Problem: Vim9: error when last enum value ends with a comma
Solution: Allow trailing commas in enum values (Yegappan Lakshmanan).
closes: #17744
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: menu state wrong on interruption
(Maxim Kim)
Solution: Call show_pum() if completion was interrupted
(Girish Palya).
Popup menu was not built after fuzzy sorting, so internal state wasn't
reflected on screen.
No test. Couldn't get the terminal test to trigger both interruption and
refresh together.
fixes: #17725closes: #17736
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: messages don't respect 'shm' setting
Solution: Turn off completion messages when 'shortmess' includes "c"
(Girish Palya).
`:set shortmess+=c` is intended to reduce noise during completion by
suppressing messages.
Previously, some completion messages still appeared regardless of this setting.
This change ensures that **all** completion-related messages are suppressed
when `'c'` is present in `'shortmess'`.
Not entirely sure if the original behavior was intentional. If there's a
reason certain messages were always shown, feel free to close this without
merging.
closes: #17737
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: string options in gen_opt_test.vim aren't fully sorted.
Solution: Sort the string options alphabetically. Also make description
of 'maxsearchcount' start with lower-case for consistency with
other options, update documentation for searchcount().
closes: #17720
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: helptoc: still some issues when parsing markdown code blocks
(VimWei)
Solution: assign nextline to curline before starting the next loop
iteration; when processing fenced code blocks, flip the
skip_fence variable, update the test to be more comprehensive
related: https://github.com/vim/vim/issues/17699#issuecomment-3055603968closes: #17716
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_plugin_comment.vim uses :CheckScreenDump check but
doesn't actually use a screen dump.
Solution: Use :CheckRunVimInTerminal instead, remove a few empty lines.
test_plugin_comment.vim uses :CheckScreenDump to test for the screen
dump feature in each single test case.
However, since we are not actually using any screen dumps, it would be
more correct to use :CheckRunVimInTerminal, since this is the actual
command that we want to run.
And instead of verifying this for each single test, let's just do it
once when sourcing the file. While doing this, also remove some white
spaces.
closes: #17711
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The maximum search count uses a hard-coded value of 99
(Andres Monge, Joschua Kesper)
Solution: Make it configurable using the 'maxsearchcount' option.
related: #8855fixes: #17527closes: #17695
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: helptoc: does not handle code sections in markdown well
(VimWei)
Solution: Skip over fenced code sections (lacygoill), add a test.
fixes: #17699closes: #17710
Co-authored-by: lagygoill <lacygoill@lacygoill.me>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: termdebug: not enough ways to configure breakpoints
Solution: add the termdebug_config['signs'] config setting, rework the
termdebug test cases (Dimitry Ishenko)
Allow to configure custom breakpoint signs so one can do something like
this:
```vim
let g:termdebug_config['signs'] = ['>1', '>2', '>3', '>4', '>5', '>6', '>7', '>8', '>9']
let g:termdebug_config['sign'] = '>>'
```
where the first 9 breakpoints will have their own signs and the rest
will be the same (>>).
While at it, rework the test for the termdebug plugin:
- Added test for g:termdebug_config['signs'].
- Added test for g:termdebug_config['sign'].
- Moved test for g:termdebug_config['sign_decimal'] into
Test_termdebug_basic()
closes: #17694
Signed-off-by: Dimitry Ishenko <dimitry.ishenko@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: crash with getcompletion()
(zeertzjq)
Solution: Don't set may_expand_pattern in f_getcompletion(),
unset may_expand_pattern() once it is not longer needed
(Girish Palya).
fixes: #17680closes: #17686
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: Crash when using string compound assignment with wrong
data type (lacygoill)
Solution: verify expected member type (Hirohito Higashi)
fixes: #17675closes: #17693
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: search completion match may differ in case
(techntools)
Solution: add "exacttext" to 'wildoptions' value (Girish Palya)
This flag does the following:
exacttext
When this flag is present, search pattern completion
(e.g., in |/|, |?|, |:s|, |:g|, |:v|, and |:vim|)
shows exact buffer text as menu items, without
preserving regex artifacts like position
anchors (e.g., |/\<|). This provides more intuitive
menu items that match the actual buffer text. However,
searches may be less accurate since the pattern is not
preserved exactly.
