* Added support for gopher URLs.
* Add setting and make this user settable instead
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Ensure settings for Service and Mailer are read on the install page
NewContext does not set the mailer or service settings so add
a new function that will run this.
Fix#15894
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
There are a couple of settings in `[indexer]` relating to the `issue_indexer` queue
which override settings in unpredictable ways. This PR adjusts this hierarchy and makes
explicit that these settings are deprecated.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Set self-adjusting deadline for connection writing
In #16055 it appears that the simple 5s deadline doesn't work for large
file writes. Now we can't - or at least shouldn't just set no deadline
as go will happily let these connections block indefinitely. However,
what seems reasonable is to set some minimum rate we expect for writing.
This PR suggests the following algorithm:
* Every write has a minimum timeout of 5s (adjustable at compile time.)
* If there has been a previous write - then consider its previous
deadline, add half of the minimum timeout + 2s per kb about to written.
* If that new deadline is after the minimum timeout use that.
Fix#16055
* Linearly increase timeout
* Make PerWriteTimeout, PerWritePerKbTimeouts configurable
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
As revealed by #15964 there is inconsistent use of filepath Join and path Join
for these directories. The best thing to do is to use filepath.Join but then ToSlash
them for consistency.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
This PR suggests a change to the default configuration for queues:
* Use a common DATADIR for the queues
* Set starting workers to 0 and make boost a single worker
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add a new internal hook to save ssh log
as title, when a ssh error ocure like #15785.
only when switch ``RUN_MODE`` to dev can we
found which error is ocure. But this way is
not a good idea for production envirment.
this changes try save ssh error mesage to the
log file like other log by a new internal hook.
I think it's usefull for find error message
in production envirment. Thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
* rename and fix nit
* Update modules/private/hook.go
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Refactored handleOAuth2SignIn in routers/user/auth.go
The function handleOAuth2SignIn was called twice but some code path could only
be reached by one of the invocations. Moved the unnecessary code path out of
handleOAuth2SignIn.
* Refactored user creation
There was common code to create a user and display the correct error message.
And after the creation the only user should be an admin and if enabled a
confirmation email should be sent. This common code is now abstracted into
two functions and a helper function to call both.
* Added auto-register for OAuth2 users
If enabled new OAuth2 users will be registered with their OAuth2 details.
The UserID, Name and Email fields from the gothUser are used.
Therefore the OpenID Connect provider needs additional scopes to return
the coresponding claims.
* Added error for missing fields in OAuth2 response
* Linking and auto linking on oauth2 registration
* Set default username source to nickname
* Add automatic oauth2 scopes for github and google
* Add hint to change the openid connect scopes if fields are missing
* Extend info about auto linking security risk
Co-authored-by: Viktor Kuzmin <kvaster@gmail.com>
Signed-off-by: Martin Michaelis <code@mgjm.de>
* _ to unused func options
* rm useless brakets
* rm trifial non used models functions
* rm dead code
* rm dead global vars
* fix routers/api/v1/repo/issue.go
* dont overload import module
Implements request #14320 The rendering of CSV files does match the diff style.
* Moved CSV logic into base package.
* Added method to create a tabular diff.
* Added CSV compare context.
* Added CSV diff template.
* Use new table style in CSV markup.
* Added file size limit for CSV rendering.
* Display CSV parser errors in diff.
* Lazy read single file.
* Lazy read rows for full diff.
* Added unit tests for various CSV changes.
in previouse if a log subsetcion not set level
it will use ``info`` as default value.
this pr will make default value (``[log] -> LEVEL``) useable.
example config:
```INI
[log]
MODE = console
LEVEL = Trace
[log.console]
LEVEL =
STDERR = false
```
previous result:
```JSON
// console:
{
"level": "info",
...................
}
```
after change:
```JSON
// console:
{
"level": "track",
...................
}
```
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add reverse proxy configuration support for remote IP address validation
* Trust all IP addresses in containerized environments by default
* Use single option to specify networks and proxy IP addresses. By default trust all loopback IPs
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This is an alternative PR to #13687.
