Consolidated two separate but similar functions in nasm and ndisasm
into a commonly linked source code.
To encode and decode the compressed displacement (disp8*N) for EVEX,
N value should be derived using various conditions.
Signed-off-by: Jin Kyu Song <jin.kyu.song@intel.com>
When tuple type is indicated in the bytecode, disp8 is
treated as a compressed disp and gets calculated back to disp8*N.
Signed-off-by: Jin Kyu Song <jin.kyu.song@intel.com>
Disassembler can translate EVEX prefix, count up to 32 vector registers
and recognize new ZMM / opmask registers.
Signed-off-by: Jin Kyu Song <jin.kyu.song@intel.com>
As BND prefix validity check conflicts with jcc8 prefix,
IF_BND is added for the instruction templates which can have
bnd prefix for preserving the content of bound register.
Signed-off-by: Jin Kyu Song <jin.kyu.song@intel.com>
BND prefix is used for adding bounds checking protection
across flow control changes such as call, ret, jmp and jcc calls.
Signed-off-by: Jin Kyu Song <jin.kyu.song@intel.com>
Add support for emitting split EA format in the disassembler,
indicated by the MIB instruction flag.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Jin Kyu Song <jin.kyu.song@intel.com>
Increased the size of data type for instruction flags from 32bits to 64bits.
And a new type (iflags_t) is defined for better maintainability.
Bigger data type is needed because more instruction set types are coming
but there were not enough space for them. Since they are not bit masks,
only one instruction set is allowed for each instruction.
Signed-off-by: Jin Kyu Song <jin.kyu.song@intel.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
According to XED and experimentation, the 66 is ignored.
Signed-off-by: Ben Rudiak-Gould <benrudiak@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
It was there to support the SSE5 DREX encoding,
which as far as I know is dead forever.
Signed-off-by: Ben Rudiak-Gould <benrudiak@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
This patch is getting rid of the following bytecodes
'pushseg','popseg','pushseg2','popseg2' and simplifies
overall code.
[gorcunov@: a few style fixes]
Signed-off-by: Ben Rudiak-Gould <benrudiak@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
It doesn't seem worth >200 lines of C and Perl to save ~50 lines in insns.dat.
In order to make this work I had to rename sbyte16/sbyte32 so that
they can take an ordinary size suffix (their size suffix was formerly
treated specially).
This fixes one disassembly bug: 48C7C000000080 disassembles to mov
rax,0x80000000, which reassembles to B800000080, which loads a
different value.
Signed-off-by: Ben Rudiak-Gould <benrudiak@gmail.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
In long mode relative offsets are always 32 bits sign-extended to 64
bits and absolute near addresses are always 64 bits, regardless of the
operand size.
Signed-off-by: Ben Rudiak-Gould <benrudiak@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
This adds "np" to a bunch of SSE-style instructions that should have
it, "norep" (which was implemented but unused) on quasi-SSE instructions
that use F2 and F3 as instruction extensions but 66 for operand size,
"nof3" (newly implemented) on a few instructions, "norexw" on some
instructions that have only 32-bit and 64-bit versions, and one NOLONG.
It also removes some incorrect "np"s, changes some "f3"s to "f3i"s,
and fixes the decoding of the XCHG/NOP/PAUSE mess: F390 is always
PAUSE even when rex.b=1 (at least according to XED).
Signed-off-by: Ben Rudiak-Gould <benrudiak@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Since we are back to three bytecodes, move them back to the \271-\273
slot to free up the \264 complete quad.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The way our matching system works we have to make NOHLE an instruction
flag rather than an byte code; by the time we run the byte code
interpreter we have already picked an instruction pattern once and for
all.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The a2/a3 mem_offs MOV opcodes are invalid with XRELEASE; those
instructions instead have to use a modrm form. Therefore give a way
to annotate those instruction patters so the pattern matcher will move
on to the next pattern, rather than selecting them and then issue a
warning.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This implements the mechanism for XACQUIRE/XRELEASE. It does not
include the necessary annotations in insns.dat.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
When we don't have an immediate for the i-field in /is4, then use a
normal quad-bytecode encoding for it to save some small amount of
space and re-use existing machinery.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The DREX encoding never hit production silicon, and has been replaced
by VEX/XOP encoding, so remove support for it.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
A lot of instructions ignore the L bit in the VEX prefix, just like
a lot of instructions ignore the W bit, so don't use them in the
sub-table select.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Fix handling of byte codes 250-253 (sign-extended 32-bit immediate,
extended to 64 bits) and 324 (instruction must have osize 64).
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Hopefully this should catch all of them... but please keep an eye out
for any other uses of int32_t for the operand flags.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
At moment we can't overrun buffer even if we would like to
but better to stay on a safe side and use snprintf.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
*To the best of my knowledge*, we now have authorization from everyone
who has significantly contributed to NASM in the past. As such,
change the license to the 2-clause BSD license.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Add copyright headers to the *.c/*.h files in the main directory. For
files where I'm sure enough that we have all the approvals, I have
given them the 2-BSD license, the others have been given the "LGPL for
now" license header. Most of them can probably be changed after
auditing.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Fix the disassembly of JRCXZ; in 64-bit mode, we should only accept
JECXZ for disassembly with 32-bit address size override.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Add a byte code to explicitly support instructions which only uses the
low 8-bit registers (as if a REX prefix always was present.) This is
usable for instructions which are officially documented as using "the
low byte of a 32-bit register" and so on.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Use lower case for VEX and XOP ("vex", "xop") to avoid visual
confusion (and in the future potential real confusion) with upper-case
hexadecimal numbers.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Handle AMD's XOP prefixes; they use basically the same encoding as VEX
prefixes, so treat them simply as a variant of VEX.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
WAIT is technically an instruction, but from an assembler standpoint
it behaves as if it had been a prefix. In particular, it has to be
ordered *before* any real hardware prefixes.
