runtime(doc): Wrap some overlength lines in the user manual

closes: #18696

Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>

runtime/doc/usr_02.txt

@@ -1,4 +1,4 @@
-*usr_02.txt*	For Vim version 9.1.  Last change: 2025 Oct 26
+*usr_02.txt*	For Vim version 9.1.  Last change: 2025 Nov 07
 
 
 		     VIM USER MANUAL      by Bram Moolenaar
@@ -522,8 +522,8 @@ Summary:					*help-summary*  >
 <   You can see the user guide topics |03.9| and |usr_27.txt| in the
    introduction.
 
-3) Options are enclosed in single apostrophes.  To go to the help topic for the
+3) Options are enclosed in single apostrophes.  To go to the help topic for
-   list option: >
+   the list option: >
 	:help 'list'
 <   If you only know you are looking for a certain option, you can also do: >
 	:help options.txt

runtime/doc/usr_09.txt

@@ -1,4 +1,4 @@
-*usr_09.txt*	For Vim version 9.1.  Last change: 2025 Oct 26
+*usr_09.txt*	For Vim version 9.1.  Last change: 2025 Nov 07
 
 
 		     VIM USER MANUAL	  by Bram Moolenaar
@@ -132,8 +132,8 @@ select text in a standard manner.  The X Window system also has a standard
 system for using the mouse.  Unfortunately, these two standards are not the
 same.
    Fortunately, you can customize Vim.  You can make the behavior of the mouse
-work like an X Window system mouse or a Microsoft Windows mouse.  The following
+work like an X Window system mouse or a Microsoft Windows mouse.  The
-command makes the mouse behave like an X Window mouse: >
+following command makes the mouse behave like an X Window mouse: >
 
 	:behave xterm
 

runtime/doc/usr_10.txt

@@ -1,4 +1,4 @@
-*usr_10.txt*	For Vim version 9.1.  Last change: 2025 Oct 26
+*usr_10.txt*	For Vim version 9.1.  Last change: 2025 Nov 07
 
 
 		     VIM USER MANUAL	  by Bram Moolenaar
@@ -296,8 +296,8 @@ five lines before the last line in the file.
 
 USING MARKS
 
-Instead of figuring out the line numbers of certain positions, remembering them
+Instead of figuring out the line numbers of certain positions, remembering
-and typing them in a range, you can use marks.
+them and typing them in a range, you can use marks.
    Place the marks as mentioned in chapter 3.  For example, use "mt" to mark
 the top of an area and "mb" to mark the bottom.  Then you can use this range
 to specify the lines between the marks (including the lines with the marks): >
@@ -736,9 +736,10 @@ of the program replaces these lines.
 	line 44			      line 55
 	last line		      last line
 
-The "!!" command filters the current line through a filter.  In Unix the "date"
+The "!!" command filters the current line through a filter.  In Unix the
-command prints the current time and date.  "!!date<Enter>" replaces the current
+"date" command prints the current time and date.  "!!date<Enter>" replaces the
-line with the output of "date".  This is useful to add a timestamp to a file.
+current line with the output of "date".  This is useful to add a timestamp to
+a file.
 
 Note: There is a difference between "!cmd" (e.g. using it without any file
 range) and "{range}!cmd".  While the former will simply execute the external

runtime/doc/usr_22.txt

@@ -1,4 +1,4 @@
-*usr_22.txt*	For Vim version 9.1.  Last change: 2025 Oct 26
+*usr_22.txt*	For Vim version 9.1.  Last change: 2025 Nov 07
 
 
 		     VIM USER MANUAL	  by Bram Moolenaar
@@ -30,15 +30,15 @@ Vim has a plugin that makes it possible to edit a directory.  Try this: >
 
 Through the magic of autocommands and Vim scripts, the window will be filled
 with the contents of the directory.  It looks like this (slightly cleaned up
-so that it fits within 80 chars): >
+so that it fits within 78 chars): >
 
-  " ===========================================================================
+  " ==========================================================================
-  " Netrw Directory Listing                                        (netrw v180)
+  " Netrw Directory Listing                                       (netrw v180)
   "   /path/to/vim/runtime/doc
   "   Sorted by      name
   "   Sort sequence: [\/]$,*,\(\.bak\|\~\|\.o\|\.h\|\.info\|\.swp\)[*@]\=$
   "   Quick Help: <F1>:help -:go up dir D:delete R:rename s:sort-by x:special
-  " ===========================================================================
+  " ==========================================================================
   ../
   ./
   check/

runtime/doc/usr_24.txt

@@ -1,4 +1,4 @@
-*usr_24.txt*	For Vim version 9.1.  Last change: 2025 Oct 26
+*usr_24.txt*	For Vim version 9.1.  Last change: 2025 Nov 07
 
 
 		     VIM USER MANUAL	  by Bram Moolenaar
@@ -567,8 +567,8 @@ that combination.  Thus CTRL-K dP also works.  Since there is no digraph for
 
 	Note:
 	The digraphs depend on the character set that Vim assumes you are
-	using.  Always use ":digraphs" to find out which digraphs are currently
+	using.  Always use ":digraphs" to find out which digraphs are
-	available.
+	currently available.
 
