diff --git a/runtime/doc/arabic.txt b/runtime/doc/arabic.txt index b8fccf241a..59992dba2e 100644 --- a/runtime/doc/arabic.txt +++ b/runtime/doc/arabic.txt @@ -1,4 +1,4 @@ -*arabic.txt* For Vim version 9.1. Last change: 2021 Jun 22 +*arabic.txt* For Vim version 9.1. Last change: 2025 Oct 14 VIM REFERENCE MANUAL by Nadim Shaikli @@ -191,7 +191,7 @@ o Enable Arabic settings [short-cut] To activate the Arabic keymap (i.e. to remap your English/Latin keyboard to look-n-feel like a standard Arabic one), set the - 'keymap' command to "arabic". This is done by entering + 'keymap' option to "arabic". This is done by entering > :set keymap=arabic < diff --git a/runtime/doc/change.txt b/runtime/doc/change.txt index 914cff9c30..ff64628e07 100644 --- a/runtime/doc/change.txt +++ b/runtime/doc/change.txt @@ -1,4 +1,4 @@ -*change.txt* For Vim version 9.1. Last change: 2025 Oct 12 +*change.txt* For Vim version 9.1. Last change: 2025 Oct 14 VIM REFERENCE MANUAL by Bram Moolenaar @@ -1137,12 +1137,12 @@ inside of strings can change! Also see 'softtabstop' option. > current line). This always works |linewise|, thus this command can be used to put a yanked block as new lines. - If no register is specified, it depends on the 'cb' - option: If 'cb' contains "unnamedplus", paste from the - + register |quoteplus|. Otherwise, if 'cb' contains - "unnamed", paste from the * register |quotestar|. - Otherwise, paste from the unnamed register - |quote_quote|. + If no register is specified, it depends on the + 'clipboard' option: If 'clipboard' contains + "unnamedplus", paste from the + register |quoteplus|. + Otherwise, if 'clipboard' contains "unnamed", paste + from the * register |quotestar|. Otherwise, paste from + the unnamed register |quote_quote|. The register can also be '=' followed by an optional expression. The expression continues until the end of the command. You need to escape the '|' and '"' diff --git a/runtime/doc/diff.txt b/runtime/doc/diff.txt index a73a3ce0b1..419373a8de 100644 --- a/runtime/doc/diff.txt +++ b/runtime/doc/diff.txt @@ -1,4 +1,4 @@ -*diff.txt* For Vim version 9.1. Last change: 2025 Oct 12 +*diff.txt* For Vim version 9.1. Last change: 2025 Oct 14 VIM REFERENCE MANUAL by Bram Moolenaar @@ -139,7 +139,7 @@ file for a moment and come back to the same file and be in diff mode again. buffers. The `:diffoff` command resets the relevant options to the values they had when -using `:diffsplit`, `:diffpatch`, `:diffthis`. or starting Vim in diff mode. +using `:diffsplit`, `:diffpatch`, `:diffthis`, or starting Vim in diff mode. When using `:diffoff` twice the last saved values are restored. Otherwise they are set to their default value: diff --git a/runtime/doc/editing.txt b/runtime/doc/editing.txt index 1e36e132a2..6141dcec12 100644 --- a/runtime/doc/editing.txt +++ b/runtime/doc/editing.txt @@ -1,4 +1,4 @@ -*editing.txt* For Vim version 9.1. Last change: 2025 Oct 13 +*editing.txt* For Vim version 9.1. Last change: 2025 Oct 14 VIM REFERENCE MANUAL by Bram Moolenaar @@ -137,7 +137,7 @@ as the original file with 'backupext' appended. The default "~" is a bit strange to avoid accidentally overwriting existing files. If you prefer ".bak" change the 'backupext' option. Extra dots are replaced with '_' on MS-Windows machines, when Vim has detected that an MS-DOS-like filesystem is -being used (e.g., messydos or crossdos) or when the 'shortname' option is on. +being used, or when the 'shortname' option is on. The backup file can be placed in another directory by setting 'backupdir'. *auto-shortname* diff --git a/runtime/doc/if_mzsch.txt b/runtime/doc/if_mzsch.txt index c5e5dedebd..d76816dbec 100644 --- a/runtime/doc/if_mzsch.txt +++ b/runtime/doc/if_mzsch.txt @@ -1,4 +1,4 @@ -*if_mzsch.txt* For Vim version 9.1. Last change: 2025 Oct 12 +*if_mzsch.txt* For Vim version 9.1. Last change: 2025 Oct 14 VIM REFERENCE MANUAL by Sergey Khorev @@ -68,7 +68,7 @@ It is raised for various Vim errors. During compilation, the MzScheme interface will remember the current MzScheme collection path. If you want to specify additional paths use the -'current-library-collection-paths' parameter. E.g., to cons the user-local +"current-library-collection-paths" parameter. E.g., to cons the user-local MzScheme collection path: > :mz << EOF (current-library-collection-paths diff --git a/runtime/doc/if_perl.txt b/runtime/doc/if_perl.txt index 44ea4e9ff2..7f74a9f3bc 100644 --- a/runtime/doc/if_perl.txt +++ b/runtime/doc/if_perl.txt @@ -1,4 +1,4 @@ -*if_perl.txt* For Vim version 9.1. Last change: 2025 Oct 12 +*if_perl.txt* For Vim version 9.1. Last change: 2025 Oct 14 VIM REFERENCE MANUAL by Sven Verdoolaege @@ -18,9 +18,9 @@ Perl and Vim *perl* *Perl* Vim syntax highlighting supports Perl and POD files. Vim assumes a file is Perl code if the filename has a .pl or .pm suffix. Vim also examines the -first line of a file, regardless of the filename suffix, to check if a file is -a Perl script (see scripts.vim in Vim's syntax directory). Vim assumes a file -is POD text if the filename has a .POD suffix. +shebang line of a file, if no filetype has been detected, to check if a file +is a Perl script. Vim assumes a file is POD text if the filename has a .POD +suffix. To use tags with Perl, you need Universal/Exuberant Ctags. Look here: Universal Ctags (preferred): https://ctags.io diff --git a/runtime/doc/indent.txt b/runtime/doc/indent.txt index 0599ac4f3b..afd3954654 100644 --- a/runtime/doc/indent.txt +++ b/runtime/doc/indent.txt @@ -1,4 +1,4 @@ -*indent.txt* For Vim version 9.1. Last change: 2025 Oct 12 +*indent.txt* For Vim version 9.1. Last change: 2025 Oct 14 VIM REFERENCE MANUAL by Bram Moolenaar @@ -717,12 +717,11 @@ Block if, select case, select type, select rank, where, forall, type, interface, associate, block, enum, critical, and change team constructs are indented. The indenting of subroutines, functions, modules, and program blocks is optional. Comments, labeled statements, and continuation lines are -indented if the Fortran is in free source form, whereas they are not indented -if the Fortran is in fixed source form because of the left margin -requirements. Hence manual indent corrections will be necessary for labeled -statements and continuation lines when fixed source form is being used. For -further discussion of the method used for the detection of source format see -|ft-fortran-syntax|. +indented in free source form, whereas they are not indented in fixed source +form because of the left margin requirements. Hence manual indent corrections +will be necessary for labeled statements and continuation lines when fixed +source form is being used. For further discussion of the method used for the +detection of source format see |ft-fortran-syntax|. Do loops ~ All do loops are left unindented by default. Do loops can be unstructured in diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt index 3651f1b095..236340daec 100644 --- a/runtime/doc/syntax.txt +++ b/runtime/doc/syntax.txt @@ -1,4 +1,4 @@ -*syntax.txt* For Vim version 9.1. Last change: 2025 Oct 13 +*syntax.txt* For Vim version 9.1. Last change: 2025 Oct 14 VIM REFERENCE MANUAL by Bram Moolenaar @@ -5916,7 +5916,7 @@ guisp={color-name} *highlight-guisp* If you want to develop a color list that can be relied on by others, it is best to prefix your color names. By convention these color lists are placed in the colors/lists directory. You can see an - example in '$VIMRUNTIME/colors/lists/csscolors.vim'. This list would + example in "$VIMRUNTIME/colors/lists/csscolors.vim". This list would be sourced by a color scheme using: > :runtime colors/lists/csscolors.vim diff --git a/runtime/doc/terminal.txt b/runtime/doc/terminal.txt index 836ca7299c..f7fe330167 100644 --- a/runtime/doc/terminal.txt +++ b/runtime/doc/terminal.txt @@ -1,4 +1,4 @@ -*terminal.txt* For Vim version 9.1. Last change: 2025 Oct 12 +*terminal.txt* For Vim version 9.1. Last change: 2025 Oct 14 VIM REFERENCE MANUAL by Bram Moolenaar @@ -1811,9 +1811,9 @@ Change default signs ~ *termdebug_signs* Termdebug uses the hex number of the breakpoint ID in the signcolumn to represent breakpoints. If it is greater than "0xFF", then it will be -displayed as "F+", due to we really only have two screen cells for the sign. -You may also use decimal breakpoint signs instead, in which case IDs greater -than 99 will be displayed as "9+". +displayed as "F+", because there are only two screen cells available for the +sign. You may also use decimal breakpoint signs instead, in which case IDs +greater than 99 will be displayed as "9+". If you want to customize the breakpoint signs to show `>>` in the signcolumn: > let g:termdebug_config['sign'] = '>>' diff --git a/runtime/doc/windows.txt b/runtime/doc/windows.txt index 243bd58a22..1086662488 100644 --- a/runtime/doc/windows.txt +++ b/runtime/doc/windows.txt @@ -1,4 +1,4 @@ -*windows.txt* For Vim version 9.1. Last change: 2025 Oct 12 +*windows.txt* For Vim version 9.1. Last change: 2025 Oct 14 VIM REFERENCE MANUAL by Bram Moolenaar @@ -127,11 +127,11 @@ This option can be local to the window, so that you can have a different status line in each window. Normally, inversion is used to display the status line. This can be changed -with the 's' character in the 'highlight' option. For example, "sb" sets it to -bold characters. If no highlighting is used for the status line ("sn"), the -'^' character is used for the current window, and '=' for other windows. If -the mouse is supported and enabled with the 'mouse' option, a status line can -be dragged to resize windows. +with the 's' character in the 'highlight' option. For example, "sb" sets it +to bold characters. If no highlighting is used for the status line ("sn"), +the '^' character is used for the current window, and '=' for other windows. +If the mouse is supported and enabled with the 'mouse' option, a status line +can be dragged to resize windows. Note: If you expect your status line to be in reverse video and it isn't, check if the 'highlight' option contains "si". In version 3.0, this meant to @@ -142,7 +142,7 @@ that have termcap codes for italics. *filler-lines* The lines after the last buffer line in a window are called filler lines. By -default, these lines start with a tilde (~) character. The 'eob' item in the +default, these lines start with a tilde (~) character. The "eob" item in the 'fillchars' option can be used to change this character. By default, these characters are highlighted as NonText (|hl-NonText|). The EndOfBuffer highlight group (|hl-EndOfBuffer|) can be used to change the highlighting of