Add `[ui.explore]` settings to allow restricting the
explore pages to logged in users only and to disable the users explore page.
The two proposed settings are:
- `REQUIRE_SIGNIN_VIEW`: Only allows access to the explore pages if the
user is signed in. Also restricts
- `/api/v1/user/search`
- `/api/v1/users/{username}`
- `/api/v1/users/{username}/repos`
- but does not restrict `/api/v1/users/{username}/heatmap`
- `DISABLE_USERS_PAGE`: Disables the /explore/users page
Fix#2908Close#13687
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Make SSH server host key path configurable
* make it possible to have multiple keys
* Make gitea.rsa the default key
* Add some more logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
Add SameSite setting for cookies and rationalise the cookie setting code. Switches SameSite to Lax by default.
There is a possible future extension of differentiating which cookies could be set at Strict by default but that is for a future PR.
Fix#5583
Signed-off-by: Andrew Thornton <art27@cantab.net>
MakeAbsoluteAssetURL should just url join the static url prefix on to appurl
if it is not an absolute path - this is because StaticURLPrefix is an absolute
prefix not a relative prefix to the app sub url.
Fix#14422
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create Xorm session provider
This PR creates a Xorm session provider which creates
the appropriate Session table for macaron/session.
Fix#7137
Signed-off-by: Andrew Thornton <art27@cantab.net>
* extraneous l
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use key instead of ID to be compatible with go-macaron/session
Signed-off-by: Andrew Thornton <art27@cantab.net>
* And change the migration too.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update spacing of imports
Co-authored-by: 6543 <6543@obermui.de>
* Update modules/session/xorm.go
Co-authored-by: techknowlogick <matti@mdranta.net>
* add xorm provider to the virtual provider
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prep for master merge
* prep for merge master
* As per @lunny
* move migration out of the way
* Move to call this db session as per @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Gitea allows to whitelist email domains so that only email addresses from certain domains are allowed to register an account, but does not currently allows to do the opposite: blacklisting email domains so that addresses from certain domains are *forbidden* to register an account.
The idea has been briefly mentioned in the discussion about issue #6350, but never implemented. This PR does that.
The rationale is that, in my experience of running a Gitea instance, *a single email domain* is responsible for *most* of the spam accounts, and for *all* of the spam accounts that manage to get past the email confirmation step. So on top of the other spam mitigation measures already available (email confirmation, CAPTCHA, etc.), having the option to block a particularly annoying domain would be helpful.
close#13628
* Added option to disable web hooks
This mod introduces DISABLE_WEB_HOOKS parameter in [security] section
of app.ini (by default set to false). If set to true it disables web
hooks feature. Any existing undelivered web hook tasks will be cancelled.
Any existing web hook definitions will be left untouched in db but
its delivery tasks will be ignored.
Author-Change-Id: IB#1105130
* Webhook spelling fixed
Webhook spelling fixed.
Fixes: 07df6614dc
Related: https://github.com/go-gitea/gitea/pull/13176#pullrequestreview-510868421
Author-Change-Id: IB#1105174
* Parameter description fixed
Parameter description fixed.
Fixes: 07df6614dc
Related: https://github.com/go-gitea/gitea/pull/13176#pullrequestreview-514086107
Author-Change-Id: IB#1105174
Memcached TTL cannot be > 30 days and if it is attempted the TTL is interpreted as
a unix timestamp.
This PR ensures that the TTL is switched to a unix timestamp in those cases.
Fix#14571
Signed-off-by: Andrew Thornton <art27@cantab.net>
Use [chi](https://github.com/go-chi/chi) instead of the forked [macaron](https://gitea.com/macaron/macaron). Since macaron and chi have conflicts with session share, this big PR becomes a have-to thing. According my previous idea, we can replace macaron step by step but I'm wrong. :( Below is a list of big changes on this PR.
- [x] Define `context.ResponseWriter` interface with an implementation `context.Response`.