 You can define your own digraphs by specifying the target character with a
 decimal number.  Example: >

runtime/doc/usr_30.txt

@@ -1,4 +1,4 @@
-*usr_30.txt*	For Vim version 9.1.  Last change: 2025 Oct 26
+*usr_30.txt*	For Vim version 9.1.  Last change: 2025 Nov 07
 
 
 		     VIM USER MANUAL	  by Bram Moolenaar
@@ -37,9 +37,9 @@ you give) and captures the results: >
 
 If errors were generated, they are captured and the editor positions you where
 the first error occurred.
-   Take a look at an example ":make" session.  (Typical :make sessions generate
+   Take a look at an example ":make" session.  (Typical :make sessions
-far more errors and fewer stupid ones.)  After typing ":make" the screen looks
+generate far more errors and fewer stupid ones.)  After typing ":make" the
-like this:
+screen looks like this:
 
 	:!make | &tee /tmp/vim215953.err ~
 	gcc -g -Wall -o prog main.c sub.c ~

runtime/doc/usr_40.txt

@@ -1,4 +1,4 @@
-*usr_40.txt*	For Vim version 9.1.  Last change: 2025 Oct 26
+*usr_40.txt*	For Vim version 9.1.  Last change: 2025 Nov 07
 
 
 		     VIM USER MANUAL	  by Bram Moolenaar
@@ -385,8 +385,8 @@ Some of the other options and keywords are as follows:
 	-count={number}		The command can take a count whose default is
 				{number}.  The resulting count can be used
 				through the <count> keyword.
-	-bang			You can use a !.  If present, using <bang> will
+	-bang			You can use a !.  If present, using <bang>
-				result in a !.
+				will result in a !.
 	-register		You can specify a register.  (The default is
 				the unnamed register.)
 				The register specification is available as
@@ -563,9 +563,9 @@ for the cprograms group: >
 
 GROUPS
 
-The {group} item, used when defining an autocommand, groups related autocommands
+The {group} item, used when defining an autocommand, groups related
-together.  This can be used to delete all the autocommands in a certain group,
+autocommands together.  This can be used to delete all the autocommands in a
-for example.
+certain group, for example.
    When defining several autocommands for a certain group, use the ":augroup"
 command.  For example, let's define autocommands for C programs: >
 

runtime/doc/usr_41.txt

@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 9.1.  Last change: 2025 Oct 26
+*usr_41.txt*	For Vim version 9.1.  Last change: 2025 Nov 07
 
 
 		     VIM USER MANUAL	  by Bram Moolenaar
@@ -764,7 +764,8 @@ String manipulation:					*string-functions*
 	charclass()		class of a character
 	match()			position where a pattern matches in a string
 	matchbufline()		all the matches of a pattern in a buffer
-	matchend()		position where a pattern match ends in a string
+	matchend()		position where a pattern match ends in a
+				string
 	matchfuzzy()		fuzzy matches a string in a list of strings
 	matchfuzzypos()		fuzzy matches a string in a list of strings
 	matchstr()		match of a pattern in a string
@@ -841,7 +842,8 @@ List manipulation:					*list-functions*
 	indexof()		index in a List where an expression is true
 	max()			maximum value in a List
 	min()			minimum value in a List
-	count()			count number of times a value appears in a List
+	count()			count number of times a value appears in a
+				List
 	repeat()		repeat a List multiple times
 	flatten()		flatten a List
 	flattennew()		flatten a copy of a List
@@ -1246,7 +1248,8 @@ Mappings and Menus:			    *mapping-functions*
 Testing:				    *test-functions*
 	assert_equal()		assert that two expressions values are equal
 	assert_equalfile()	assert that two file contents are equal
-	assert_notequal()	assert that two expressions values are not equal
+	assert_notequal()	assert that two expressions values are not
+				equal
 	assert_inrange()	assert that an expression is inside a range
 	assert_match()		assert that a pattern matches the value
 	assert_notmatch()	assert that a pattern does not match the value

runtime/doc/usr_44.txt

@@ -1,4 +1,4 @@
-*usr_44.txt*	For Vim version 9.1.  Last change: 2025 Oct 26
+*usr_44.txt*	For Vim version 9.1.  Last change: 2025 Nov 07
 
 
 		     VIM USER MANUAL	  by Bram Moolenaar
@@ -629,10 +629,10 @@ be included in the next Vim version!
 
 ADDING TO AN EXISTING SYNTAX FILE
 
-We were assuming you were adding a completely new syntax file.  When an existing
+We were assuming you were adding a completely new syntax file.  When an
-syntax file works, but is missing some items, you can add items in a separate
+existing syntax file works, but is missing some items, you can add items in a
-file.  That avoids changing the distributed syntax file, which will be lost
+separate file.  That avoids changing the distributed syntax file, which will
-when installing a new version of Vim.
+be lost when installing a new version of Vim.
    Write syntax commands in your file, possibly using group names from the
 existing syntax.  For example, to add new variable types to the C syntax file:
 >