updated for version 7.3.083

Problem:    When a read() or write() is interrupted by a signal it fails.
Solution:   Add read_eintr() and write_eintr().

src/fileio.c

@@ -918,7 +918,7 @@ readfile(fname, sfname, from, lines_to_skip, lines_to_read, eap, flags)
 	    {
 		/* Read the first line (and a bit more).  Immediately rewind to
 		 * the start of the file.  If the read() fails "len" is -1. */
-		len = vim_read(fd, firstline, 80);
+		len = read_eintr(fd, firstline, 80);
 		lseek(fd, (off_t)0L, SEEK_SET);
 		for (p = firstline; p < firstline + len; ++p)
 		    if (*p >= 0x80)
@@ -1373,7 +1373,7 @@ retry:
 		    /*
 		     * Read bytes from the file.
 		     */
-		    size = vim_read(fd, ptr, size);
+		    size = read_eintr(fd, ptr, size);
 		}
 
 		if (size <= 0)
@@ -4000,7 +4000,7 @@ buf_write(buf, fname, sfname, start, end, eap, append, forceit,
 #ifdef HAS_BW_FLAGS
 			write_info.bw_flags = FIO_NOCONVERT;
 #endif
-			while ((write_info.bw_len = vim_read(fd, copybuf,
+			while ((write_info.bw_len = read_eintr(fd, copybuf,
 								BUFSIZE)) > 0)
 			{
 			    if (buf_write_bytes(&write_info) == FAIL)
@@ -4813,7 +4813,7 @@ restore_backup:
 #ifdef HAS_BW_FLAGS
 			write_info.bw_flags = FIO_NOCONVERT;
 #endif
-			while ((write_info.bw_len = vim_read(fd, smallbuf,
+			while ((write_info.bw_len = read_eintr(fd, smallbuf,
 						      SMBUFSIZE)) > 0)
 			    if (buf_write_bytes(&write_info) == FAIL)
 				break;
@@ -5330,7 +5330,7 @@ time_differs(t1, t2)
 
 /*
  * Call write() to write a number of bytes to the file.
- * Also handles encryption and 'encoding' conversion.
+ * Handles encryption and 'encoding' conversion.
  *
  * Return FAIL for failure, OK otherwise.
  */
@@ -5702,16 +5702,8 @@ buf_write_bytes(ip)
 	crypt_encode(buf, len, buf);
 #endif
 
-    /* Repeat the write(), it may be interrupted by a signal. */
-    while (len > 0)
-    {
-	wlen = vim_write(ip->bw_fd, buf, len);
-	if (wlen <= 0)		    /* error! */
-	    return FAIL;
-	len -= wlen;
-	buf += wlen;
-    }
-    return OK;
+    wlen = write_eintr(ip->bw_fd, buf, len);
+    return (wlen < len) ? FAIL : OK;
 }
 
 #ifdef FEAT_MBYTE
@@ -6662,8 +6654,8 @@ vim_rename(from, to)
 	return -1;
     }
 
-    while ((n = vim_read(fd_in, buffer, BUFSIZE)) > 0)
-	if (vim_write(fd_out, buffer, n) != n)
+    while ((n = read_eintr(fd_in, buffer, BUFSIZE)) > 0)
+	if (write_eintr(fd_out, buffer, n) != n)
 	{
 	    errmsg = _("E208: Error writing to \"%s\"");
 	    break;
@@ -10304,3 +10296,55 @@ file_pat_to_reg_pat(pat, pat_end, allow_dirs, no_bslash)
     }
     return reg_pat;
 }
+
+#if defined(EINTR) || defined(PROTO)
+/*
+ * Version of read() that retries when interrupted by EINTR (possibly
+ * by a SIGWINCH).
+ */
+    long
+read_eintr(fd, buf, bufsize)
+    int	    fd;
+    void    *buf;
+    size_t  bufsize;
+{
+    long ret;
+
+    for (;;)
+    {
+	ret = vim_read(fd, buf, bufsize);
+	if (ret >= 0 || errno != EINTR)
+	    break;
+    }
+    return ret;
+}
+
+/*
+ * Version of write() that retries when interrupted by EINTR (possibly
+ * by a SIGWINCH).
+ */
+    long
+write_eintr(fd, buf, bufsize)
+    int	    fd;
+    void    *buf;
+    size_t  bufsize;
+{
+    long    ret = 0;
+    long    wlen;
+
+    /* Repeat the write() so long it didn't fail, other than being interrupted
+     * by a signal. */
+    while (ret < (long)bufsize)
+    {
+	wlen = vim_write(fd, buf + ret, bufsize - ret);
+	if (wlen < 0)
+	{
+	    if (errno != EINTR)
+		break;
+	}
+	else
+	    ret += wlen;
+    }
+    return ret;
+}
+#endif