- [x] Use chi instead of macaron, and also a customize `Route` to wrap chi so that the router usage is similar as before.
- [x] Create different routers for `web`, `api`, `internal` and `install` so that the codes will be more clear and no magic .
- [x] Use https://github.com/unrolled/render instead of macaron's internal render
- [x] Use https://github.com/NYTimes/gziphandler instead of https://gitea.com/macaron/gzip
- [x] Use https://gitea.com/go-chi/session which is a modified version of https://gitea.com/macaron/session and removed `nodb` support since it will not be maintained. **BREAK**
- [x] Use https://gitea.com/go-chi/captcha which is a modified version of https://gitea.com/macaron/captcha
- [x] Use https://gitea.com/go-chi/cache which is a modified version of https://gitea.com/macaron/cache
- [x] Use https://gitea.com/go-chi/binding which is a modified version of https://gitea.com/macaron/binding
- [x] Use https://github.com/go-chi/cors instead of https://gitea.com/macaron/cors
- [x] Dropped https://gitea.com/macaron/i18n and make a new one in `code.gitea.io/gitea/modules/translation`
- [x] Move validation form structs from `code.gitea.io/gitea/modules/auth` to `code.gitea.io/gitea/modules/forms` to avoid dependency cycle.
- [x] Removed macaron log service because it's not need any more. **BREAK**
- [x] All form structs have to be get by `web.GetForm(ctx)` in the route function but not as a function parameter on routes definition.
- [x] Move Git HTTP protocol implementation to use routers directly.
- [x] Fix the problem that chi routes don't support trailing slash but macaron did.
- [x] `/api/v1/swagger` now will be redirect to `/api/swagger` but not render directly so that `APIContext` will not create a html render.
Notices:
- Chi router don't support request with trailing slash
- Integration test `TestUserHeatmap` maybe mysql version related. It's failed on my macOS(mysql 5.7.29 installed via brew) but succeed on CI.
Co-authored-by: 6543 <6543@obermui.de>
* refactor models.DeleteComment and delete related reactions too
* use deleteComment for UserDeleteWithCommentsMaxDays in DeleteUser
* nits
* Use time.Duration as other time settings have
* docs
* Resolve Fixme & fix potential deadlock
* Disabled by Default
* Update Config Value Description
* switch args
* Update models/issue_comment.go
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* Add support for ed25519_sk and ecdsa_sk SSH keys
These start with sk-ssh-ed25519@openssh.com and sk-ecdsa-sha2-nistp256@openssh.com.
They are supported in recent versions of go x/crypto/ssh and OpenSSH 8.2
or higher.
* skip ssh-keygen
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Add pager to the branches page
* override pageSize if bigger than max
* Make branches commit range configurable
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: silverwind <me@silverwind.io>
* Implement ghost comment mitigation
Adds a config option USER_DELETE_WITH_COMMENTS_MAX_DAYS to the [service] section. See https://codeberg.org/Codeberg/Discussion/issues/24 for the underlying issue.
* cleanup
* use setting module correctly
* add to docs
Co-authored-by: Moritz Marquardt <git@momar.de>
* Change to display SVG files as images
* Remove unsafe styles from SVG CSP
* Add integration test to test SVG headers
* Add config setting to disable SVG rendering
* Add test for img tag when loading SVG image
* Remove the Raw view button for svg files since we don't fully support this
* Fix copyright year
* Rename and move config setting
* Add setting to cheat sheet in docs
* Fix so that comment matches cheat sheet
* Add allowing styles in CSP based on pull request feedback
* Re-enable raw button since we show SVG styles now
* Change so that SVG files are editable
* Add UI to toggle between source and rendered image for SVGs
* Change to show blame button for SVG images
* Fix to update ctx data
* Add test for DetectContentType when file is longer than sniffLen
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
* Consolidate Logos and update README header
- Remove unused `logo-lg.png`, `logo-sm.png` and `logo-192.png`.
- Consolidate `favicon.svg` and `logo.svg` to just `logo.svg`.
