It's common to optionally prefix commands like 'packadd!' with
'silent!', but that wasn't recognized by these patterns.
This change adds 'silent' support to the 'packadd', 'runtime', and
'colorscheme' command patterns.
closes: #18361
Signed-off-by: Jon Parise <jon@indelible.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: .inc file detection can be improved
Solution: Update filetype detection for Pascal and BitBake code
(Martin Schwan).
Fix the detection of .inc files containing Pascal and BitBake code:
- the concatenated string, merged from three lines, only contains one
beginning and the pattern "^" would not match as expected. Use a range()
loop to iterate each line string individually. This way, the pattern "^"
works for beginning of lines.
- improve BitBake include file detection by also matching forward-slashes
"/" in variable names and assignment operators with a dot ".=" and "=.".
Valid examples, which should match, are:
PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
MACHINEOVERRIDES =. "qemuall:"
BBPATH .= ":${LAYERDIR}"
- parse twenty instead of just three lines, to accommodate for potential
comments at the beginning of files
closes: #18202
Signed-off-by: Martin Schwan <m.schwan@phytec.de>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: fvwm2m4 files are no longer recognized
(after 9.1.1687).
Solution: Add a special case in m4 filetype detection (zeertzjq).
closes: #18146
Co-authored-by: Damien Lejay <damien@lejay.be>
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: autoconf filetype not always correct
Solution: Detect aclocal.m4 as config filetype, detect configure.ac as
config filetype, fall back to POSIX m4 (Damien Lejay).
closes: #18065
Signed-off-by: Damien Lejay <damien@lejay.be>
Signed-off-by: Christian Brabandt <cb@256bit.org>
* searching'**' maybe terrible slow
* searching '**/plugin/' maybe fail
* the pattern for the :packadd/:import/:colorscheme
did not consistently check for a colon, so always use
'\%(:\s*\)\=' before the actual ex command
While at it rename the generic name vim.vim to vimgoto.vim as this more
clearly states what this script is for.
Signed-off-by: Shane-XB-Qian <shane.qian@foxmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: diff format erroneously detected
(Tomáš Janoušek)
Solution: Make the regex to detect normal diff format a bit stricter,
while at it, fix wrong test content from patch v9.1.1606
fixes: #17946
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: a few more files are not recognized
Solution: guess Mail, Info and Terminfo files by its content
(lacygoill)
closes: #17880
Signed-off-by: lacygoill <lacygoill@lacygoill.me>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add complete_check() to ccomplete completion script to avoid UI hangs
and keep Vim responsive as ccomplete can be slow on huge files.
closes: #17826
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: path traversal issue in tar.vim
(@ax)
Solution: warn the user for such things, drop leading /, don't
forcefully overwrite files when writing temporary files,
refactor autoload/tar.vim
tar.vim: drop leading / in path names
A tar archive containing files with leading `/` may cause confusions as
to where the content is extracted. Let's make sure we drop the leading
`/` and use a relative path instead.
Also while at it, had to refactor it quite a bit and increase the
minimum supported Vim version to v9. Also add a test for some basic tar
functionality
closes: #17733
Problem: [security]: path traversal issue in zip.vim (@ax)
Solution: drop leading ../ on write of zipfiles, don't forcefully
overwrite existing files
A zip plugin which contains filenames with leading '../' may cause
confusion as to where the content will be extracted. Let's drop such
things and make sure we use a relative filename instead and don't
forcefully overwrite temporary files. Also, warn the user of such
things.
related: #17733
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Using `\n` is incorrect, as result of getline() does not contain line
breaks and only uses `\n` for NUL bytes.
- Return when b:asmsyntax is set, like many other filetypes.
closes: #17706
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: not all lex files are recognized
Solution: detect *.ll as lex, llvm or lifelines filetype, depending on
the content (Eisuke Kawashima)
closes: #17560
Signed-off-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: wrong link to Chapter 2 in vim-01-beginner.tutor
Solution: Fix the link to Chapter 2, add test for links in tutor files
(Phạm Bình An)
In order to write the test, I expose the function `s:GlobTutorials` as
`tutor#GlobTutorials` and make it also accept a `locale` argument.
closes: #17356
Signed-off-by: Phạm Bình An <111893501+brianhuster@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
While at it, use `:lcd` to temporarily set the window local directory
instead of `:cd` for the global working directory.
fixes: #17334closes: #17339
Signed-off-by: Michele Sorcinelli <michelesr@autistici.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: still some problem with the new tutors filetype plugin
Solution: refactor code to enable/disable tutor mode into
tutor#EnableInteractive() function, include a test
(Phạm Bình An)
I find it annoying that Tutor's interactive mode is always on (or debug
mode is off) even when I open a tutor file with :edit command.
I think it makes more sense to make this "interactive mode":
- Always on when it is opened with :Tutor command
- Off otherwise
For more references, see `:help` feature, it is a much better than
:Tutor, since I don't have to run `:let g:help_debug = 1` just to be able
to edit and save a help file
Therefore, I remove `g:tutor_debug`
closes: #17299
Signed-off-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The CheckVimScriptURL() function does not work properly on
pwershell. Most likely this is because curl is aliased to
Invoke-WebRequest on Powershell and redirection seems to work
slightly different
Solution: Disable CheckVimScriptURL() on Powershell and then simplify
the curl download logic
Signed-off-by: Christian Brabandt <cb@256bit.org>
Tag folding poses a few difficulties. Many elements, e.g.