src/memfile.c

@@ -1049,7 +1049,7 @@ mf_read(mfp, hp)
 	PERROR(_("E294: Seek error in swap file read"));
 	return FAIL;
     }
-    if ((unsigned)vim_read(mfp->mf_fd, hp->bh_data, size) != size)
+    if ((unsigned)read_eintr(mfp->mf_fd, hp->bh_data, size) != size)
     {
 	PERROR(_("E295: Read error in swap file"));
 	return FAIL;
@@ -1168,7 +1168,7 @@ mf_write_block(mfp, hp, offset, size)
     }
 #endif
 
-    if ((unsigned)vim_write(mfp->mf_fd, data, size) != size)
+    if ((unsigned)write_eintr(mfp->mf_fd, data, size) != size)
 	result = FAIL;
 
 #ifdef FEAT_CRYPT

src/memline.c

@@ -2062,7 +2062,7 @@ swapfile_info(fname)
     fd = mch_open((char *)fname, O_RDONLY | O_EXTRA, 0);
     if (fd >= 0)
     {
-	if (read(fd, (char *)&b0, sizeof(b0)) == sizeof(b0))
+	if (read_eintr(fd, &b0, sizeof(b0)) == sizeof(b0))
 	{
 	    if (STRNCMP(b0.b0_version, "VIM 3.0", 7) == 0)
 	    {
@@ -4392,7 +4392,7 @@ findswapname(buf, dirp, old_fname)
 		fd = mch_open((char *)fname, O_RDONLY | O_EXTRA, 0);
 		if (fd >= 0)
 		{
-		    if (read(fd, (char *)&b0, sizeof(b0)) == sizeof(b0))
+		    if (read_eintr(fd, &b0, sizeof(b0)) == sizeof(b0))
 		    {
 			/*
 			 * If the swapfile has the same directory as the

src/os_unix.c

@@ -4454,7 +4454,7 @@ mch_call_shell(cmd, options)
 		    ++noread_cnt;
 		    while (RealWaitForChar(fromshell_fd, 10L, NULL))
 		    {
-			len = read(fromshell_fd, (char *)buffer
+			len = read_eintr(fromshell_fd, buffer
 # ifdef FEAT_MBYTE
 				+ buffer_off, (size_t)(BUFLEN - buffer_off)
 # else

src/proto/fileio.pro

@@ -54,4 +54,6 @@ int au_exists __ARGS((char_u *arg));
 int match_file_pat __ARGS((char_u *pattern, regprog_T *prog, char_u *fname, char_u *sfname, char_u *tail, int allow_dirs));
 int match_file_list __ARGS((char_u *list, char_u *sfname, char_u *ffname));
 char_u *file_pat_to_reg_pat __ARGS((char_u *pat, char_u *pat_end, char *allow_dirs, int no_bslash));
+long read_eintr __ARGS((int fd, void *buf, size_t bufsize));
+long write_eintr __ARGS((int fd, void *buf, size_t bufsize));
 /* vim: set ft=c : */

src/undo.c

@@ -1386,7 +1386,7 @@ u_write_undo(name, forceit, buf, hash)
 		char_u	mbuf[UF_START_MAGIC_LEN];
 		int	len;
 
-		len = vim_read(fd, mbuf, UF_START_MAGIC_LEN);
+		len = read_eintr(fd, mbuf, UF_START_MAGIC_LEN);
 		close(fd);
 		if (len < UF_START_MAGIC_LEN
 		      || memcmp(mbuf, UF_START_MAGIC, UF_START_MAGIC_LEN) != 0)

src/version.c

@@ -714,6 +714,8 @@ static char *(features[]) =
 
 static int included_patches[] =
 {   /* Add new patch number below this line */
+/**/
+    83,
 /**/
     82,
 /**/

src/vim.h

@@ -1642,6 +1642,11 @@ int vim_memcmp __ARGS((void *, void *, size_t));
 # define USE_INPUT_BUF
 #endif
 
+#ifndef EINTR
+# define read_eintr(fd, buf, count) vim_read((fd), (buf), (count))
+# define write_eintr(fd, buf, count) vim_write((fd), (buf), (count))
+#endif
+
 #ifdef MSWIN
 /* On MS-Windows the third argument isn't size_t.  This matters for Win64,
  * where sizeof(size_t)==8, not 4 */