- Remove Safari Mask icon, it seems to work fine with just `favicon.png` (no SVG support).
- Remove Fluid Icon. It only served Firefox and SVG works just fine there.
- Update customization instructions.
- Update README.md to use SVG icon, increase logo size and center it and badges.
* Update README_ZH.md
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Update README_ZH.md
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Inline manifest.json
Improve performance by eliminating this separate request and just inline
this small JSON in HTML directly as a data uri.
Also update previously static app name scripts to use AppName.
I've confirmed this as working via "Add to Homescreen" feature which
offered to save the shortcut under the new app name.
* prerender manifest data on startup
* move to settings
* restore setting.AppStartTime and use it on admin page
* use double quotes because template.URL escapes everything
* fix lint
* move variable to global context variable
* delete template file
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
The design is very flexible, but not implemented correctly.
This commit fixes several issues:
* Costom storage type stated in https://docs.gitea.io/en-us/config-cheat-sheet/#storage-storage
not working
* [storage.attachments], [storage.minio] section not respected
Signed-off-by: 胡玮文 <huww98@outlook.com>
* Added option to disable migrations
This patch introduces DISABLE_MIGRATIONS parameter in [repository]
section of app.ini (by default set to false). If set to true
it blocks access to repository migration feature.
This mod hides also local repo import option in user editor if
local repo importing or migrations is disabled.
* Alter Example config
DISABLE_MIGRATIONS set to false in example config to
match its default value.
* HTTP error 403 instead of 500 on denied access to migration
* Parameter DISABLE_MIGRATIONS exposed via API
Fixes: 04b04cf854
Author-Change-Id: IB#1105130
* Add register manual confirm settings option
The new settings option is used when manually approving new
registrations.
* Enable manual confirmation of new registered user
When manual registration confirmation is desired (by default `false`)
create new user in the database that is *not active*. The user must then
be activated manually.
This change speeds up the process of adding new confirmed users for
Gitea instances without external auth mechanism. (Currently the option
is to manually create new user by admin.)
* Update docs/content/doc/advanced/config-cheat-sheet.zh-cn.md
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Store repository data in data path if not previously set
* update docs
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: silverwind <me@silverwind.io>
* update docs
Co-authored-by: silverwind <me@silverwind.io>
One perennial issue is users running the install page,
changing the database dialect and then suffering with issues
This PR simply resets all of the database.Use flags on
initDBConfig. This should prevent this issue from occuring.
Fix#13788Fix#5480
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
I think it's a bad default to have "dev" as the default run mode which
enables debugging and now also disables HTTP caching. It's better to
just default to a value suitable for general deployments.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* add black list and white list support for migrating repositories
* fix fmt
* fix lint
* fix vendor
* fix modules.txt
* clean diff
* specify log message
* use blocklist/allowlist
* allways use lowercase to match url
* Apply allow/block
* Settings: use existing "migrations" section
* convert domains lower case
* dont store unused value
* Block private addresses for migration by default
* fix lint
* use proposed-upstream func to detect private IP addr
* a nit
* add own error for blocked migration, add tests, imprufe api
* fix test
* fix-if-localhost-is-ipv4
* rename error & error message
* rename setting options
* Apply suggestions from code review
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This enabled HTTP time-based cache for storage assets, primarily
avatars. I have not observed If-Modified-Since from browsers during
tests but I guess it's good to support regardless.
It introduces a new generic httpcache module that can handle both
time-based and etag-based caching.
Additionally, manifest.json and robots.txt are now also cachable.
Because newGit() invoked twice (inside PreInstallInit() and
GlobalInit()) and git parameters is global object, all
git commands call with duplicated args
`-c credential.helper= -c protocol.version=2`
* Fix minio bug
* Add tests for storage configuration
* Change the Seek flag to keep compitable minio?
* Fix test when first-byte-pos of all ranges is greater than the resource length
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This PR fixes several bugs in setting storage
* The default STORAGE_TYPE should be the provided type.
