Problem: Vim9: No support for type aliases
Solution: Implement :type command
A type definition is giving a name to a type specification. This also known
type alias.
:type ListOfStrings = list<string>
The type alias can be used wherever a built-in type can be used. The type
alias name must start with an upper case character.
closes: #13407
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: TextChangedI may not always trigger
Solution: trigger it in more cases: for insert/
append/change operations, and when
opening a new line,
fixes: #13367closes: #13375
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: Completion menu may be wrong
Solution: Check for the original direction of the completion menu,
add more tests, make it work with 'noselect'
completion: move in right direction when filling completion_info()
When moving through the insert completion menu and switching directions,
we need to make sure we start at the correct position in the list and
move correctly forward/backwards through it, so that we do not skip
entries and the selected item points to the correct entry in the list
of completion entries generated by the completion_info() function.
The general case is this:
1) CTRL-X CTRL-N, we will traverse the list starting from
compl_first_match and then go forwards (using the cp->next pointer)
through the list (skipping the very first entry, which has the
CP_ORIGINAL_TEXT flag set (since that is the empty/non-selected entry
2) CTRL-X CTRL-P, we will traverse the list starting from
compl_first_match (which now points to the last entry). The previous
entry will have the CP_ORIGINAL_TEXT flag set, so we need to start
traversing the list from the second prev pointer.
There are in fact 2 special cases after starting the completion menu
with CTRL-X:
3) CTRL-N and then going backwards by pressing CTRL-P again.
compl_first_match will point to the same entry as in step 1 above,
but since compl_dir_foward() has been switched by pressing CTRL-P
to backwards we need to pretend to be in still in case 1 and still
traverse the list in forward direction using the cp_next pointer
4) CTRL-P and then going forwards by pressing CTRL-N again.
compl_first_match will point to the same entry as in step 2 above,
but since compl_dir_foward() has been switched by pressing CTRL-N
to forwards we need to pretend to be in still in case 2 and still
traverse the list in backward direction using the cp_prev pointer
For the 'noselect' case however, this is slightly different again. When
going backwards, we only need to go one cp_prev pointer back. And
resting of the direction works again slightly different. So we need to
take the noselect option into account when deciding in which direction
to iterate through the list of matches.
related: #13402
related: #12971closes: #13408
Signed-off-by: Christian Brabandt <cb@256bit.org>
* Update Debian runtime files
Add mantic as a supported Ubuntu release and move buster/kinetic to
unsupported.
Add syntax highlighting for deb822sources filetype.
Add debsources ftplugin to set relevant comment options.
Move common version information to shared/debversions.vim
Closes#11934
Co-authored-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Co-authored-by: James Addison <jay@jp-hosting.net>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Signed-off-by: James McCoy <jamessan@jamessan.com>
* Add myself as codeowner for Debian-related runtime files
Signed-off-by: James McCoy <jamessan@jamessan.com>
---------
Signed-off-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Co-authored-by: James Addison <jay@jp-hosting.net>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: no nr2str conversion in list-unpack
Solution: Generate 2STRING instruction to convert dict index to string
Generate instruction to convert dict index to a string
fixes: #13417closes: #13424
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: #13425
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Problem: [security] disallow setting env in restricted mode
Solution: Setting environment variables in restricted mode could
potentially be used to execute shell commands. Disallow this.
restricted mode: disable allow setting of environment variables
Setting environment variables in restricted mode, may have some unwanted
consequences. So, for example by setting $GCONV_PATH in restricted mode
and then calling the iconv() function, one may be able to execute some
unwanted payload, because the `iconv_open()` function internally uses
the `$GCONV_PATH` variable to find its conversion data.
So let's disable setting environment variables, even so this is no
complete protection, since we are not clearing the existing environment.
I tried a few ways but wasn't successful :(
One could also argue to disable the iconv() function completely in
restricted mode, but who knows what other API functions can be
influenced by setting some other unrelated environment variables.