By default, Vim preserves the typed pattern (with
anchors) and appends the matched word. This preserves
search correctness, especially when using regular
expressions or with 'smartcase' enabled. However, the
case of the appended matched word may not exactly
match the case of the word in the buffer.
fixes: #17654closes: #17667
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: testdir is a bit messy
Solution: move test scripts into testdir/util/ directory
src/testdir/ has become a dumping ground mixing test cases with utility
functions. Let's fix this by moving all utility functions into the
testdir/util/ directory
Also a few related changes had to be done:
- Update Filelist
- update README.txt and mention the new directory layout
- fix shadowbuild by linking the util directory into the shadow dir
closes: #17677
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: too many imports in the test suite
Solution: Clean up the imported scripts
Most tests make use of check.vim, so let's just source it once in
runtest.vim instead of having each test manually source it.
runtest.vim already sources shared.vim, which again sources
view_util.vim, so we don't need to source those two common
dependencies in all the other tests
And then check.vim sources term_util.vim already, so we can in addition
drop sourcing it explicitly in each single test script.
Note: test_expand_func.vim had to be updated to account for the changed
number of sourced files.
And finally check.vim uses line-continuation so let's also explicitly
enable line continuation via the 'cpo' option value.
related: #17677
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_clipmethod fails in non X11 environment
Solution: test that $DISPLAY is available
related: #17677
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: still some ANSI escape sequences in test messages output
Solution: update the cleanup regexp to also handle those ANSI escape
sequences: `<esc>|2h` and `<esc>|31H` like in this log output:
```
2025-07-05T20:02:47.6350409Z <esc>|2hExecuted 171 tests in 4.739708 seconds<esc>|31H
```
related: #17677
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When 'wildmode' is set to include "noselect", the popup menu (pum)
incorrectly retained its scroll position when reopened. This
meant that after scrolling down through the menu with `<C-n>`,
reopening the menu (e.g., by retyping the command and
triggering completion again) would show the menu starting from
the previously scrolled position, rather than from the top.
This could confuse users, as the first visible item would not
be the first actual match in the list.
Solution: Ensure that the popup menu resets its scroll position to the
top when reopened (Girish Palya).
closes: #17673
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When using `/` or `?` in command-line mode with 'ignorecase' and
'smartcase' enabled, the completion menu could show items that
don't actually match any text in the buffer due to case mismatches
Solution: Instead of validating menu items only against the user-typed
pattern, the new logic also checks whether the completed item
matches actual buffer content. If needed, it retries the match
using a lowercased version of the candidate, respecting
smartcase semantics.
closes: #17665
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Test_termdebug_decimal_breakpoints() fails with List index out
of range, because when adding the second breakpoint, the
cursor is still on the very first line (a header include line)
and therefore gdb refuses to set the breakpoint with:
`msg="No compiled code for line 1 in file XTD_decimal.c"`
Solution: Run the program, so that it will break at the very first
defined breakpoint and then once we are in the program,
set further breakpoints
closes: #17689
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: getcompletiontype() crashes when no completion is available
(after v9.1.1509).
Solution: Don't call set_expand_context() (zeertzjq)
fixes: #17681closes: #17684
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: autopkgtest files are not recognized
Solution: detect */debian/tests/control files as autopkgtest filetype
(James McCoy)
Autopkgtest is a Debian tool for testing installed versions of packages
when other, related packages are updated.
Reference:
- https://www.debian.org/doc/debian-policy/autopkgtest.txt
related: #17679
Signed-off-by: James McCoy <jamessan@jamessan.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: no test that 'incsearch' is updated after accepting
search completion.
Solution: Add a test case (zeertzjq).
closes: #17682
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: coverity complains about the use of tmpfile()
Solution: use vim_tempname() instead to create anonym file
related: #17097closes: #17674
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: can only complete from keyword characters
Solution: remove this restriction, allow completion functions when
called from i_CTRL-N/i_CTRL-P to be triggered from non-keyword
characters (Girish Palya)
Previously, functions specified in the `'complete'` option were
restricted to starting completion only from keyword characters (as
introduced in PR 17065). This change removes that restriction.
With this change, user-defined functions (e.g., `omnifunc`, `userfunc`)
used in `'complete'` can now initiate completion even when triggered
from non-keyword characters. This makes it easier to reuse existing
functions alongside other sources without having to consider whether the
cursor is on a keyword or non-keyword character, or worry about where
the replacement should begin (i.e., the `findstart=1` return value).
