Problem: no support for custom cmdline completion
Solution: Add new vimscript functions
Add the following two functions:
- getcmdcompltype() returns custom and customlist functions
- getcompletion() supports both custom and customlist
closes: #12228
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: '.-' no allowed in highlight group names
Solution: Allow dot and hyphen characters in highlight group names
Allow dots and hyphens in group names. There does not seem
to be any reason for these to be disallowed.
closes: #12807
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: Not able to get the virtual text property
Solution: Make prop_list() return virtual text and alignment
closes: #12860
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: g<kEnd> behaves different from g<end>
Solution: Make g<kEnd> behave like g<End>
closes: #12861
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: vim9 class problem with new() constructor
Solution: Don't allow a return type for the new() class constructor.
closes: #12863closes: #12040
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: can't move to last non-blank char
Solution: Make g<end> behave like that
Make it possible to move to last non-blank char on a line
We can distinguish between g0 and g^ to move to the very first character
and the first non-blank char.
And while we can move to the last screen char, we cannot go to the last
non-blank screen char.
Since I think g$ is the more widely used and known movement command (and
g<end> is synonymous to it) change the behaviour of g<end> to move to
last non-screen char instead and don't have this be the same command as
the g$ command anymore.
If you want to keep the old behaviour, you can use:
```
nnoremap g<end> g$
```
Add a test to verify the behaviour.
closes: #12593
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: missing winid argument for virtcol()
Solution: Add a {winid} argument to virtcol()
Other functions col(), charcol() and virtcol2col() support a {winid}
argument, so it makes sense for virtcol() to also support than.
Also add test for virtcol2col() with 'showbreak' and {winid}.
closes: #12633
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: minor problems with the teapot()
Solution: remove the null check, update documentation
Update the builtin-function-list entry. (It implicitly returns 0, but such
functions usually use "none")
Also, tv_get_string_strict() can not return NULL, so remove that check
closes: #12647
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: virtcol2col returns last byte of a multi-byte char
Solution: Make it return the first byte for a multi-byte char
closes: #12786closes: #12799
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: sidescrolloff and scrolloff options work slightly
different than other global-local options
Solution: Make it behave consistent for all global-local options
It was noticed, that sidescrolloff and scrolloff options behave
differently in comparison to other global-local window options like
'listchars'
So make those two behave like other global-local options. Also add some
extra documentation for a few special local-window options.
Add a few tests to make sure all global-local window options behave
similar
closes: #12956closes: #12643
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot use positional arguments for printf()
Solution: Support positional arguments in string formatting
closes: #12140
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
* Dedicate upcoming Vim 9.1 to Bram
Also replace in a few more places Brams email address and mention new
maintainers.
* Remove Bram from any Maintainer role
* runtime: Align Header
* it's mailing list not mailinglist
Problem: undotree() only works for the current buffer
Solution: Add an optional "buffer number" parameter to undotree(). If
omitted, use the current buffer for backwards compatibility.
closes: #4001closes: #12292
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Co-authored-by: Devin J. Pohly <djpohly@gmail.com>
Using xxd(1) to filter and edit binary files causes the input files
to have dual nature, so to speak, which effectively makes restoring
the cursor position broken. Fix that by ignoring the "xxd" file type
in the code that restores the cursor position.
Interactive rebasing in git causes files to be edited in vim, which,
similarly to commit messages, are rarely the same as the last one
edited. Thus, also add "gitrebase" to the list of file types for
which the cursor position isn't restored.
While there, refactor the code a bit to possibly save a few CPU cycles
and to keep the line lengths in check, and use the long form of the
commands and variables, to make the code slightly more consistent and
more understandable to newcomers.
Update the relevant comments in the code and the associated parts of
the documentation, to keep them in sync with the updated code.
Remove some redundant trailing whitespace as well, as spotted.
Save and restore the view position before and after saving the buffer,
respectively, to keep the current view of the xxd(1)'s hex dump
unchanged after doing ":w", which previously caused the window to
scroll back to the very beginning of the buffer. I believe it's
needless to say how annoying and counterproductive that was.
Get rid of the "Press ENTER or type command to continue" message, which
was previously displayed after opening larger binary files. The use
of "silent" and "redraw" commands is tailored specifically to avoid
screen flickering, e.g. when doing ":w", which is caused by the buffer
being filtered by an external command.
