included.
closes: #17956
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: a few more files are not recognized
Solution: guess Mail, Info and Terminfo files by its content
(lacygoill)
closes: #17880
Signed-off-by: lacygoill <lacygoill@lacygoill.me>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When the parameter debug=msg is set and the command :option is
entered, error E94 will be displayed.
Solution: Add a check for the existence of the buffer before getting the
buffer number “option-window”.
Reproduce:
vim --clean -c "set debug=msg" -c "option"
Error detected while processing command line..script D:\Programs\Vim\vim91\optwin.vim:
line 9: E94: No matching buffer for option-window
closes: #17927
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim's help file doesn't have any syntax for comments, but
'comments' and 'commentstring' are still set in the help
buffer.
Solution: Unset 'comments' and 'cms' in help buffer
closes: #17889
Signed-off-by: Phạm Bình An <111893501+brianhuster@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Correct expression syntax to match case in if and if-else clauses.
related: #8535closes: #17901
Signed-off-by: veotos <veotos@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: diff: using diff anchors with hidden buffers fails silently
Solution: Give specific error message for diff anchors when using hidden
buffers (Yee Cheng Chin).
Diff anchors currently will fail to parse if a buffer used for diff'ing
is hidden. Previously it would just fail as the code assumes it would
not happen normally, but this is actually possible to do if `closeoff`
and `hideoff` are not set in diffopt. Git's default diff tool "vimdiff3"
also takes advantage of this.
This fix this properly would require the `{address}` parser to be
smarter about whether a particular address relies on window position or
not (e.g. the `'.` address requires an active window, but `'a` or `1234`
do not). Since hidden diff buffers seem relatively niche, just provide a
better error message / documentation for now. This could be improved
later if there's a demand for it.
related: #17615closes: #17904
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
g:vimsyn_folding and g:vimsyn_embed regexps need to match case.
closes: #17914
Signed-off-by: veotos <veotos@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The '?' needs to be escaped, because the autocommand is using
file-patterns (glob like) and not a regex). See :h file-pattern
closes: #17890
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
this was erroneously changed in commit
85cd509885a05c3a6bb029fb378b1295f107f8f6
related: #17857
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
And anticipate occasional multibyte line wrapping owing to:
> A poorly rendered line may otherwise become wrapped when enough of
> spurious U+FFFD (0xEF 0xBF 0xBD) characters claim more columns than
> are available (75) and then invalidate line correspondence under test.
Observe that for "vim_ex_command.vim" another workaround is
chosen: the long line containing an only multibyte character
near its EOL is conversely made longer by padding and moving
the character to a separate _tail_ part of the wrapped line.
That is, the _head_ part of the line is all ASCII characters
and the wrapped _tail_ part is a mix of various characters
whose total byte count is within bounds.
Other unmodified tracked files of interest:
java_lambda_expressions.java,
java_lambda_expressions_signature.java,
java_numbers.java,
markdown_conceal.markdown,
vim9_generic_function_example_set.vim
Also, remove stray U+FFFC (0xEF 0xBF 0xBC) characters.
Related to #16559 and #17704.
Reference:
0fde6aebdd/runtime/syntax/testdir/README.txt (L120-L123)closes: #17868
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Match Neovim functions when has("nvim") is true or g:vimsyn_vim_features
contains "nvim".
Fixes issue #17884.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Ensure :map (and :abbreviate) terminate at | when included in :command
replacement strings containing commands separated by line continuations.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
As reported in #16559, bytes of a multibyte character may
be written as separate U+FFFD characters in a ":terminal"
window on a busy machine. The testing facilities currently
offer an optional filtering step to be carried out between
reading and comparing the contents of two screendump files
for each such file. This filtering has been resorted to
(#14767 and #16560) in an attempt to unconditionally replace
known non-Latin-1 characters with an arbitrary substitute
ASCII character and avoid this rendering mishap leading to
syntax tests failures. However, it has been overlooked at
the time that metadata description (in shorthand) to follow
spurious U+FFFD characters may be *distinct* and make the
remainder of such a line, ASCII characters and whatnot, also
unequal between compared screendump files.
While it is straightforward to adapt current filter files to
ignore the line characters after the leftmost U+FFFD,
> It is challenging and error-prone to keep up to date filter
> files because moving around examples in source files will
> likely make redundant some previously required filter files
> and, at the same time, it may require creating new filter
> files for the same source file; substituting one multibyte
> character for another multibyte character will also demand
> a coordinated change for filter files.
Besides, unconditionally dropping arbitrary parts of a line
is rather too blunt an instrument. An alternative approach
is to not use the supported filtering for this purpose; let
a syntax test pass or fail initially; then *if* the same
failure is imminent, drop the leftmost U+FFFD and the rest
of the previously seen line (repeating it for all previously
seen unequal lines) before another round of file contents
comparing. The obvious disadvantage with this filtering,
unconditional and otherwise, is that if there are consistent
failures for _other reasons_ and the unequal parts happen to
be after U+FFFDs, then spurious test passing can happen when
stars align for _a particular test runner_.
Hence syntax test authors should strive to write as little
significant text after multibyte characters as syntactically
permissible, write multibyte characters closer to EOL in
general, and make sure that their checked-in and published
"*.dump" files do not have any U+FFFDs.