* The Storage config should be passed in to NewStorage as a pointer - otherwise the Mappable interface function MapTo will not be found
* There was a bug in the MapTo function.
Fix#13286
Signed-off-by: Andrew Thornton <art27@cantab.net>
Go-version constraints ignore pre-releases.
Rather than change the library further this PR simply changes
the git version comparison to use simple version compare ignoring the
issue of pre-releases.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Avatar support minio
* Support repo avatar minio storage
* Add missing migration
* Fix bug
* Fix test
* Add test for minio store type on avatars and repo avatars; Add documents
* Fix bug
* Fix bug
* Add back missed avatar link method
* refactor codes
* Simplify the codes
* Code improvements
* Fix lint
* Fix test mysql
* Fix test mysql
* Fix test mysql
* Fix settings
* Fix test
* fix test
* Fix bug
* Provide self-registering storage system
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More simplification
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove old strings from setting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* oops attachments not attachment
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR updates golangci-lint to the latest version 1.31.0.
The upgrade introduced a new check for which I've fixed or disabled most cases.
Signed-off-by: kolaente <k@knt.li>
* Add ssh certificate support
* Add ssh certificate support to builtin ssh
* Write trusted-user-ca-keys.pem based on configuration
* Update app.example.ini
* Update templates/user/settings/keys_principal.tmpl
Co-authored-by: silverwind <me@silverwind.io>
* Remove unused locale string
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* Add missing creation of SSH.Rootpath
* Update cheatsheet, example and locale strings
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
* Optimizations based on feedback
* Validate CA keys for external sshd
* Add filename option and change default filename
Add a SSH_TRUSTED_USER_CA_KEYS_FILENAME option which default is
RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem
Do not write a file when SSH_TRUSTED_USER_CA_KEYS is empty.
Add some more documentation.
* Remove unneeded principalkey functions
* Add blank line
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Add SSH_AUTHORIZED_PRINCIPALS_ALLOW option
This adds a SSH_AUTHORIZED_PRINCIPALS_ALLOW which is default
email,username this means that users only can add the principals
that match their email or username.
To allow anything the admin need to set the option anything.
This allows for a safe default in gitea which protects against malicious
users using other user's prinicipals. (before that user could set it).
This commit also has some small other fixes from the last code review.
* Rewrite principal keys file on user deletion
* Use correct rewrite method
* Set correct AuthorizedPrincipalsBackup default setting
* Rewrite principalsfile when adding principals
* Add update authorized_principals option to admin dashboard
* Handle non-primary emails
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add the command actually to the dashboard template
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* By default do not show principal options unless there are CA keys set or they are explicitly set
Signed-off-by: Andrew Thornton <art27@cantab.net>
* allow settings when enabled
* Fix typos in TrustedUserCAKeys path
* Allow every CASignatureAlgorithms algorithm
As this depends on the content of TrustedUserCAKeys we should allow all
signature algorithms as admins can choose the specific algorithm on their
signing CA
* Update models/ssh_key.go
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix linting issue
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Disable DSA ssh keys by default
OpenSSH has disabled DSA keys since version 7.0
As the docker runs openssh > v7.0 we should just disable
DSA keys by default.
Refers to #11417
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Just disable DSA keys by default
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove DSA type
* Fix Tests
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
Since the move to common leveldb and common redis the disk queue code (#12385)
will check the connection string before defaulting to the DATADIR.
Therefore we should ensure that the connection string is kept empty
unless it is actually set.
Unforunately the issue indexer was missed in #13025 this PR fixes this omission
Fix#13062
Signed-off-by: Andrew Thornton <art27@cantab.net>
Since the move to common leveldb and common redis the disk queue code
will check the connection string before defaulting to the DATADIR.
Therefore we should ensure that the connection string is kept empty
unless it is actually set.
Fix#13023
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add configurable Trust Models
Gitea's default signature verification model differs from GitHub. GitHub
uses signatures to verify that the committer is who they say they are -
meaning that when GitHub makes a signed commit it must be the committer.