So let's leave it as it is currently.
closes: #13394
See: https://huntr.com/bounties/b0a2eda1-459c-4e36-98e6-0cc7d7faccfe/
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: possible to escape bracketed paste mode with Ctrl-C
Solution: Do not handle Ctrl-C specially when key_protocol
is in use, makes bracketed paste mode more robust
When a key protocol is in use Ctrl-C will be sent as an escape sequence,
but a raw Ctrl-C can be sent when pasting data. Pass this through, so
that a Ctrl-C can be pasted and won't result in exiting insert mode
(where the rest of the pasted keys can cause all kind of nasty
side-effects).
Many terminals will strip control characters in paste data (and xterm
will strip ^C since version 388), but this provides some defense in
depth if users change settings like xterm's allowPasteControls.
closes: #13398
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security] overflow in :history
Solution: Check that value fits into int
The get_list_range() function, used to parse numbers for the :history
and :clist command internally uses long variables to store the numbers.
However function arguments are integer pointers, which can then
overflow.
Check that the return value from the vim_str2nr() function is not larger
than INT_MAX and if yes, bail out with an error. I guess nobody uses a
cmdline/clist history that needs so many entries... (famous last words).
It is only a moderate vulnerability, so impact should be low.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-q22m-h7m2-9mgm
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: xxd: coloring was disabled on Cygwin
Solution: don't include WIN32
xxd: Fix that color was disabled on Cygwin
"windows.h" was unintentionally included on Cygwin since 9.0.1834.
This accidentally disabled coloring on Cygwin.
Stop including "windows.h" on Cygwin.
closes: #13414
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: EXPAND flag set for filetype option
Solution: Remove P_EXPAND flag from the 'filetype' option
Remove P_EXPAND flag from the 'filetype' option
Problem: P_EXPAND flag is erroneously set for 'filetype' option
Solution: Remove the P_EXPAND flag
This flag is used by string options that accept file path values. See
:help set_env.
This appears to have been included in d5e8c92 and resulted from an
incorrect implementation of 'filetype' completion.
See #12900 for a small discussion.
related: #12900closes: #13416
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: cannot use buffer-number for errorformat
Solution: add support for parsing a buffer number using '%b' in
'errorformat'
closes: #13419
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: pacman hooks are detected as conf filetype
Solution: make it consistent to pacman.conf and detect those
hooks as confini
Because confini has much better syntax highlighting than conf.
For reference, I identified pacman.conf and pacman hooks as dosini in
https://github.com/vim/vim/pull/6335, then
https://github.com/vim/vim/pull/10213 changed them to conf, then
https://github.com/vim/vim/pull/10518 changed pacman.conf to confini but
forgot to change hooks.
closes: #13399
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.orgcloses: #13400
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: #13401
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: *.{gn,gni} files are not recognized
Solution: Detect some as gn filetype (without adding an extra filetype)
Those come from: https://gn.googlesource.com/gn/closes: #13405
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Amaan Qureshi <amaanq12@gmail.com>
- update and correct the documentation for varargs for Vim9 and make
sure to mention that a <list> type is required.
- mention that 3match is used the matchparen plugin before 9.0.2054
(actually this is not correct, but before that patch, Vim used the
hardcoded id 3)
closes: #13403closes: #13409
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Fix the pattern used by comment-motion mappings to match the start of a
block comment.
Block-comment start lines were being ignored if the previous line
contained a double-quote character anywhere in the line. Line comments
should only be ignored if the previous line is a full-line comment and,
therefore, part of the current block comment.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: outstanding exceptions may be skipped
Solution: When restoring exception state, process remaining outstanding
exceptions
closes: #13386
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: tests: avoid error when no swap files exist
Solution: use unlet! so that no error message is reported
in case the variable does not exists
When s:GetSwapFileList() does not find any swapfiles, it will return an
empty list []. This means, that the variable 'name' will not be
declared, cause the following unlet command to fail and causing a 1 sec
delay on running the tests.
