We want to strongly encourage writers of warnings to create warning
categories, so remove the flagless nasm_warn() and change nasm_warnf()
to nasm_warn().
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
The -Ov option is useful but was undocumented.
Add an initialization to keep gcc from complaining at optimization
level -Og.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
For debugging preprocessed code, it is useful to be able to ignore
%line directives rather than having to filter them out externally.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Make strlist_free() take a pointer to a pointer, so we can set it to
NULL.
Buffer warnings on a strlist until we either get an error or we are in
pass 2. Hopefully this should let us get rid of a lot of the ERR_PASS*
bullshit, which far too often causes messages to get lost.
asm/labels.c contains one example of a warning that cannot be made
correct with a specific pass number.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Make it a selectable option at allocation time if a strlist should
contain only unique strings or not. If not, we omit the hash table and
strlist_find() will not do anything.
Add printf()-style functions to a strlist.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
It is extremely desirable to allow the user fine-grained control of
warnings, but this has been complicated by the fact that a warning
class has had to be defined in no less than three places (error.h,
error.c, nasmdoc.src) before it can be used in source code. Instead,
use a script to define these via magic comments at the point of use.
This hopefully will encourage creating new classes as needed.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Change the severity parameter to the error function from "int" to an
unsigned typedef, currently uint32_t.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
It is possible on memory exhaustion that nasm_fatal() might cause
another allocation error, thus calling nasm_alloc_failed() again. If
we find us in nasm_alloc_failed() for a second time, try to get a
message out and then call abort().
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
The prefix ERR_WARN_ is unnecessarily long and may be a disincentive
to create new warning categories. Change it to WARN_*, it is still
plenty distinctive.
This is equivalent to nasm-2.14.xx checkin 77f53ba6d4cb90e5a7e09b33357ed7c1fe9f6b9d.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
ERR_HERE is used to mark messages of the form "... here" so that we
can emit sane output to the list file with filename and line number,
instead of a nonsensical "here" which could point almost anywhere.
This patch contains some changes from the one in the master branch to
make the code cleaner.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The differences between nasm_verror_{gnu,vc} are a short handful of
strings, so unify them. Remove some additional ERR_NOFILE that are not
necessary.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This allows us to do soft-migration of warnings to errors; they will
now be nonfatal errors by default, but gives the user the option to
demote them.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Putting WARN_OTHER at the end of the list creates a number of
advantages and simplifications:
1. It is more user friendly! It is far more of a logical location for
the default case to be at the end of the printed list.
2. The value 0 can be used in a number of places to indicate a
non-suppressible event. By having warning_state[0] always contain
WARN_ST_ENABLED, we can always do the table lookup, even.
3. It means non-warnings (except fatal/panic) can now be conditioned
on warning states. In those cases, WARN_*, including WARN_OTHER,
can be added to the mask for any category. This is especially
useful for notes.
The only downside is that we have to explicitly detect the case where
we have ERR_WARNING but no WARN_ flag. This is a trivial test.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
The prefix ERR_WARN_ is unnecessarily long and may be a disincentive
to create new warning categories. Change it to WARN_*, it is still
plenty distinctive.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
The currently-unused strtbl was basically a slightly different version
of strlist, with the find and linearize capabilities. Merge these two
together by augmenting strlist to have the same capabilities.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
ERR_HERE is used to mark messages of the form "... here" so that we
can emit sane output to the list file with filename and line number,
instead of a nonsensical "here" which could point almost anywhere.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The differences between nasm_verror_{gnu,vc} are a short handful of
strings, so unify them. Remove some additional ERR_NOFILE that are not
necessary.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The current error handlers are much smarter about missing filenames,
and thus using ERR_NOFILE just makes it harder for the programmer.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Add a new severity level "note", intended to be used to give
additional information about a previous error.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
If warnings are errors, print [-w+error=xxxx] and prefix error:.
Use the same spacing for filename and non-filename error messages.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Create our own ctype table where we can do the tests we want to do
cheaply, instead of calling ctype functions and then adding additional
tests all over the code.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-E -MD should work and output a dependency file.
-MD can be used without a filename; there is a default filename or
-\c{-MF} can be used.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The input file is provided by nasm_error(), we should not include it
in the printf list (compiler warning + wrong message.)
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
If no output filename is specified, then a default filename is used
based on the input filename. If that ends up the *same* as the input
filename, change the output filename to "nasm.out".
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
* nasm-2.14.xx:
preproc: command-line preproc directive after system-generated
gorcunov@: Had to fix include_path StrList conversion,
it is a bit ugly by now, will rework.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
BR 3392527: make sure that all command-line specified preprocessing
directives are processed after the system-generated ones. In
particular __OUTPUT_FORMAT__ was generated after command line pass 2,
at which point -p, -d, -u, --pragma and --before had already been
processed.
There is no reason to split up defined_macros() anymore: the right
place to execute it is simply between command line passes 1 and 2. We
can also set dfmt here, which lets us define a __DEBUG_FORMAT__ macro
as well.
Finally move some options that have no business being processed in
pass 2 to pass 1.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Use a hash table to enforce uniqueness in a string list. It is still
an ordered list, however, and can be walked in insertion order.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
* nasm-2.14.xx: (83 commits)
NASM 2.14rc16
doc: Update changes
preproc: expand_smacro -- Fix nil dereference on error path
eval: Eliminate division by zero
doc: Update changes
opflags: Convert is_class and is_reg_class to helpers
preproc: Fix out of range access in expand mmacro
doc: Update changes
parser: Fix sigsegv on certain equ instruction parsing
labels: Make sure nil label is never passed
labels: Don't nil dereference if no label provided
macho: Add warning message in macho_output()
macho/reloc: Fix addr size sensitive conditions
macho/reloc: Fix macho_output() to get the offset adjustments by add_reloc()
macho/reloc: Fixed offset adjustment in add_reloc()
macho/reloc: Allow absolute relocation when forcing a symbol reference
macho/reloc: Adjust SUB relocation information
macho/reloc: Fixed in handling GOT/GOTLOAD/TLV relocations
macho/reloc: Simplified relocation for REL/BRANCH
macho/sym: Record initial symbol number always
...
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
An equ without label may cause nil dereference
| equ 0x100
Fixes 98578071b9d71ecaa2344dd9c185237c1765041e
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Before the commit 81b62b9f54ac8e4019a9b2ec2b95ec0faa86bd2a
we've been always putting -E,-e results into stdout if no
output file provded. So bring this backward compatibility
back.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
While configuring optimization in a level is conventional,
a certain optimization tends to conflict with some pragma.
For example, jump match conflicts with Mach-O's
"subsections-via-symbols" macro.
This configurability will workaround such conflicts.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