The GitHub model prevents re-publishing of commits after revocation of a
key and prevents re-signing of other people's commits to create a
completely trusted repository signed by one key or a set of trusted
keys.
The default behaviour of Gitea in contrast is to always display the
avatar and information related to a signature. This allows signatures to
be decoupled from the committer. That being said, allowing arbitary
users to present other peoples commits as theirs is not necessarily
desired therefore we have a trust model whereby signatures from
collaborators are marked trusted, signatures matching the commit line
are marked untrusted and signatures that match a user in the db but not
the committer line are marked unmatched.
The problem with this model is that this conflicts with Github therefore
we need to provide an option to allow users to choose the Github model
should they wish to.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Adjust locale strings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Co-authored-by: 6543 <6543@obermui.de>
* Update models/gpg_key.go
* Add migration for repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* LFS support to be stored on minio
* Fix test
* Fix lint
* Fix lint
* Fix check
* Fix test
* Update documents and add migration for LFS
* Fix some bugs
* Restrict TLS connections to 1.2 minimum
* Set Argon2 as the default KDF
* Fix user.yml
* Remove TLS minversion changes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add migration as per @techknowlogick
Signed-off-by: Andrew Thornton <art27@cantab.net>
* set the password algo in the fixtures
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove the v148 migration - it needs recreate table to change the defaults
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Nadim Kobeissi <nadim@symbolic.software>
* Support elastic search for code search
* Finished elastic search implementation and add some tests
* Enable test on drone and added docs
* Add new fields to elastic search
* Fix bug
* remove unused changes
* Use indexer alias to keep the gitea indexer version
* Improve codes
* Some code improvements
* The real indexer name changed to xxx.v1
Co-authored-by: zeripath <art27@cantab.net>
MySQL in its infinite wisdom determines that UTF8 does not
mean UTF8. Our install scripts know about this and will set
CHARSET to utf8mb4 if we users choose this but... users who
do not explicitly set this variable will default to utf8mb3
without knowing it.
This PR changes the unset CHARSET value to utf8mb4 if users
choose to use mysql.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Disable password complexity check default
These features enourange bad passwords/are annoying for people using better password methods, and at minimum we shouldn't force that as a default for obvious reasons. Disable any default check to avoid regular complaints.
* fix copy paste format
* docs: update heading
This section covers more paths than the 3 listed in the heading.
* setting: change PIDFile default from /var/run/gitea.pid to /run/gitea.pid
On most modern distributions, /var/run is deprecated and only kept for
backwards compat according to
https://refspecs.linuxfoundation.org/FHS_3.0/fhs/ch05s13.html, and is a
symlink to `/run/` on modern distributions.
Old Distros that still don't have `/run` can update the gitea default as
described in from-source.en-us.md to point to the old location.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add a storage layer for attachments
* Fix some bug
* fix test
* Fix copyright head and lint
* Fix bug
* Add setting for minio and flags for migrate-storage
* Add documents
* fix lint
* Add test for minio store type on attachments
* fix test
* fix test
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add warning when storage migrated successfully
* Fix drone
* fix test
* rebase
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* remove log on xorm
* Fi download bug
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* Add URL function to serve attachments directly from S3/Minio
* Add ability to enable/disable redirection in attachment configuration
* Fix typo
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* don't change unrelated files
* Fix lint
* Fix build
* update go.mod and go.sum
* Use github.com/minio/minio-go/v6
* Remove unused function
* Upgrade minio to v7 and some other improvements
* fix lint
* Fix go mod
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Tyler <tystuyfzand@gmail.com>
#12391 offered to change the default PID file from /var/run/gitea.pid however in discussion it was decided that this could break users of older systems. An alternative was offered that we could make the PID file compile/link time settable.
This PR does this, and changes the name of the setting from CustomPID to simply PIDFile. It also updates the from-source docs to show how to change the compiler settings to do this.
Closes#12391
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Florian Klink <flokli@flokli.de>