It is also practical to refrain from attempting screendump
generation if U+FFFDs can already be discovered, and instead
try re-running from scratch the syntax test in hand, while
accepting other recently generated screendumps without going
through with new rounds of verification.
Reference:
https://github.com/vim/vim/pull/16470#issuecomment-2599848525closes: #17704
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
These file filters are not sufficient to work around #16559
and are to be superseded by a more promising alternative.
related: #17704
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Improve formatting and naming consistency of the syntax tests.
closes: #17850
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cannot perform autocompletion
Solution: Add the 'autocomplete' option value
(Girish Palya)
This change introduces the 'autocomplete' ('ac') boolean option to
enable automatic popup menu completion during insert mode. When enabled,
Vim shows a completion menu as you type, similar to pressing |i\_CTRL-N|
manually. The items are collected from sources defined in the
'complete' option.
To ensure responsiveness, this feature uses a time-sliced strategy:
- Sources earlier in the 'complete' list are given more time.
- If a source exceeds its allocated timeout, it is interrupted.
- The next source is then started with a reduced timeout (exponentially
decayed).
- A small minimum ensures every source still gets a brief chance to
contribute.
The feature is fully compatible with other |i_CTRL-X| completion modes,
which can temporarily suspend automatic completion when triggered.
See :help 'autocomplete' and :help ins-autocompletion for more details.
To try it out, use :set ac
You should see a popup menu appear automatically with suggestions. This
works seamlessly across:
- Large files (multi-gigabyte size)
- Massive codebases (:argadd thousands of .c or .h files)
- Large dictionaries via the `k` option
- Slow or blocking LSP servers or user-defined 'completefunc'
Despite potential slowness in sources, the menu remains fast,
responsive, and useful.
Compatibility: This mode is fully compatible with existing completion
methods. You can still invoke any CTRL-X based completion (e.g.,
CTRL-X CTRL-F for filenames) at any time (CTRL-X temporarily
suspends 'autocomplete'). To specifically use i_CTRL-N, dismiss the
current popup by pressing CTRL-E first.
---
How it works
To keep completion snappy under all conditions, autocompletion uses a
decaying time-sliced algorithm:
- Starts with an initial timeout (80ms).
- If a source does not complete within the timeout, it's interrupted and
the timeout is halved for the next source.
- This continues recursively until a minimum timeout (5ms) is reached.
- All sources are given a chance, but slower ones are de-prioritized
quickly.
Most of the time, matches are computed well within the initial window.
---
Implementation details
- Completion logic is mostly triggered in `edit.c` and handled in
insexpand.c.
- Uses existing inc_compl_check_keys() mechanism, so no new polling
hooks are needed.
- The completion system already checks for user input periodically; it
now also checks for timer expiry.
---
Design notes
- The menu doesn't continuously update after it's shown to prevent
visual distraction (due to resizing) and ensure the internal list
stays synchronized with the displayed menu.
- The 'complete' option determines priority—sources listed earlier get
more time.
- The exponential time-decay mechanism prevents indefinite collection,
contributing to low CPU usage and a minimal memory footprint.
- Timeout values are intentionally not configurable—this system is
optimized to "just work" out of the box. If autocompletion feels slow,
it typically indicates a deeper performance bottleneck (e.g., a slow
custom function not using `complete_check()`) rather than a
configuration issue.
---
Performance
Based on testing, the total roundtrip time for completion is generally
under 200ms. For common usage, it often responds in under 50ms on an
average laptop, which falls within the "feels instantaneous" category
(sub-100ms) for perceived user experience.
| Upper Bound (ms) | Perceived UX
|----------------- |-------------
| <100 ms | Excellent; instantaneous
| <200 ms | Good; snappy
| >300 ms | Noticeable lag
| >500 ms | Sluggish/Broken
---
Why this belongs in core:
- Minimal and focused implementation, tightly integrated with existing
Insert-mode completion logic.
- Zero reliance on autocommands and external scripting.
- Makes full use of Vim’s highly composable 'complete' infrastructure
while avoiding the complexity of plugin-based solutions.
- Gives users C native autocompletion with excellent responsiveness and
no configuration overhead.
- Adds a key UX functionality in a simple, performant, and Vim-like way.
closes: #17812
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This change includes the following upstream commits:
- fix: remove black lines in directory listing
- fix: correctly create new file when using Lexplore
- refactor: remove print functionality
The main highlight is removing print functionality that was broken both
in neovim and vim.
closes: #17847
Signed-off-by: Luca Saccarola <github.e41mv@aleeas.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: can define an enum/interface in a function
(lacygoill)
Solution: Give an error when defining an enum or an interface inside a
function (Yegappan Lakshmanan)
fixes: #17835fixes: #17837closes: #17837
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add complete_check() to ccomplete completion script to avoid UI hangs
and keep Vim responsive as ccomplete can be slow on huge files.
closes: #17826
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wayland: gvim still needs GVIM_ENABLE_WAYLAND
Solution: Drop the GVIM_ENABLE_WAYLAND code, always enable both X11 and
Wayland GUI support (Christoffer Aasted)
closes: #17817
Signed-off-by: Christoffer Aasted <chr.aasted@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :term splits new window above in vim, but in nvim it change
the buffer for current window
Solution: :hor term to ensure consistent splitting for Vim and Neovim
closes: #17822
Signed-off-by: phanium <91544758+phanen@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
