Make the handling of messages saner. In particular, regularize the
handling of info and debug messages, so that nasm_info() and
nasm_debug() actually become useful.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
This bit needs to be masked *except* when:
- There is no V operand
- The modr/m has mod == 3 OR there is an scc
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Fix the handling of legacy map prefixes (0F, 0F 38, 0F 3A).
Fix 8-bit GPRs decoding (REX vs no-REX versions.)
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
IP-relative values, both jump addresses and RIP-relative memory
addressing, are relative to the end of the instruction.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
- Correct the parsing of VEX map numbers
- Strip the size bits from register names that don't have
intrinsic size
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
NOP disassembly is a little "special" because it sits as part of the
XCHG instructions. Add a flag to bail out of the disassembler search
early, and ignore the 0330 bytecode.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
An x86 instruction can be up to 15 bytes long + WAIT
pseudo-prefix. Add an option to make the hex dump wide enough to
accommodate all 16 possible bytes.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
With these changes, the disassembler correctly decodes the ccmp.asm
and apx.asm tests.
Fix rebuilding the main tools from test/Makefile.in.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
- Significantly overhauled the disassembler internals to make
better use of the information already in the instruction template
and to reduce the implementation differences with the assembler
- Add APX support to the disassembler
- Fix problem with disassembler truncating addresses of jumps
- Fix generation of invalid EAs in 16-bit mode
- Fix array overrun for types in a few modules
- Fix invalid ND flag on near JMP
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Merge the macros used in the assembler and disassembler.
Simplify and slightly correct the byte order/unaligned handling macros.
Use <stdbit.h> from C23 if available for bytesex.h and ilog2.h.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Fix incorrect truncations of address sizes, and completely unnecessary
annotations about the size of displacements when not default.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Merge a bunch of common code in the handling of modr/m
generation. Make the handing of compressed disp8 simpler and more
transparent by exporting a the shift factor for the compressed
immediate in ea_data. For the case of no compression, the shift factor
is simply 0; there is no need to distinguish "compressed" from
"uncompressed".
The tidied up version of the disp8 code is simple enough that it makes
more sense to inline it.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
At least three files (asm/assemble.c, disasm/disasm.c, and
x86/insns.pl) depend on the bytecode defintions. It makes a lot more
sense for them to live in an explicit documentation file in the x86/
directory.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Instead of handling conditional instructions ad hoc, generate
individual instruction patterns as normal. This simplifies the code
and makes CMPccXADD support simpler (otherwise it would be necessary
to hack in the handling of a condition code in the middle of an
instruction.)
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The FP16 patch had a case of bit overlap. Clean up the handling of
broadcast flags a little in the process.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Add support for AVX512-FP16 instructions and the associated
handling. Allow "mapN" syntax as well as "mN" syntax to match the
documentation.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Changing the type of `to_read` from `uint32_t` to
`int32_t` makes it aware of negative numbers and fixes
the buffer overflow in ndisasm.
Signed-off-by: T Turek <tureqsec@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
The binary mode has no difference from text mode in
POSIX-compliant operating systems. The two modes are
distinguishable from each other on Windows, and perhaps
on other systems as well.
The binary stream has scalability and other advantages.
Windows treats the standard input stream as text mode by
default. So the code changes it to binary mode.
Also, add a helper function, nasm_set_binary_mode(),
that is OS-agnostic, in the library.
Reported-by: Didier Stevens <didier.stevens@gmail.com>
Suggested-by: Didier Stevens <didier.stevens@gmail.com>
Link: https://bugzilla.nasm.us/show_bug.cgi?id=3392649
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Since pp_error_list_macros() was introduced, the only need for
pp_verror() is to suppress error messages in certain contexts. Replace
this function with a preprocessor callback,
preproc->pp_suppress_error(), so we can drop the nasm_verror()
function pointer entirely.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Introduce a new error level, ERR_CRITICAL, beyond which we will
minimize the amount of code that will be executed before we die; in
particular don't execute any memory allocations, and if we somehow end
up recursing, abort() immediately.
Basically, "less than panic, more than fatal."
At this point this level is used by nasm_alloc_failed().
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
"compiler.h" already includes a bunch of common include files. There
is absolutely no reason to duplicate them in individual files, and in
fact it robs us of central control of how these files are used.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
For almost everything we should use "nctype.h". Right now we don't
have a nasm_toupper() to use <ctype.h> for things that need toupper().
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
There is absolutely no reason not to include <string.h> globally, and
with the inline function for mempcpy() we need it there anyway.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Change the severity parameter to the error function from "int" to an
unsigned typedef, currently uint32_t.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Create our own ctype table where we can do the tests we want to do
cheaply, instead of calling ctype functions and then adding additional
tests all over the code.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Support the +n syntax for multiple contiguous registers, and emit it
in the output from ndisasm as well.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Move directive processing to its own file, and move nasmlib/error.c to
asm/error.c (it was not used by the disassembler); remove some extern
declarations from .c files, and do some general code cleanups.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This fixes disassembly of instructions like jmp/call when target address
is larger than 2^32-1, and also printing of current address when it's
large.
After this change ndisasm still assumes that the files to disassemble
will never reach 4GiB: only offsets are made 64 bit, but not lengths.
https://bugzilla.nasm.us/show_bug.cgi?id=3392349
Signed-off-by: Ruslan Kabatsayev <b7.10110111@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
fixes pvs-studio error 'V502 Perhaps the '?:' operator works in a different way
than it was expected. The '?:' operator has a lower priority than the '!=' operator.'
Signed-off-by: Martin Lindhe <martin-commit@ubique.se>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
pvs-studio: V519 The 'mod' variable is assigned values twice successively.
Perhaps this is a mistake. Check lines: 398, 405.
Signed-off-by: Martin Lindhe <martin-commit@ubique.se>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Make the source code easier to understand and keep track of by
organizing it into subdirectories depending on the function.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