The logic for both the “collection” and “filtering” phases now fully
respects each source’s specified start column. This also extends to
fuzzy matching, making completions more predictable.
Internally, this builds on previously merged infrastructure that tracks
per-source metadata. This PR focuses on applying that metadata to
compute the leader string and insertion text appropriately for each
match.
Also, a memory corruption has been fixed in prepare_cpt_compl_funcs().
closes: #17651
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: two edit tests change v:testing from 1 to 0.
Solution: Don't change v:testing in these two tests, since it's already
set to 1 in runtest.vim (zeertzjq).
closes: #17660
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Search completion may use invalid memory (after 9.1.1490).
Solution: Don't get two line pointers at the same time (zeertzjq).
closes: #17661
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Patch 9.1.1505 was not good
Solution: Revert "patch 9.1.1505: not possible to return completion type
for :ex command" and instead add the getcompletiontype()
function (Hirohito Higashi).
related: #17606closes: #17662
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: String manipulation can be improved in cmdexpand.c
Solution: Refactor cmdexpand.c to remove calls to
STRLEN()/STRMOVE()/STRCAT() (John Marriott)
This commit does the following:
In function nextwild():
- slightly refactor the for loop to remove an array access
- call STRLEN() and store it's result for reuse
- move some variables closer to where they are used, renaming some on
the way
In function ExpandOne():
- move some calculations outside of the for loops
- factor out calls to STRCAT() (which has an inherent STRLEN() call) in
the for loop
- move some variables closer to where they are used
In function expand_files_and_dirs():
- factor out calls to STRMOVE() (which has an inherent STRLEN() call)
In function get_filetypecmd_arg():
- move declarations of the string arrays into the blocks where they are
used
In function get_breakadd_arg():
- move declaration of the string array into the block where it is
used
In function globpath():
- factor out calls to STRLEN() and STRCAT()
- move some variables closer to where they are used
And finally some minor cosmetic style changes
closes: #17639
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: File paths change from symlink to target path after :cd command
when editing files through symbolic links
Solution: Add "~" flag to 'cpoptions' to control symlink resolution.
When not included (default), symlinks are resolved maintaining
backward compatibility. When included, symlinks are preserved
providing the improved behavior. (glepnir)
related: neovim/neovim#15695
closes: #17628
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to return command-line completion type for :ex
command
Solution: make getcmdcompltype() accept an optional and return the
command-line completion for that arg (Shougo Matsushita).
closes: #17606
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: no indication of ARM64 architecture
Solution: Add ARM64 to version output and include in nsis installer
(RestorerZ)
related: vim/vim-win32-installer#381
closes: #17642
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: Functions specified in the 'complete' option did
not have the leader string removed when called with findstart = 0,
unlike 'omnifunc' behavior
Solution: update behaviour and make behaviour consistent (Girish Palya)
closes: #17636
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Link error with shm_open()
(gcanat, after v9.1.1485)
Solution: use AC_LINK_IFELSE instead of AC_COMPILE_IFELSE
fixes: #17634
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: terminal: still not highlighting empty cells correctly
(Yousef Mohammed, after v9.1.1489)
Solution: Use vcol instead of col
closes: #17632
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wayland: uses $XDG_SEAT to determine seat to use
(dr0bz, after v9.1.1485)
Solution: Do not try to determine the seat from $XDG_SEAT, remove the
code that checks for this environment variable (Foxe Chen).
related: https://github.com/vim/vim/issues/5157#issuecomment-3015248239closes: #17625
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: runtime(tutor): no French translation for Chapter 2
Solution: add and refine French translation of tutor2, update French
vimtutor manpage (Damien Lejay)
- Add runtime/tutor/tutor2.fr.utf-8
- Improve translation based on review
- Update references in tutor1.fr and vimtutor-fr.1
- Adjust MAINTAINERS accordingly
closes: #17546
Co-authored-by: Gabriel Dupras <57042631+gdupras@users.noreply.github.com>
Signed-off-by: Damien Lejay <damien@lejay.be>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: manually comparing positions on buffer
(after v9.1.1490)
Solution: use the LTOREQ_POS() macro, fix a few other minor style issues
(glepnir)
closes: #17629
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: failure when Wayland compositor fails to start
Solution: instead of throwing an error causing a failure, throw
"Skipped", so that the Vim test suite continues and does not
fail
Signed-off-by: Christian Brabandt <cb@256bit.org>