Increase the number of octets per line, produced by xxd(1), from the
default value of 16 to 32. This puts bigger chunks of the hex dump
on the screen and makes the whole thing much more usable.
While there, reformat the code to make it more readable, and use the
long form of the commands and variables to make the code slightly more
consistent and more understandable to newcomers.
This is a collection of various PRs from github that all require a minor
patch number:
1) https://github.com/vim/vim/pull/12612
Do not conflate dictionary key with end of block
2) https://github.com/vim/vim/pull/12729:
When saving and restoring 'undolevels', the constructs `&undolevels` and
`:set undolevels` are problematic.
The construct `&undolevels` reads an unpredictable value; it will be the
local option value (if one has been set), or the global option value
(otherwise), making it unsuitable for saving a value for later
restoration.
Similarly, if a local option value has been set for 'undolevels',
temporarily modifying the option via `:set undolevels` changes the local
value as well as the global value, requiring extra work to restore both
values.
Saving and restoring the option value in one step via the construct
`:let &undolevels = &undolevels` appears to make no changes to the
'undolevels' option, but if a local option has been set to a different
value than the global option, it has the unintended effect of changing
the global 'undolevels' value to the local value.
Update the documentation to explain these issues and recommend explicit
use of global and local option values when saving and restoring. Update
some unit tests to use `g:undolevels`.
3) https://github.com/vim/vim/pull/12702:
Problem: Pip requirements files are not recognized.
Solution: Add a pattern to match pip requirements files.
4) https://github.com/vim/vim/pull/12688:
Add indent file and tests for ABB Rapid
5) https://github.com/vim/vim/pull/12668:
Use Lua 5.1 numeric escapes in tests and add to CI
Only Lua 5.2+ and LuaJIT understand hexadecimal escapes in strings. Lua
5.1 only supports decimal escapes:
> A character in a string can also be specified by its numerical value
> using the escape sequence \ddd, where ddd is a sequence of up to three
> decimal digits. (Note that if a numerical escape is to be followed by a
> digit, it must be expressed using exactly three digits.) Strings in Lua
> can contain any 8-bit value, including embedded zeros, which can be
> specified as '\0'.
To make sure this works with Lua 5.4 and Lua 5.1 change the Vim CI to
run with Lua 5.1 as well as Lua 5.4
6) https://github.com/vim/vim/pull/12631:
Add hurl filetype detection
7) https://github.com/vim/vim/pull/12573:
Problem: Files for haskell persistent library are not recognized
Solution: Add pattern persistentmodels for haskell persistent library
closes: #12612closes: #12729closes: #12702closes: #12688closes: #12668closes: #12631closes: #12573
Co-authored-by: lacygoill <lacygoill@lacygoill.me>
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Jacob Pfeifer <jacob@pfeifer.dev>
Co-authored-by: Borys Lykah <lykahb@fastmail.com>
Problem: charidx() and utf16idx() result is not consistent with byteidx().
Solution: When the index is equal to the length of the text return the
lenght of the text instead of -1. (Yegappan Lakshmanan,
closes#12503)
Problem: Some commands for opening a file don't use 'switchbuf'.
Solution: Use 'switchbuf' for more commands. (Yegappan Lakshmanan,
closes#12383, closes#12381)
Problem: No error when calling remote_startserver() with an empty string.
Solution: Give an error for an empty string. (Hirohito Higashi,
closes#12327)
Problem: no functions for converting from/to UTF-16 index.
Solution: Add UTF-16 flag to existing funtions and add strutf16len() and
utf16idx(). (Yegappan Lakshmanan, closes#12216)
Problem: Decrypting with libsodium may fail if the library changes.
Solution: Add parameters used to the encrypted file header. (Christian
Brabandt, closes#12279)
Problem: Highlight for popupmenu kind and extra cannot be set.
Solution: Add PmenuKind, PmenuKindSel, PmenuExtra and PmenuExtraSel
highlight groups and use them. (Gianmaria Bajo, closes#12114)
Problem: 'statusline' only supports one "%=" item.
Solution: Add support for multiple "%=" items. (TJ DeVries, Yegappan
Lakshmanan, closes#11970, closes#11965)