So let's instead use the :unlet! command which simply skips reporting an
error when the variable given as parameter does not exists.
closes: #13396
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9: no strict type checks for funcrefs varargs
Solution: Perform strict type checking when declaring funcrefs
with vararg declaration, add tests
closes: #13397
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
* matchparen: do not use hard-coded match id
Instead of using the hard-coded match id 3, which may also be used by
other plugins, let the matchparen plugin use whatever ids are
automatically returned when calling matchaddpos().
For backwards-compatibility, keep the `:3match` call, which will still
use the hard-coded id 3 (as mentioned in :h :3match).
closes: #13381
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: no digraph for quadruple prime
Solution: add quadruple prime digraph using 4'
closes: #13380
Signed-off-by: Jonathan Wright <quaggy@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Jonathan Wright <quaggy@gmail.com>
Problem: Vim9: non-consistent error messages
Solution: make error messages more consistent with common structure
Adjust vim9class messages to follow common pattern.
[Variable|Method] "var-or-meth-name" ... class "class-name"
closes: #13391
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: win32: iscygpty needs update
Solution: Update iscygpty to the latest version, make use iswascii()
API function
Import the latest version from https://github.com/k-takata/ptycheck.
This addresses #13332 for iscygpty()
closes: #13392
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: zig filetype detection test wrong
Solution: Remove .zir pattern, add new test for .zon pattern
closes: #13389
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: win32: using deprecated wsock32 api
Solution: Use winsock2 (ws2_32) consistently
win32: Stop using wsock32
We have already used ws2_32 (winsock2) and already dropped support for
Windows 95 and NT4. So, we don't need to care about wsock32.
Use ws2_32 consistently.
closes: #13383
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: Vim9: wrong error for non-existing object var
Solution: mention object or class depending on whether
the var is an object or class variable.
closes: #13384closes: #13387
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Update runtime files from upstream (https://github.com/zig/zig.vim) at
commit 54c216e5306a5c3878a60596aacb94dca8652ab9.
Signed-off-by: Christian Brabandt <cb@256bit.org>
They do no longer support us, since they are shifting away to AI/ML
projects only. So remove any mentioned of using huntr.dev
https://huntr.com/new-huntr-faq/
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: crash with deferred function call and exception
Solution: Save and restore exception state
Crash when a deferred function is called after an exception and another
exception is thrown
closes: #13376closes: #13377
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: not recognizing qualified class vars for infix ops
Solution: Drop the class type from the stack before generating the
CLASSMEMBER instruction
closes: #13378closes: #13379
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: python: uninitialized warning
Solution: initialize 'minor' always
win32,py3: Fix uninitialized warning
Fix the following warning:
```
if_python3.c: In function 'py3_get_system_libname':
if_python3.c:879:16: warning: 'minor' may be used uninitialized [-Wmaybe-uninitialized]
879 | if (minor == PY_MINOR_VERSION)
| ^
if_python3.c:839:24: note: 'minor' was declared here
839 | long major, minor;
| ^~~~~
```
closes: #13368
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: win32,python: warning that MS_WIN64 got re-defined
Solution: Do not define MS_WIN64, as it is no longer used
Suppress the following warning:
```
In file included from C:/Python312-64/include/Python.h:12,
from if_python3.c:79:
C:/Python312-64/include/pyconfig.h:240: warning: "MS_WIN64" redefined
240 | #define MS_WIN64
|
<command-line>: note: this is the location of the previous definition
```
`MS_WIN64` is not defined in `Make_mvc.mak` either.
This should be able to be safely removed.
closes: #13370
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: tests: checking for swap files takes time
Solution: don't check for swap files when test has been skipped
Check for swap files takes a considerable about of time, so don't do
that for skipped tests to avoid wasting time.
closes: #13371
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Test_cq_zero_exmode fails without channel feature
Solution: Make the test check the channel feature
closes: #13365
Signed-off-by: Christian Brabandt <cb@256bit.org>