"blockquote", are always delimited by start and end tags;
end tags for some elements, e.g. "p", can be omitted in
certain contexts; void elements, e.g. "hr", have no end tag.
Although the rules for supporting omissible end tags are
ad-hoc and involved, they apply to elements in scope.
Assuming syntactical wellformedness, an end tag can be
associated with its nearest matching start tag discoverable
in scope and towards the beginning of a file, whereas all
unbalanced tags and inlined tags can be disregarded.
For example:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<p>Paragraph #1. <!-- = : 2 -->
<p> <!-- >3 : 3 -->
Paragraph #2. <!-- = : 3 -->
</p> <!-- <3 : 3 -->
<p>Paragraph #3.</p> <!-- = : 2 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
(HTML comments here, "<!-- ... -->", record two values for
each folded line that are separated by ":", a value obtained
from "&foldexpr" and a value obtained from "foldlevel()".)
Innermost foldedable tags will be flattened. For example:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre><code> <!-- >4 : 4 -->
[CODE SNIPPET] <!-- = : 4 -->
</code></pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
No folding will be requested for the "<code>"-"</code>" tag
pair and reflected by "&foldexpr" because such a fold would
have claimed the same lines that the immediate fold of the
"<pre>"-"</pre>" tag already claims.
Run-on folded tags may confuse Vim. When a file such as:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET #1] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
<!-- = : 3 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET #2] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
is reformatted as follows:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET #1] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div><div class="block"><pre><code> <!-- <3 : 3 -->
[CODE SNIPPET #2] <!-- = : 2 ? -->
</code> <!-- <5 : 2 ? -->
</pre> <!-- <4 : 2 ? -->
</div> <!-- <3 : 2 ? -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
"&foldexpr" values will not be used as is for the lines
between (and including) "[CODE SNIPPET #2]" and "</div>".
(Cf. v9.1.0002.)
Having syntax highlighting in effect, tag folding using the
"fold-expr" method can be enabled with:
------------------------------------------------------------
let g:html_expr_folding = 1
------------------------------------------------------------
By default, tag folding will be redone from scratch after
each occurrence of a TextChanged or an InsertLeave event.
Such frequency may not be desired, especially for large
files, and this recomputation can be disabled with:
------------------------------------------------------------
let g:html_expr_folding_without_recomputation = 1
doautocmd FileType
------------------------------------------------------------
To force another recomputation, do:
------------------------------------------------------------
unlet! b:foldsmap
normal zx
------------------------------------------------------------
References:
https://web.archive.org/web/20250328105626/https://html.spec.whatwg.org/multipage/syntax.html#optional-tagshttps://en.wikipedia.org/wiki/Dangling_elsecloses: #17141
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Shebang filetype detection can be improved
Solution: Improve detection logic (Eisuke Kawashima)
Vim does not correctly detect filetype from
- `#!/usr/bin/env --split-string=awk -f`
- `#!/usr/bin/env -S -i awk -f`
- `#!/usr/bin/env -S VAR= awk -f`
So update the current detection logic to detect those cases.
closes: #17199
Signed-off-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: nroff detection can be improved
Solution: improve nroff detection (Eisuke Kawashima)
- explicitly check roff comments and macros typically found in manpages
- do not try to detect alphabetically-sectioned files, except for n, as
nroff
- l: > 'l' happens to be a section for historical reasons
<https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=391977>
- n: e.g. /usr/share/man/mann/Tcl.n.gz
- o: unsure (perhaps fedora-specific)
- p: unsure (perhaps fedora-specific)
closes: #17160
Signed-off-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This commit changes *.h files to default to C (instead of C++), and
deprecates the existing `g:c_syntax_for_h` and `g:ch_syntax_for_h`
variables in favor of a unified `g:filetype_h`, like is used for other
ambiguous file extensions.
closes: #17135
Signed-off-by: Amelia Clarke <selene@perilune.dev>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: GNU extensions, such as `ifeq` and `wildcard` function, are
highlighted in BSDmakefile
Solution: detect BSD, GNU, or Microsoft implementation according to
filename, user-defined global variables, or file contents
closes: #17089
Co-authored-by: Roland Hieber <rohieb@users.noreply.github.com>
Signed-off-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: some man files are not recognized
(e.g. 1p (POSIX commands))
Solution: update the filetype detection pattern and detect more man
files as nroff (Eisuke Kawashima)
- sections are revised referring to
- debian-12:/etc/manpath.config
- fedora-41:/etc/man_db.conf
- detection logic is improved
- detection test is implemented
closes: #17117
Signed-off-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
On man-db systems, complete with actual man sections and pages, instead
of shell commands.
I tried to come up with a portable solution for multiple man
implementations in https://github.com/vim/vim/discussions/16794 but I
think the differences between implementations were too large to do that
without overly complicated code. So instead, I implemented it for man-db
(which I think is common on Linux) and hopefully left it easier for
other people to implement it on other systems in the future if they want
to.
closes: #16843
Signed-off-by: David Mandelberg <david@mandelberg.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Without this change, pressing K while in one manpage to load another
one, then pressing CTRL-O to go back, results in going to the bottom of
the current (second) manpage. With this change, it goes back to the
previous manpage.
closes: #16791
Signed-off-by: David Mandelberg <david@mandelberg.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
